This is a typical casement latch available from most hdw stores, however, in brass or bronze you may need to frequent a specialty supplier;http://www.lowes.com/pd_252990-76018-U+9935-L_4294711095__?productId=3407900&Ns=p_product_qty_sales_dollar:1&pl=1&currentURL=%3FNs%3Dp_product_qty_sales_dollar%7C1&facetInfo=

This thread is super old brought up by a scammer but.. There's a product called dip it that puts a heavy rubber coating on tool handles or whatever you need to cover. It comes in a spray in formula too. Comes in clear and colors. https://www.amazon.com/gp/aw/d/B000LNN11G/ref=mp_s_a_1_8?ie=UTF8&qid=1490885396&sr=8-8&pi=AC_SX236_SY340_FMwebp_QL65&keywords=tool%2Bhandle%2Bdip&th=1&psc=1

Thank you all for your help! You're correct that the doors are fiberglass. I called our salesman at Ganahl this morning and he said we can't do multipoint locks on these doors and there was some other option that we would have had to select at the time of purchase but can't be added now. Wish I had researched this better and/or asked better questions at the time we ordered the doors, since they are now non-returnable. Hopefully it works out. I bought the keyed door lever and deadbolt (single cylinder - see below) for the active door and two dummy door handles for the passive door. Re double cylinder, the Ganahl salesman said the downside of that, aside from inconvenience, is that in the event of a fire or other emergency, it slows down your ability to exit the house quickly. If someone is determined to break into the house, the double cylinder may create an extra step but they'll find another way in. And P.S. I do live in a warm and safe area, although it's an El Niño year, so good luck to us and our new doors! Thank you all again!!

The sample pic shows a custom cabinet - grain matching is usually not done by anyone other than custom shops. A custom shop should also be able to provide those cut outs for you. Custom - just by the nature of what that word means, will cost more than semi-custom or stock. Are you looking for high-end? Or trying to keep under a certain amount?