I'm here in the Finger Lakes Region of NYS and am getting ready for my first HFGH (10x12)spring. Have an LP heater in and have just received my shipment of bubble wrap from Charley's. My plan was to put the bubble wrap up in a horizontal plane beginning at the left of the door frame and go all around the inside of the greenhouse to the right door frame. I have my shelving hanging off of the wall studs so I thought that this would be easier and neater. The other option is to put it up in the vertical plane. I have the hangers from Charley's, but for the life of me, I cannot make sense of the corner hangers for this bubble wrap. Any ideas, comments and/or pictures of bubble wrap installation would be appreciated. Thanks in advance. Joe Here is a link that might be useful: My HFGH ready for spring

It sure must be nice to have such talented friends jejvtr. It looks like he/she gave you a lot of useful storage space and it's really beautiful too. I almost thought about doing one section like your closed doors for my desk. That way I can just shove it all in there an close the doors before company comes. I wouldn't mind having some shelves for cookbooks or the homeschool books that end up in the kitchen.

My apologies, Millworkman. I didn't know how things work here. Thanks for the posting advice. Unfortunately, I don't have pictures. These are not full replacement vinyl windows. The casings, etc, are wood. But the contractor wrapped the exterior faces at the tops and sides in vinyl sheeting. At the top of the windows and doors, there was (and are on what is remaining) crown moulding. This was sheared off so that the sheeting would go over the wood frames flat. I hope I explained this properly. The suggestion you gave for the window tops was really good. I thought I could add decorative pieces to the sides of each window as well - nailing thru the vinyl sheet to the wood? Or, would this attract moisture problems. Thanks, again.

I prefer the edge on top. It'a a more natural way to pull. How thick is the face of the cabinet going to be? Any pics of the door and a sketch of our idea?