Well it was a loooooong weekend but everything went as planned and was accomplished. We ended up stapling the heavy plastic up we had left over from the moisture barrier behind the walls. Then I used the last of it and fashioned a shower curtain and stapled that to the ceiling. End result is a workable bathroom and some extra spackling to cover up some staple holes next weekend when the shower is tiled. Totally gutted Saturday morning: End of the day Saturday progress after plumber done with the new tub and piping rough in, floor 70% done, half the ceiling and part of the wall green board up: End of Sunday Progress new floor totally in, all green board and Hardie board up, toilet in temporarily (need to take it out again next weekend to do beadboard and floor grouting), and plastic hung: "Shower Curtain" up:

This old thread got revisited. @dani_m08 to answer the question about extra probe, I believe I ordered an extra one when I bought the set up. The probe wire is just setting in the junction box I think but honestly I cant remember. When I laid out the underfloor heating and the probe, I just ran another probe near the first probe, and it was then sealed into the floor self leveling compound as per instructions. then the end was just threaded into the wall like the one that would be live, and not connected, but just laying there in the box. Regarding the tile layout. I just decided to run it this way, after getting instructions on the 90Degree way, IIRC. The herringbone that I love is from my childhood and the side walks in my neighborhood that all ran at 45Degree. so that to me is herringbone. I know you posted on @sochi thread about her amazing bathroom and a wall mounted faucet. I would totally do it if I had the right sink for it. In my case I had made my sink out of soapstone and an integrated backsplash. The pictures of this bathroom reveal are no longer available because of the use of photo bucket, when it was Gardenweb. I did not keep my account with photo bucket. I'll add some of the reveal pictures so you can see the sink and floor. Regarding the sink there is no ledge for water to drip from my hands when using the faucet. The water drips right into the sink. In my other bathroom with a deck mounted faucet I am always wiping up drips and it is a nuisance. I much prefer the setup for this sink. Below: I love the flush finish from the faucet to the bottom of the sink. nothing drips on a counter or edge of a sink. Below: looking in from the doorway. Below: Here I am finishing up the sink. the backsplash was epoxied on as a separate piece. The whole soapstone install in the room took next to nothing to buy as they were all small pieces that I epoxied together with a 3 part stone epoxy. Below: this is the counter at the tub, and is in 2 long pieces but I was able to epoxy them together at there edges to make a wide slab for the top. All the soapstone was finished with a 60 grit sandpaper to be rough and this lovely soft tone of blue/green/gray/white. I did not oil it so this color tone would remain light. Below: If I recall correctly @sochi helped me decide on this Hubberton Forge Mirror. I have 3 different metals in this room, but they are all a cool silver to black color. Below: the center of this tower shares space with the kitchen on the other side of the wall. there is also some extra space that houses some electrical wiring. this is an old simple house. this bathroom was an add on when it got move to the farm in the 30s IIRC. The plumbing was all rearrange and some of the details that were orignially there I kept but updated it, such as this tower feature. The old one went and the carpenter did a wonderful job with this one. Below: This feature was another thing I kept from the old bathroom but flipped it from the other end and had the carpenter put drawers in it. Before it was a hell hole. things got lost and the build was soooo old and creapy I didn't like using it for storage. Now it is perfect for storage.

Here's the post I put on the bathroom forum (including the picture): Hi All, We have a grand old 1860s Italianate house with an absolutely atrocious master bath. We are planning a modest remodel hoping to get the most bang for the buck. One issue (of many) that we are facing is that while the tub is not a clawfoot, it was never used for a shower. We'd like to keep the tub but add a shower somehow. We realize that this also means tiling the walls around the tub and doing something at the far end of the tub to make sure that the water doesn't spray into the rest of the room (since the tub is only enclosed on 2 sides). I'd love to hear ideas and see pictures of similar remodels! Here's a pic (don't laugh...we are not responsible for any of the decorating choices).

Rebeccamom - My project is scheduled for just after Labor Day. I had to move it out because of work and a family vacation. The extra time has been really great for sourcing and research and I would strongly encourage a 4-6 month window if at all possible. It seems there are so many decisions to be made in a bathroom reno. As far as measurements, my bathroom is a bowling alley! 4.5 feet wide by 11 feet long, not including the shower which is 4 X 2.75 off the long wall. Just to clarify, the $10K estimate is for labor only. I'm trying not to add up the cost of materials as I acquire them. It's painful having expensive taste on a middle class budget!