Hi guys! Thanks so much for the compliments. Bill was here today putting the final touches on everything (we're so excited!!) and he told me there were questions on this thread. Sorry I didn't respond earlier. I think Bill answered most everything, except the wood counter question. It's holding up great! Looks brand new. Of course it's only a couple months old, so I'm not sure what that's worth :) I just have to finish the window curtain and apply grout colorant to the floor tile grout (which was stained before we even used the bathroom by all-natural cleaner, grrr....) and then I think we can officially call it completed.

This old thread got revisited. @dani_m08 to answer the question about extra probe, I believe I ordered an extra one when I bought the set up. The probe wire is just setting in the junction box I think but honestly I cant remember. When I laid out the underfloor heating and the probe, I just ran another probe near the first probe, and it was then sealed into the floor self leveling compound as per instructions. then the end was just threaded into the wall like the one that would be live, and not connected, but just laying there in the box. Regarding the tile layout. I just decided to run it this way, after getting instructions on the 90Degree way, IIRC. The herringbone that I love is from my childhood and the side walks in my neighborhood that all ran at 45Degree. so that to me is herringbone. I know you posted on @sochi thread about her amazing bathroom and a wall mounted faucet. I would totally do it if I had the right sink for it. In my case I had made my sink out of soapstone and an integrated backsplash. The pictures of this bathroom reveal are no longer available because of the use of photo bucket, when it was Gardenweb. I did not keep my account with photo bucket. I'll add some of the reveal pictures so you can see the sink and floor. Regarding the sink there is no ledge for water to drip from my hands when using the faucet. The water drips right into the sink. In my other bathroom with a deck mounted faucet I am always wiping up drips and it is a nuisance. I much prefer the setup for this sink. Below: I love the flush finish from the faucet to the bottom of the sink. nothing drips on a counter or edge of a sink. Below: looking in from the doorway. Below: Here I am finishing up the sink. the backsplash was epoxied on as a separate piece. The whole soapstone install in the room took next to nothing to buy as they were all small pieces that I epoxied together with a 3 part stone epoxy. Below: this is the counter at the tub, and is in 2 long pieces but I was able to epoxy them together at there edges to make a wide slab for the top. All the soapstone was finished with a 60 grit sandpaper to be rough and this lovely soft tone of blue/green/gray/white. I did not oil it so this color tone would remain light. Below: If I recall correctly @sochi helped me decide on this Hubberton Forge Mirror. I have 3 different metals in this room, but they are all a cool silver to black color. Below: the center of this tower shares space with the kitchen on the other side of the wall. there is also some extra space that houses some electrical wiring. this is an old simple house. this bathroom was an add on when it got move to the farm in the 30s IIRC. The plumbing was all rearrange and some of the details that were orignially there I kept but updated it, such as this tower feature. The old one went and the carpenter did a wonderful job with this one. Below: This feature was another thing I kept from the old bathroom but flipped it from the other end and had the carpenter put drawers in it. Before it was a hell hole. things got lost and the build was soooo old and creapy I didn't like using it for storage. Now it is perfect for storage.

I AM SPEECHLESS!!!!! Ditto everything everything everyone else said! I am in awe. I am a left brained design clod, but I do recognize genius. I am stuggling to dwsign 5 bathrooms and a kitchen with only two weeks to prepare for our newly constructed home in Irvine. Our two bedroom filled with mold was torn down to the concrete slab and has gone up faster than I expected. Any tips, help, suggestions, this peon will fall to her knees. I really know nothing about gardenweb protocol as I just joined and you are my first message. I am overwhelmed and don't want to go to a tile design showroom where I get the most recent 'in' Tuscan look ir white carrera marble design. How do you come you with such great ideas. I have sat in Barnes and NOble and looked through magazines...lthe saddest part is I'm married to a contractor and his design sense is more outdated than mine! We both just stared at yours and said...ooohhh.......aaaaaaahhhhhhhhhhhh!

This is a shared wall with another bathroom that has a recessed medicine cabinet that is 24” wide (in the exact spot where my mirror needs to be). Recessed of course fits between studs. And the framing in the wall may have been altered for it to fit. What you need to know is the stud distance center to center. Or the exact size of the cavity between the studs. Because what is billed as a 24" medicine cabinet may be sized to fit in the recess between 24" OC framing. The actual space between the studs would be approximately 22.5" If that is the case, then a 24" surface mount medicine cabinet would work. Signature Hardware Trossman 24" x 36" Framed 1 Door Medicine Cabinet But they lucked out with getting a recessed medicine cabinet! Yes, they did. But you can have a surface mount medicine cabinet which would be very much in tune with your old house. Two of my vintage ones: If all else failed, I would make a custom vintage style one. Would need to keep in mind how far the sconces project light from the wall & possibly add mounting blocks behind them to get them farther away from the wall.