Did I just kill my new electric power washer by getting it wet?

14 years ago

I picked up a new Karcher electric power washer on Craigslist. I used it for about an hour and it was working just fine. I was cleaning up some dirt and leaves on the ground and wasn't careful enough. The power washer got splattered with dirt. I rinsed it off but since then it won't work. I let it dry out for a few days in case that was the issue but it still won't work. I know people have problems with these little power washers. If it's my fault I certainly can't go back to the person who sold it to me for a refund. But if it seems like it should be able to tolerate being splattered then I will probably contact him. I still may not get a refund since he did test it ahead of time and it did work for an hour but I thought it might be worth a try.

Is there anything else I might be able to try to get it to work again?

Thanks for you help. Maybe next time I should pay full price and get a warranty. Lesson learned.

Featured Answer

PRO

Steven Laurin & Company

14 years ago

I've gotten my electric Karcher wet on numerous occasions within the past 12 years - clean the casing under pressure as well, and it's still ticking strongly. The on-off switch quit a few years ago, necessitating using the plug instead, but everything else is fine.

Seems as though the problem is electrical though - try testing for a short circuit.

Sort by:Oldest

Comments (8)

yungman
14 years ago
Did you check the ground fault detector on the power plug. Make sure the switch is reset.
rcmoser
14 years ago
Come you brought it used, it's your responsibility for the condition after all thats why you didn't want to give full price. SO IMO the seller NOT at fault especially after you used it an hour and then happy-hazzardly sprayed it. And NO IMO an electrically device won't take being sprayed by high pressure water without an ground fault or reset to protect the operator and the equipment.

I would think as yungman suggested they is probably a reset button some where. If you get it reset this would be an wakeup to keep the unit away from the spray.
Related Discussions
Did I just kill my Ming aralia?
Q
Comments (13)
If your plant was healthy when you repotted, it will have plenty of energy (especially at this time of the year) to push a new flush of growth, You have the right idea .... keep it barely moist & in the shade (outdoors if possible) and wait. It's probably transplant shock, possibly made worse if you didn't take pains to keep the fine roots wet while you worked on them. Sunburn (photo-oxidation) is unlikely if you're only concerned about the amount of time in the sun during the repot, but if you're looking for symptoms - leaves turn silver or whitish - never red. The sun releases a free O- radical (the same one that is so loosely attached in hydrogen peroxide) which bleaches (oxidizes) the pigments in the leaf so they turn silver/white. It can't turn leaves red. Al
...See More
Have I just killed my roses?
Q
Comments (8)
Thanks, Mike. I was wondering about the calcium and I SWEAR was going to ask about that before I put the lime down. I'll get another soil test this Spring before I do ANYTHING else, I promise. Nothing is fully leafed out. There are lots of leaf buds swelling, and a few tiny leaves, but we've had a very mild fall-early winter with only a few COLD (upper teens) days so far. Our sustained coldest weather will be from now until mid-late February. The next week is projected to be upper 20s-low 30s which is about normal. It's quite normal to have this amount of growth at this time and it always gets killed in the next month or two. It gets pruned off with Spring pruning. Glad to hear about the low toxicity and ease of leaching. Morz8, thanks for your input. We're supposed to get some rain tomorrow and this coming week. If not, I'll start watering. Thanks again, guys, Barbara
...See More
Did I kill my Lavender or is it just a late bloomer?
Q
Comments (12)
It's telling that big scale Lavender growers use mounded rows to keep their plants in sharp drainage. I have amended clay but it takes years for it to be unlike is natural self...too dense for roots and too water retentive. Some plants adapt and now I know others never will. Lavender is in the latter category. If you don't mind the look you could make little mounds of fast draining soil (without your clay included)over the gravel amended holes already suggested. That's a double duty drainage/aeration situation might allow you to grow Lavendar in the shorter term. I've got Hidecote in pots as I can't stand losing any more Lavender. I even amended the potting soil with some pea gravel and "soil conditioner" so the peat in potting soil didn't collapse and replicate bad drainage of ground soil. I've got second year Lady Lavender plants I grew from seed that I need to separate from holding pots and spread around in only raised bed I know has sufficient drainage. Rest will go in pots and get placed among other plants. I don't know why so many of us want to grow Lavender when we don't have the conditions for it but it's a great pollinator attractor and it's pretty! Just gotta do what they need to survive.
...See More
Power washer to clean high up on my house?
Q
Comments (7)
I just bought the 18ft one from Northern Tool. Its a nice wand and I purchased the gutter cleaning attachment. I'm going to use it for the first time this weekend. Either way, I think you will need something a bit more powerful than the electric unit you have now. Something with at least 2500 psi should work. I bought a Ridgid 3000psi machine for 399 at home depot. It has a subaru robin engine that it the easiest engine to start and is not that loud. Also this was comes with AR brass head pump. While its not a top of the line Cat pump, its a good axial cam pump that should last a long time. I really like my pw. I noticed lowes a similiar machine with a briggs engine same psi for 389. I know HD and lowes have pw with less psi for less $$.
...See More
rcmoser
14 years ago
I would never spray anything electrical wet with juice going through it. But, I don't like shock treatment. why wouldn't you fix a 2 dollar switch?
yungman
14 years ago
I am pretty sure you have a ground fault switch on the plug. There is no way to avoid getting that thing dry in the mid of using. I wet it so many times. I sure hope mine would take a dive like this so I can have the excuse to buy a new one!!! The electric ones are just pissy!!! No power at all. After I spent hours cleaning bricks and concrete, I finally told my wife I refuse to use that anymore!!! Want me to clean, she has to buy me a real washer!!!

If it really crap out, let that be the message from the universe that you need a better one, it's better for your health!!!!

It sounds like I am joking, but I am really not. My wife don't want to spend money on a new one and I am stuck with this!!!! It actually hurt my neck because I have to spent hours stairing at the floor waiting for it to be clean!!!! I hate that electric washer.
PRO
Steven Laurin & Company
14 years ago
rcmoser -
Of course I realize it's an electrical device - "with juice going through it". However, think about it for a second - it's a sealed unit and designed to take an occasional spray. A low pressure, fan spray - directed only on the outer casing - shouldn't cause any harm to the internal electrical components.

I keep it in my dockbox at the marina - used mainly for washing my sailboat's exterior surfaces when in home-port. The unit is perfect for removing salt + grime from fiberglass and rigging, using a jet-spray on stubborn areas - occasional fan spray for the teak decks.

A gas-engine unit is certainly more powerful, as yungman implied, but would be inappropriate and inconsiderate to my dockmates. I use a higher-pressure gas unit at the house.

Someday, I'll get around to replacing that $2 switch. :-)
lbpod
14 years ago
High quality electric power washers are available, but
pricey and most of the 120 volt models require a
20 amp circuit.
equinox_grow
14 years ago
My Campbell Hausfield(Hope I spelled that right) hasnt had a problem with that on the occasion I do that on accident. My only problem is that the threads for the inlet hose arent in good shape so I rigged it so you dont have to remove the hose from there. Redneck engineering at its finest. But it works.

Did I just kill my new electric power washer by getting it wet?

Steven Laurin & Company

Comments (8)

yungman

rcmoser

Related Discussions

rcmoser

yungman

Steven Laurin & Company

lbpod

equinox_grow

COMPANY

BUSINESS SERVICES

GET HELP

CONNECT WITH US