Choosing the right flooring type isn't enough for your living condition. You will have to consider the types of cut: flat sawn, rift and quarter sawn, quarter sawn or live sawn. Quarter sawn and rift & quarter sawn will be best choices, because expansion and contraction is along the thickness of the wood. You will need climate control all year round. 70 degrees at 40 % relative humidity is where you want to be throughout the year. The use of a humidifier/dehumidifier will be needed year round. Although, engineered flooring is more stable than solid. Using the wrong wood specie in your living condition can run the risk of de-laminating with engineered wood. If, the top veneer is more or less stable than it's core and backing. You will experience de-laminating in extreme humidity swings. Take in account of what the engineered flooring is constructed of: mdf or plywood. The width of the flooring will account for how much expansion and contracting also. 2 1/4" strips are the most stable. As you go wider, expect to see more wider seasonal gaps. Proper acclimating is critical, should be performed with a moisture meter. For 2 1/4" strip flooring , sub-floor and flooring moisture should be within 4%. For all other widths 2% moisture differentiation is allowed or should not be exceeded. Don't forget proper expansion gaps, which is the thickness of your flooring, example: 3/4" thick = 3/4" gap. Sub-floor type and condition will affect the performance of wood floors. All this needs to be considered for the proper and successful performance of your wood floors.

Definitely choose wood. Vinyls are great, however, for resale value, wood is the absolute best ROI especially for the main living areas. You can choose an engineered or solid- whichever makes most sense. We are able to provide engineered HW that can be sanded and refinished just as many times as solid. If the wear and tear is something you are worried about, consider choose a floor that has a reclaimed look with a strong grain pattern and saw markings that can hide many of the scratches and discrepancies that will happen over time. If that specific design isn't your style, consider a light color floor. Oiled floors are a decent choice because fixing superficial scratches are relatively easy. Oaks are good because of their graining and if kept a light color- will be able to disguise many of the scratches. You can ALWAYS sand and refinish your floors a few years down the line if needed. Plus, when you go to sell and the floors have been lived on- they can be sanded and finished for the new buyer. A vinyl floor will need to be replaced. Hardwood is more expensive at the moment, but they actually end up paying for themselves years down the line with the proper care and maintenance. Or you can choose wood in the dining and great room and a tile in the kitchen. SJ McCarthy has a good recommendation for hickory and oak. Another option is Character Maple(make sure it is hard maple). If you really want to be bold- go for Brazilian Pecan. :)

I'm a fan of Hickory. Love it! I love it's STRONG variation! Yep. Variation is the word that can be used for Hickory. If you are going for "mid-tone" then it means the Hickory is stained. No problem. That's fine. Hickory takes a stain very nicely. But it will still have plenty of variation. The stain will even that out a little bit, but not entirely. The finish is UV cured urethane. I'm not very excited about that finish. If you are going for factory finish, you will want to work with the TOUGHEST finishes on the market (that's why you go with factory finished...for the TOUGH finish). The UV cured urethane is a ho-hum type of finish. Average would be the best way to describe it. The thickness of the plank is 3/4" = normal for sold. The plank width is 5" with random lengths UPTO 60" (5ft). That tells me there will be many planks in the 3' - 4' range. Again, this is ho-hum average. And with a wide plank product, it will need "glue assist". And Hickory certainly needs it because it has a bit more movement (less stable) than white oak. And then there is the "low gloss" format. The low-gloss finish on this depth of colour = nightmare to live with. It will show dust, etc as well as oily foot prints, sock prints, paw prints and will look hazy at certain times during the day. The "haze" is part of the chemical make up of the finish itself = that's how they take away the gloss...they haze it with a chemical additive. The haze goes away when you sand and refinish the floor. That's the only way to fix it. If you must have a mid-tone floor, I would recommend a TOUGHER finish (aluminum oxide or ceramic infused polyurethane) in a satin. Satin is FAR MORE livable. It offers a lovely glow without being shiny. It hides skin oils (like paw prints from dogs) because it is the same gloss level as skin oils....it isn't hazy....you get the idea.

Vinyl does NOT like heat or direct sunlight. Most vinyl products have a maximum heat tolerance of 85F. That 'sounds' fine until you realize that a pool of sunlight on a floor can reach 120F inside of 20 minutes! Ooops. Which means you need to assess your home as a WHOLE. Old windows or windows that have very little UV protection on them will give you plenty of trouble when looking at the average vinyl product (today's low-E windows start with a UV protection of 45% and then move to 75% and then to 90% or higher). It sounds like you have a low-impact household and a nice home (depending where you live...my market offers bachelor apartments for your price range). A wood product would certainly offer a beautiful floor with plenty of livability and plenty of return on investment. With a budget starting at $7/sf (and moving higher would be preferable) you can have a midrange quality engineered hardwood and a lovely underlay (like 1/4" cork) that will give your new hardwood floors a lovely solid feel to them. Oh yah....vinyl does NOT like underpad. It needs to go STRAIGHT DOWN on to the subfloor. And if the subfloor isn't PERFECT you can have problems.