That's what the power down and up is for to get everything on the same settings. I am pretty sure what is needed is to select the new network on the printer setting and then enter the new password for the new network. It won't be able to get online until it has been updated with that information. You should have a control center for the printer on the laptop, it installed it when you installed the printer software. Go into the control panel of the printer, not the computer control panel! Select the network interface information select the new network in the list of available networks when you do that it will pop up asking for the password enter the correct password and connect. Using an ethernet cable from the printer directly into the back of the router should let you use it with out doing any of that it would be directly plugged into the network, so no wireless password needed.

In our latest build, I concentrated on: 1. Wiring, for now and the future. Upgraded as far as we could go-CAT6 (alas, residential fiber not yet affordable, 2 years ago) and made sure that we planned for things we wanted as well as what, perhaps, a future buyer might want. We are with Google Fiber, currently, but all fiber networks can work with this wiring. We'd lived through the "intercom" stage (early 80s) and wanted nothing like that. Control panels swerve all systems, are out of the way and except for an additional alarm system panel (panic room? :) ), none is in the master, nor is any of it visible. The whole house could be run by apps, for those who have the appetite for apps. I don't... Most importantly, we did the planning before the walls went in. 2. Concentrated on not putting in anything that might become obsolete, fast. At one point, our low voltage guy recommended a built-in iPad, to run the house. Lol- NO! 3. Put 240V in the car area. Electric cars are becoming more and more something people want, and are common in my city. HAH! We decided to test the technology, soon after move-in. Got an EV. Our public utility paid for half the costs of the station/install. We're having a blast with the car, and Federal credits made it stupidly affordable. Now- the Utility told us that if we sell too soon OR go solar, they "might" ask for their money back. Understandable because... 4. Made sure that solar is a reasonable option, without tearing our house apart. Go back to #1- it all matters, works. We're have a great rating for solar (because of design) and can easily do it. Didn't do it with the initial build, because that technology is rapidly changing. 5. Nest Thermostats- we have them. Took a minute for me to understand the programming, but it works great. 6. Made sure that our HVAC system had the best, cleanest and easiest to operate technology available. Without an app, it works with our windows, even, to prevent the "fogging" that happens when it's 100 degrees outside and 72 inside. Also works to control humidity in our really humid climate. 6. Not what you'd think of as "technology", but we have a very natural possibility of a third story rooftop deck. We don't want it (I HATE holes in roofs- problems abound, even in the best of cases), but somebody else might. So while the walls were open, we took the time to have a tiny bit of engineering, a bit of steel reinforcement installed, and presto! That space is ready to go, for anybody who wants to do it. All of this was done at really affordable prices, since it was planned for, installed in the beginning. All of it wrapped up in a really nice, long-term Builder's Warranty. Not nearly as affordable if you don't do it and then discover you want "more". That, then, becomes a type of a remodel remodel- hell on earth, for me! The only thing we installed that could become obsolete are ceiling speakers. We love music, and it plays through our home a lot. Can hook to the TV, so a football game (or movie) sounds like a home theater, without all the mess. Eh- the speakers could become out-of-date, but they're there, so a quick switch out and off you go.

We have already adopted a lot of this into our design. Big Don Aslett fans here, too. And yes, having a room that can be converted to an older kid bedroom is useful even when they share. In our case it’s going to be the LEGO room off the play area - it’s for big kid projects and things the littles shouldn’t be into, and I’ll convert it for the college student or two of the bunch down the road. Otherwise it’s three bunks per bedroom and a bathroom for each. Girls room, boys room, extra flex room, and if absolutely necessary, the guest bedroom/craft room/handicapped accessible extra master for our special little guy :) We were thinking over space and privacy in the shared rooms and came to the decision that full beds over a desk and drawer area were the best choice, possibly with curtains rails around the top if they want to pull them for some privacy. Then there is a schoolwork area, personal drawer space, and a mini ‘room’ for the child while still living together. That’s how we made it work in the dorms and I think it was a good setup. It also means we don’t need absolute enormous closets since those are only for hanging dresses and out of season gear. If it comes time to sell it makes the room a lot more functional as a normal master suite and not some sort of freakish planned communal room. YES to a bike loop in the yard, even if the yard is small. Perimeter tracks are SO useful. YES to a drinking fountain in the mud room (outside isn’t useful if your area freezes like ours does). YES to laundry by the bedrooms - we are doing one laundry area in the hall to the master suite, on the main floor, and another laundry area in the upstairs between the kid rooms. They’re many feet apart so two makes sense, and we can barely keep up on laundry with a single machine anyway. Many more amens and agreements to the other list items. When the design is well planned and lives well for the family the square footage becomes less of an issue. I can exist in half the house if I have twice the storage ;) And as another Speed Queen devotee, I cant recommend them highly enough!

I have a positive update. I tried the "download & go" feature for the first time in a while and it finally worked! So Whirlpool is making some progress. What's funny is that at one point a Whirlpool support person insisted this is not one of the washer's features even though it's in all the literature and is an option for the washer in the app. But the washer and dryer still have minds of their own. I have videos that will make you shake your head at all the malfunctions. Last night I put a BIG load of wet laundry in the dryer and I couldn't get the dryer to start because the touchscreen was acting up. After much frustration the dryer reset itself and started working again, but not before I practically threw something at it and feared I'd have this big load of wet laundry with no way to dry it. UGH! Maybe one of these days these things will work as expected but Whirlpool is very slow in fixing this stuff. I'm afraid the touchscreen issues aren't fixable because they chose to use low end components to save a few pennies. Time will tell. Update: This is ridiculous. I left that load of laundry in the dryer overnight and just unloaded it. After I opened the dryer, I got a notification on my phone that the drying was complete. How convenient that 24 hours later, after I've unloaded the dryer, the dryer lets me know the laundry is done! This is like a comedy routine. But not funny :-(