Basically, a 'mud job' is just putting a thin veneer of compound over wallboard..it can also be called a 'skim coat'. It is basically joint compound, rarely it is plaster. Yes the guy has referrals, but what were the projects? Were they sensitive work on old houses to yield something which is like what might have been the original appearance, or were they gut jobs and remodels with no respect for the original house? From what you've said of him, I suspect the latter. Ripping out and replacing work with newer materials often yields an inferior result and costs more money than a decent job--he is pushing for the fastest methods to do the work, like someone who is primarily a 'flipper' of houses, not a true professional. Despite your saying he isn't profiting somewhere with his subcontractors or materials, I don't believe it for a second...he is going to make money somewhere, otherwise he wouldn't be doing the job. Based on the information provided as to his recommendations for the work to be done, he IS suggesting things which aren't needed. With a baby on the way, and new home owners, he is seeing a prime opportunity to make some fast money. Did you get estimates from other contractors and painters? That is an absolute MUST for any project. I know I'm sounding negative to you, but it is just common sense--I used to be a trusting person, but being burned one time too many changed that--and since a house is your biggest investment, you don't want to take ANY chances with such a big ticket expense. With a new addition to the family coming, you absolutely MUST save where you can, unless you have deep pockets, which you say you don't. Just a queston of curiosity: who put the idea in your head that the walls lead paint was a danger which had to be addressed by a complete removal? Paint chips are eliminated with vacuuming, unless you let them accumulate for weeks...and painted trim is going to be more likely to give them especially at corners...but again, the solution is to make sure the paint is sound and has a firmly adhered new layer.

Hi everybody! I have been waiting all summer for it to cool off. It seems that the heat makes my dizziness and nausea worse. I have lost about 15 lbs with being too sick to eat throughout the summer. I just this week got my helper here to help me clean the garage and then I moved the vanity out there and sanded it a bit in the easy places, and got it up on a table. I got the brass floor protectors pried off the bottom of the legs and was pleased to find no holes have been drilled in them. That means that I can drill holes for the feet I bought. I have adjustable feet that will give the vanity an extra 1/2" of height, and that can be screwed up to give another 1/2" if we want. That would make the legs appear to float way too high in the air, so I don't think it will work. the extra 1/2" will have to suffice, with the ability to make the vanity level so that the sink will drain properly. I have also decided that the bail-type handles that came with it are not going to work for us. I can't see us fumbling around trying to grab the bail that has recessed back into the grooves of the handle around it, standing there with water or soap in our eyes. A knob is much easier to use. I had Hubby try using the bail and he vetoed it on the first try and said, "replace 'em!" I am using these on doors of a set of shallow cupboards that will be recessed into the closet of the the neighboring bedroom. I figured they were a sure bet for the six drawers, too. I am not going to use the center drawer anymore, what with all the plumbing going on above it, so I will just fill in those holes. I need to cut away the bottom of the drawer space, then move the drawer support piece to the left or right. It is at dead center right now, and the sink's drain will need to go there. I just have to sand down the fluted areas of the vanity table, then it will be ready to be primed and painted. I am still leaning toward painting it the violet Peace and Happiness. I have purchased more components for the plumbing. I have all of the shower controls and the rain shower head and regular shower head. Still need to get the hand-held and some safety hand-hold bars for the shower area. I still have not finalized a wall tile (looking at fake Cararra tile for the room's walls) or floor tile or the surface for the top of the vanity. We HAVE concluded, though, that we cannot get this job done until Toby, our ever-more-confused beagle/golden retriever mix, dies. He will be 16 at the end of this month. He has spinal arthritis and began vomiting every time he was given his Tramadol or his glucosamine/chondroitin pills, then quit taking them. He had to go on prednisone to control the pain. He is peeing a lot in the house, always on a rug or quilted mattress pad put down for him. The bathroom is his main place to pee. I will not have my new floor grout saturated with dog pee. I don't think the poor guy would cope well with the construction, either. He is now blind in one eye and somewhat deaf. It would be too confusing for him to do all that construction. So even though I can't get Jim over here to do the work, if I could, I would not be able to do it until Toby passes on. So, instead, we are getting new gutters and trim, and getting our four remaining windows replaced. We did the other three windows when we remodeled the kitchen and made the living room into the library/music room. I am in the process of cleaning and decluttering so the window guys can get in to measure!

there should be many terrazzo people in FL, since it's such a big thing down there. look for marble restoration companies and see if they do terrazzo. I do know one thing. They aren't cheap. I'd keep as much as you can. I wouldn't worry about having a tub, unless you absolutely need one. if you have room in the master, just have the guest bath all shower

@apple_pie_order bare minimum I need to fix botched leveling mix on floor (it's too tough to break up and remove so has to be smoothed out), level the toilet flange, secure the sheet vinyl (it's already cut & loosely placed- just needs to be secured), hook up water supply lines under sink, and install the toilet. I want to get water working for the sink before I mess with leveling mix again bc I want to have water just in case. Shower can't be used bc it needs new surround & controls-- it's not hooked up to water anymore. I do have the supply lines for my sink, but I need my friend to come remove the old copper lines and hook up the new supply lines. I don't have the flexibility to squeeze in and do it myself. But he mistakenly reversed the lines so I need to get that remedied- which should only take a few minutes. So, to have a working sink and toilet isn't too far off. I need to find the tape for securing the vinyl sheet flooring though. Stuff keeps disappearing on me. I do plan to do some things a little at a time. Like do the countertop raising, new formica install, and put the new sink in before doing the rest of the master bathroom. The other bathroom still needs some finish work, electrical, paint, etc, but it can be made usable semi-simply if I can fix the floor. While the master bathroom countertop is being worked on (I plan to take it to the workshop) I could set up something with a bucket for hand-washing temporarily. We keep water in bottles around the area for washing hands when power is out (pumps can't run when power is out so we lose running water too).