So let's talk the about the difference between an engineered hardwood and a vinyl plank. And there are more than just the difference between the two flooring options. There are many differences within each type of flooring. For example: engineered hardwood flooring can come in different thickness overall and vinyl planks can come in different plank styles (glue down, WPC and SPC). Let's break this down for you guys a little further. Engineered hardwood is an incredible option for an authentic with longevity in mind. Typically is worth less than it's hardwood counterpart (hardwood) but in some instances, depending on the wood species, a high end engineered hardwood veneer could be worth more than a low grade hardwood such as your North American (domestic) species. Engineered hardwood is more often on the 7/16" side of thickness and that is your more price friendly thickness. You can special order a thicker 3/4" board, but that will come at a heftier price because it's added layers. The added layers create a more stable plank that expands and contracts at a lower rate than it's 7/16" counterpart. Engineered hardwoods always should and for the most part come prefinished with an aluminum oxide coat. This very coat is your barrier against everyday beatings from walking traffic and dropped items. This coat is very tough but no floor or finish is indestructible. You will have dents and scratches pop up over the years. Depending on the company, you can buy "refinish kits". Although, technically you cannot refinish aluminum oxide, the kits just help you hide the scratches until you decide to do a professional refinish to your floor. Lastly, let's talk about refinishing your hardwood floor. Please have a professional do it! And it is very expensive to do this job. Depending on your floor size it can cost well over $3,000 USD. At this rate, you are in the market for a high level LVP. Which brings me into the luxury vinyl plank spectrum. As you all are aware, LVP's are dominating the flooring market and they should be. They do a very, VERY good job at imitating a hardwood or stone surface and multiply the longevity all the while. Vinyl has come a long way in the last couple of decades let alone the last few years as far as planks are concerned. There are plenty of options and so, so many different brands all wanting you business. Luxury vinyl planks can be divided into two different categories in the market right now: glue down or floating. The first generation of vinyl planks are your glue downs. They are still very popular and serve as one of the friendliest DIY repair floors. You simply heat the old damaged plank, peel it and put a new one down. The floating aspect of planks gets a little more complicated as you can have a WPC (wood polymer composite), SPC (stone polymer composite) or a loose lay style. And you can look those up to see the complete difference in each to see what's your most needed. I'll lightly go over each to explain what they are. While all three styles are virtually waterproof, you really can't go wrong with any and will have a good product in each one. WPC's are a click based plank which does not require an underlayment, hence being labeled a "floating" floor. The foaming agent in the core of the plank helps with sound absorption and makes the plank a little more friendly to stand on. It's a thicker overall plank and you should think about how the trims will be affected. SPC's are a click based plank which also does not require an underlayment which helps reduce the installation cost. The core is limestone based and makes it very rigid and tough. It's extremely dent resistant but for the most part is lower in wear layer for some reason. You can however find plenty of SPC's with a higher wear layer, nearing 28-30 mil, but it will cost you more because you will have a high dent and scratch resistance. And finally you have your loose lay planks which are the ultimate form (as of now) in easy maintenance and installation. They do not require an underlayment, do not use a click system and don't need any adhesive (although some installers recommend gluing the perimeter). They have a friction backing which let you lay the plank adhesive free without any movement on its end. The plank itself is waterproof and pretty dent resistant. While engineered hardwood does cost more and is less maintenance friendly, it does add value to your home with the hardwood veneer. The ability to refinish gives you a long floor life but the cost of a refinish is a setback in itself. Luxury vinyl planks are a low cost and long lasting floor option but adds little to no value to your home. The endless options of styles and colors gives you endless customization to your home at a far less price. Either option can last a while but at this time vinyl planks are a better option for any household with multiple members, both human and furry alike. I hope this little bit of information helps in the short and long run. Just a flooring dude.

I had always loved hardwood floors and wouldn't consider anything else... Until we bought our current house. It has LVP (Coretec Plus) that visually is pretty good at fooling people into thinking it's real wood. When you walk on it, you can tell it's not because it doesn't have the echo of wood. But it also doesn't have the hollow sound that I remember Pergo-type floors having. Since we have an open floor plan, it is actually nice that is is a quieter flooring. We found a box with a few extra pieces of the flooring in the garage, and decided to test how hard it was to scratch/damage. Hubby dropped an ax on it, no marks. Then he "chopped" it with varying degrees of strength and it really took a solid blow to do damage. He also took a screwdriver to it, dragging the tip of the tool across the "grain" of the LVP (the grain is raised) to see how much pressure it took to create a visible mark, and again, it took significant force to make a mark that was noticeable. And with all of the marks that were eventually made, they all maintained the same color under the damage, so they weren't terribly noticeable until we held the plank up in the sunlight at the right angle. So I'm not pretty happy with the flooring, especially since we live in a mountain climate (snowy, muddy) and have large dogs. I think it will hold up very well. I have no experience with other brands though.

Thought I would also update this thread since it popped back up. We moved into our new build 2 months ago and ended up choosing engineered wood for most of the house, except the mudroom, laundry room and their connecting long back hallway, which got tile. I can close this area off and the dogs stay here if we are gone for several hours. Their food and water is also kept in the laundry room. The floors are Duchateau - Riverstone collection - Sava color. So far they have not shown any scratches from the dogs making the crazy run to the front door when they hear the doorbell and/or fedex! The floors have a rustic look and slight texture that will make it easier to hide any scratches and dents.

Installing hardwood in Florida takes extra effort. The first part of that effort is having EXCELLENT humidity control in the home. In hot, humid climates that means the A/C might not be enough. It might require an additional whole-home dehumidifier. It can also rule out an 'open window' type of home. Again, it depends on the location and the humidity levels. Hardwoods must be kept in a 'happy humidity' range between 45% - 60%. At all times. Every minute of every day. For ever and ever. And ever and ever. That means you will spend more on your HVAC system to have that type of 'push button' control (whole home humidifier/dehumidifier). And then the type of build also dictates the best practice for installation of hardwoods. A concrete slab takes extra effort to glue down wood. A high-end adhesives must be used and those add $2-$3/sf...just for the glue. The hardwood and labour are on top of that. In Florida, the most appropriate floors are stone, tile, terrazzo or concrete. All of which are hard and cold. Of course a cool floor in a hot climate is a BENEFIT...not a drawback. Part of the cold flooring is it helps keep the house feeling cool. Vinyl is then the next option. The difference between the 'wood look' or the stone/tile look is simply aesthetics. If you LIKE the look of wood, then go for it. If you LIKE the look of stone/tile, then go for it. With vinyl you will require very good UV block on your windows. Ask your builder what level you have on your windows right now. You will want to find something with UV block ABOVE 50%. I prefer to see 70% - 75%. That keeps the vinyl and the house cool. But it also makes growing indoor plants a difficulty. Plants struggle with UV blocking windows at 70% or higher.