Hope this helps. If not, you can try booting from the CD and reinstalling Windows. It will overwrite and repair and may fix the problem. Good luck. Here is the solution to the logon - logoff issue in Windows XP. Enter the Recovery Console Boot the system using the Windows XP CD-ROM. In the first screen when the Setup begins, read the instructions press "R" (in the first screen) enter the Recovery Console. Type-in the built-in Administrator password to enter the Console. You'll see the prompt reading C:\Windows (Or any other drive-letter where you've installed XP) Type the following command and press Enter. CD SYSTEM32 (If that does not work, try CHDIR SYSTEM32) COPY USERINIT.EXE WSAUPDATER.EXE Quit Recovery Console by typing EXIT and restart Windows. You'll be able to login successfully as you've created the wsaupdater.exe file (now, a copy of userinit.exe) Now, change the USERINIT value in the registry (see Phase II in this page) and change it accordingly. If it is, or was Blazefind you removed, there is a removal tool here http://securityresponse.symantec.com/avcenter/venc/data/adware.blazefind.html Good luck

I agree with Wildchild, what CAN you do in life without knowing the basics? Think back to first grade, in order to print your name you had to know the basics of the letters... she could write it from the standpoint of the most basic, such as i noted above to the most complicated, say a brain surgeon where you'd have to know the basics of how the brain works but that wouldn't be nearly enough information to do the job. Suzan J

d_gw, DD has gmail account. I've tried to "share" to both Yahoo and Gmail accounts. Both rejected it. In my original message, I copied and pasted the rejection language. Friend is on vacation and probably not checking email. She is much less "connected" than most people. diane_nj, the way the software is set up, it cannot be printed, nor can it be saved as a .pdf file. With new grandchildren, I'll be making plenty of photobooks. I've been making photobooks using My Publisher since 2011. I haven't made scads, but I've made enough and made them often enough to be familiar and comfortable with the software. I've used Blurb before but found it more difficult to navigate. If I cannot get this problem resolved, I'm going to have to change to a different company.

On the back of the bag of the turf builder, it said to do it once a week for 4 weeks. And it shows what the grass should be doing in each week. I got to application 3 and everything was fine. I stopped it there because then the heat came and turned everything yellow. In the picture, i applied turf builder to that area. It was great until it turned 90 and above for the weekend and it all turned yellow except for that one really green edge. I applied it there because the rest of that grass belongs to my neighbor. The watering schedule is sun, tues, and thursday at 6am for 10 minutes. The sprinklers are set up to cover the whole area that is my yard in the frpnt and back, so I can get an inch of water with those in 10 minutes. According to the landscaping company. But that just started this past sunday. A month ago i would do a spray with the hose every other day. I dont know how much i watered, but i would skip a few days after a rainy day. Maybe I watered too much. (-.-) The HOA landscapers are not optional for my neighborhood sadly. So i cannot control the mowing aspect of my lawn care, but I can control the water system and everything else.