Choosing the right flooring type isn't enough for your living condition. You will have to consider the types of cut: flat sawn, rift and quarter sawn, quarter sawn or live sawn. Quarter sawn and rift & quarter sawn will be best choices, because expansion and contraction is along the thickness of the wood. You will need climate control all year round. 70 degrees at 40 % relative humidity is where you want to be throughout the year. The use of a humidifier/dehumidifier will be needed year round. Although, engineered flooring is more stable than solid. Using the wrong wood specie in your living condition can run the risk of de-laminating with engineered wood. If, the top veneer is more or less stable than it's core and backing. You will experience de-laminating in extreme humidity swings. Take in account of what the engineered flooring is constructed of: mdf or plywood. The width of the flooring will account for how much expansion and contracting also. 2 1/4" strips are the most stable. As you go wider, expect to see more wider seasonal gaps. Proper acclimating is critical, should be performed with a moisture meter. For 2 1/4" strip flooring , sub-floor and flooring moisture should be within 4%. For all other widths 2% moisture differentiation is allowed or should not be exceeded. Don't forget proper expansion gaps, which is the thickness of your flooring, example: 3/4" thick = 3/4" gap. Sub-floor type and condition will affect the performance of wood floors. All this needs to be considered for the proper and successful performance of your wood floors.

I'm a fan of Hickory. Love it! I love it's STRONG variation! Yep. Variation is the word that can be used for Hickory. If you are going for "mid-tone" then it means the Hickory is stained. No problem. That's fine. Hickory takes a stain very nicely. But it will still have plenty of variation. The stain will even that out a little bit, but not entirely. The finish is UV cured urethane. I'm not very excited about that finish. If you are going for factory finish, you will want to work with the TOUGHEST finishes on the market (that's why you go with factory finished...for the TOUGH finish). The UV cured urethane is a ho-hum type of finish. Average would be the best way to describe it. The thickness of the plank is 3/4" = normal for sold. The plank width is 5" with random lengths UPTO 60" (5ft). That tells me there will be many planks in the 3' - 4' range. Again, this is ho-hum average. And with a wide plank product, it will need "glue assist". And Hickory certainly needs it because it has a bit more movement (less stable) than white oak. And then there is the "low gloss" format. The low-gloss finish on this depth of colour = nightmare to live with. It will show dust, etc as well as oily foot prints, sock prints, paw prints and will look hazy at certain times during the day. The "haze" is part of the chemical make up of the finish itself = that's how they take away the gloss...they haze it with a chemical additive. The haze goes away when you sand and refinish the floor. That's the only way to fix it. If you must have a mid-tone floor, I would recommend a TOUGHER finish (aluminum oxide or ceramic infused polyurethane) in a satin. Satin is FAR MORE livable. It offers a lovely glow without being shiny. It hides skin oils (like paw prints from dogs) because it is the same gloss level as skin oils....it isn't hazy....you get the idea.

Kim,,,it's very solid. just make sure the glue is spread to completely cover the plank. I have a few spots (like under the kitchen sink) where they missed the corner and it squeaks. They've held up great. I don't have dogs, but I have cats and have heard their nails burning rubber across the floor they go off on their tangents. I've spilled water, cleaned up their barf, spilled food, whatever, it all cleans up very well. as for dents, only if you drop something very heavy. but any wood floor will dent. I vacuum w/a Dyson, and then I use Bona wood floor cleaner on a mop. in the kitchen, i'll often take the scrubby brush and watered down Dawn to clean up spills or oil stains. no problem. no, I don't baby them. I don't wear shoes in my house though. I love my floors. just make sure on install they clean up all the glue residue. my guys were messy and lazy. had to call them back w/special glue remover and rag and go over the entire floor.

I'm not sure what LVT is. :) I have an appointment with the flooring person for Saturday to test out samples. Cherie, we hate forced hot air because it bothers my and the kids' asthma and allergies so I am actually very happy about these baseboard radiators as radiant heat is much easier on the lungs since it's not blowing hot air all over the place. There is central air for the summer months. We live in Northern NH... it gets cold here for sure. I am going to keep the tile in the kitchen for now and the rest will be new flooring *all going in the same direction* ! We are ripping out the red carpeting, which is in all four bedrooms as well as on the stairs. We want to replace that with flooring and we don't want yet another type of flooring in the house so it makes sense to do the living and dining room as well. When we reconfigure the kitchen, we'll have to match it up and remove the tile at that time.