buzzyng - I started looking tinto zwave as well, and jumped ship for this project. I am backing my entire system with an HAI panel and integrating these switches - along with all of my other sensors - doors, windows, etc. I am probably then going to throw in some zigbee locks. I am going to look to use haikuhelper or even the Ube app itself to put everything together. With Ube being so new, I figured it will take some effort. As I said in my old post from the Electronic boards, I had a chance to talk to Utz, the Ube CEO and talk about their goals and pick his brain. They have a much larger picture in mind than just these switches - he actually offered to call me after I had a bunch of questions for him via KickStarter.

Finding a ductless split that doesnÂt use wireless infrared communication with a remote stat or DDC type communication with a wall stat, is just about impossible. The major reason for this is most are manufactured or was at least designed overseas, thus the technology. I can think of one company, EMI by ECR Int. with some US roots, located in central NY that has AC/HP wall units that can still use a remote wired wall stat that should give you the contacts/points to control operation with a main control interface. Here is a link that might be useful: EMI

In our latest build, I concentrated on: 1. Wiring, for now and the future. Upgraded as far as we could go-CAT6 (alas, residential fiber not yet affordable, 2 years ago) and made sure that we planned for things we wanted as well as what, perhaps, a future buyer might want. We are with Google Fiber, currently, but all fiber networks can work with this wiring. We'd lived through the "intercom" stage (early 80s) and wanted nothing like that. Control panels swerve all systems, are out of the way and except for an additional alarm system panel (panic room? :) ), none is in the master, nor is any of it visible. The whole house could be run by apps, for those who have the appetite for apps. I don't... Most importantly, we did the planning before the walls went in. 2. Concentrated on not putting in anything that might become obsolete, fast. At one point, our low voltage guy recommended a built-in iPad, to run the house. Lol- NO! 3. Put 240V in the car area. Electric cars are becoming more and more something people want, and are common in my city. HAH! We decided to test the technology, soon after move-in. Got an EV. Our public utility paid for half the costs of the station/install. We're having a blast with the car, and Federal credits made it stupidly affordable. Now- the Utility told us that if we sell too soon OR go solar, they "might" ask for their money back. Understandable because... 4. Made sure that solar is a reasonable option, without tearing our house apart. Go back to #1- it all matters, works. We're have a great rating for solar (because of design) and can easily do it. Didn't do it with the initial build, because that technology is rapidly changing. 5. Nest Thermostats- we have them. Took a minute for me to understand the programming, but it works great. 6. Made sure that our HVAC system had the best, cleanest and easiest to operate technology available. Without an app, it works with our windows, even, to prevent the "fogging" that happens when it's 100 degrees outside and 72 inside. Also works to control humidity in our really humid climate. 6. Not what you'd think of as "technology", but we have a very natural possibility of a third story rooftop deck. We don't want it (I HATE holes in roofs- problems abound, even in the best of cases), but somebody else might. So while the walls were open, we took the time to have a tiny bit of engineering, a bit of steel reinforcement installed, and presto! That space is ready to go, for anybody who wants to do it. All of this was done at really affordable prices, since it was planned for, installed in the beginning. All of it wrapped up in a really nice, long-term Builder's Warranty. Not nearly as affordable if you don't do it and then discover you want "more". That, then, becomes a type of a remodel remodel- hell on earth, for me! The only thing we installed that could become obsolete are ceiling speakers. We love music, and it plays through our home a lot. Can hook to the TV, so a football game (or movie) sounds like a home theater, without all the mess. Eh- the speakers could become out-of-date, but they're there, so a quick switch out and off you go.

You only need the subscription for IFTTT. You still get most of the features for free. If you do want to use IFTTT you can pay $10 a year which isn't all that bad considering you get support, etc.