I got one from Farm-Tek as a free gift for buying some plastic. It holds about 3 quarts, has a spray nozzle that can be adjusted from a stream to a mist and a release valve. One of the best freebies I've ever received! Mike

Height of the rainshower head? I'd bring it down no lower than about 12" above the height of the tallest user. It can be a bit lower, but try to stay at least 8" above the top of the tallest user's head. Depending on the style of head you're using, 18" to 24" extension will work fine. Most true rainshower heads will not perform well unless they are installed parallel to the floor. So installing them on an angle, as they might be when coming out of a wall? You'll get some "rain" and some "dribble". There are hybrid rainshower heads that are designed to replace a standard head coming out of a wall, but they're not true rainshower heads. They usually have fewer holes to give a more forceful spray. They are "in between" heads. I've not heard of cleaning problems with metal hoses. I suppose hard water could bring that into play. I do recommend getting a hose long enough so that you can use the head to wash down all surfaces in the shower. You can also get additional head hanging brackets, they're only a few dollars each, so you can mount a bracket to hold the head at knee height for shaving legs, etc. Metal versus plastic? Some metal heads are cheesey, some plastic heads are fabulous. I've showered in all types of settings, from razor sprays that are painful to the gentlest of rainshowers. From one shower head to full-blown 24 head spa setups that make you feel like you're in a car wash. When I built my own shower, there were no limitations. My wife had carte blanche, we had no budget. All we did was we put in two heads on two valves. A 12" overhead rainshower, it was about $100 for the head. On the wall I installed a Grohe Top4 Relaxa head on a vertical wall bracket. I'm 6'4", my wife is 5'1". The head is easy to slide up and down as required. It can also be taken off the clip to be used as a hand held. I installed another bracket lower on the wall for my wife to use when shaving her legs. She can sit on a teak bench and clip the Top4 head into that bracket while she does that. I have two separate on/off supply valves, one for the overhad and one for the handheld. They can be run independently or simultaneously. They are simple valves, Temptrol. It's an excellent valve that will never cause problems. $100 for the rainhead, I think it was around $175-$200 for the entire Grohe setup, the Top4 head, the bar, the extra long hose, etc, about $200 for the two Temptrol valves. $500 for the whole shebang. No regrets. In a tub/shower combo, a rainshower head could be brought to the ceiling. There are plumbing kits that have chromed or other finish tubing that can be surface mounted on the wall to bring the water to an overhead rainhead. But mounting a rainshower head on a typical angled arm coming out of the wall? You might not get good water flow out of that. I have installed in-the-wall plumbing so that a rainshower head could come out of the ceiling in a standard tub/shower surround. The setups have had the standard wall tub filler and wall shower valve setup, I've usually installed a diverter valve so the water could come out of the wall shower head or the overhead rainshower head. Nothing ghastly about that at all. I would not have just a rainshower head as your only head. As other have mentioned, it's a very gentle flow of water, and does not do a good job of penetrating hair to rinse out shampoo. Mongo

Thanks everyone! Wellllll, ging9, we would probably do the same as you, but at the end where the bench will be is a window...of all things. It's kinda crazy but we want to keep it. It is not an exterior window now, but it once was. It now looks out over a stairwell and beyond that are windows that look out to the lake. You can literally be taking a shower and see the lake! I am concernced about the body sprays blasting all the way to the window, but hubby said he would figure that out. So, in my case, all controls would have to be on the same end. That's why I think the hand held spray on the pole is all I should probably get along with the body sprays cause I've never had them and can't resist. Everyone else agree? Thanks.

Hi dmosunich, I personally use this Waterpik hand-held shower head when the old shower head stopped functioning. It works for my needs. Not fancy by any means but definitely am happy with the multi-spray options that the old fixed shower head could not provide. The criteria for me was that the shower head had to be bigger and wider, and have the ability to detach and have a long enough hose to move freely. This Waterpik fit all of that plus it had multiple spray patterns which was definitely a plus. Can't speak for its durability as it is made of plastic with an exterior metal-like shell (most likely a type of acrylic that looks like metal) but I've had it for about 2 months now and so far so good. Hope this helps. Very Best, Tai Truong Elements of Design 3400 Medford Street Los Angeles, CA 90063 tai@lusivedecor.com www.elementsofdesign.com