Lady Gibbs- thanks for the pix! Your floors look great! That is the only problem I have with LVP is the weird sheen it has when light hits it. I found this brand today, Moduleo. It is really nice and I love the way it looks! Decisions to be made..hmmmm.

I'm a fan of Hickory. Love it! I love it's STRONG variation! Yep. Variation is the word that can be used for Hickory. If you are going for "mid-tone" then it means the Hickory is stained. No problem. That's fine. Hickory takes a stain very nicely. But it will still have plenty of variation. The stain will even that out a little bit, but not entirely. The finish is UV cured urethane. I'm not very excited about that finish. If you are going for factory finish, you will want to work with the TOUGHEST finishes on the market (that's why you go with factory finished...for the TOUGH finish). The UV cured urethane is a ho-hum type of finish. Average would be the best way to describe it. The thickness of the plank is 3/4" = normal for sold. The plank width is 5" with random lengths UPTO 60" (5ft). That tells me there will be many planks in the 3' - 4' range. Again, this is ho-hum average. And with a wide plank product, it will need "glue assist". And Hickory certainly needs it because it has a bit more movement (less stable) than white oak. And then there is the "low gloss" format. The low-gloss finish on this depth of colour = nightmare to live with. It will show dust, etc as well as oily foot prints, sock prints, paw prints and will look hazy at certain times during the day. The "haze" is part of the chemical make up of the finish itself = that's how they take away the gloss...they haze it with a chemical additive. The haze goes away when you sand and refinish the floor. That's the only way to fix it. If you must have a mid-tone floor, I would recommend a TOUGHER finish (aluminum oxide or ceramic infused polyurethane) in a satin. Satin is FAR MORE livable. It offers a lovely glow without being shiny. It hides skin oils (like paw prints from dogs) because it is the same gloss level as skin oils....it isn't hazy....you get the idea.

Hi - curious what color you have. I’m trying to match my Silverado that was installed in 2014 but the colors aren’t working. We want to replace travertine that’s in the entry. I did hear they are discontinuing this line so it may not be available for much longer.

I don't think the hardwood from today is nearly as good as the hardwood from even a few decades ago. I have small dogs - both less than 20 pounds. But they're young, like to play, and they've left some pretty amazing scratches and skitter marks in the hardwood - in 2 different homes. Yes I keep their nails trimmed, they get a quick dremel every week. The old floors were site finished oak hardwoods. And there were spots where the scratches were getting pretty bad. The one house in question is in a beach town, so between the dogs and the sand, the floors were very scratched up. I deliberately chose a wood look LVP and it's held up incredibly well, but no one will mistake it for site finished hardwood either. I have engineered wood in my primary home - and while they've scratched that up too, it's somewhat less noticeable because it's a matte finish, and it's pre-finished engineered, which I've heard may be somewhat harder.