Enduring, really like your setup! My new (1983) house is sort of a contemporary-ish, transitional eclectic something or another. I found a great deal on Hansgrohe lever sink faucets and want something that will jive. There is a Hansgrohe model similar to your tub filler but with levers that I need to stare at some more. Boy IâÂÂm a dingbat; once I used your key words âÂÂTub Fillerâ I got all kinds of hits. Just a little flip of the wordage and Presto! The good news is there are a lot more choices out there than I thought (although not huge). The bad news is that I have never heard of most of the brands. For example: La Torre has some real nice looking stuff at a reasonable price. The few reviews were all good on the product itself but bad that it doesnâÂÂt come with some sort of rough-in valve thingy that is hard to find (I guess). Next, I came across this wall mount Baril from the fantasy collection that I really like. But who has heard of Baril? Not me! ItâÂÂs only $380 and must be too good to be true. However, here is the site and IâÂÂm almost convinced to give it a try. Now that I have the right search terms my problem is finding something nice that is not so traditional or overly modern. When I do find something I like it has a name I have never heard of or itâÂÂs something wack from China. Here is a link that might be useful: Please look here and tell me what you think This post was edited by jterrilynn on Sun, Jul 13, 14 at 18:49

"I could also just get a pull-down faucet for the sink and aim it at the tub to fill it." You could - but you won't like it. The most one of those will fill is 2.2 gallons a minute - some less that that. Divide your tub's capacity by that and you're looking at 20 minutes to fill +/- Not good. beekeeper - I have one of these and have placed more than half a dozen in projects over the past few years. What you get for your money is a machined brass body that mounts in the ceiling or wall and a plated trim piece. The body is a substantial piece of hardware and chrome,brass, nickel plating costs $$$ too. Whether that's all worth 500 + bucks, is up to you. Like davidro says, it doesn't matter what the delivery system is, this is just an opening for hot water to come out of, albeit one with a bit of engineering. GD & Spanish - the splashing is very much dependent on the mounting height of the unit AND the tub selected AND the location of the water column inside the tub. Mine hardly splashes at all. The ones I have seen that splash only do so for a minute or so until their is enough of a pool in the tub to counteract it. Flat bottom tubs with tall ceilings are going to splash more than one from 7' into a sloped contact point in the tub. Besides , we're talking water in a bathroom, generally tiled so what's the big deal ??? It's not like the amount of splash is the same as taking a shower and leaving the door open. 2. While you are correct in that "the water cools off much more than it would from just a regular tub filler", it's not as if it cools off enough for anyone without a thermometer to tell a difference, and a very sensitive one at that! Sure the air cools the water more from a stream falling from 8 feet than one falling from two feet. But bath water that is 100 + degrees is not going to cool down to 90 deg. in the xtra 1-2 seconds it takes it to fall from the ceiling- get real. Additionally , that filler produces a very dense column of water (laminar) that has little to no air in it, so one might argue it will be hotter and less prone to heat loss than a "regular" filler that introduces room temp air into it's stream - thus cooling it off on it's way to the tub. So don't worry Spanish -your tub will still be plenty hot with that filler if you choose it. IT'S A NON -ISSUE people. I've already alluded to the real issue for lower tub temps - FILL TIME. That's directly related to the delivery system ( valve). If your valve and accompanying filler will only deliver 5 gallons a minute it's going to take a while to fill an 80 gallon tub, and there will be some heat loss. Select a valve that delivers 20 gallons a minute and you can be soaking quicker that most people can undress. Here is a link that might be useful: laminar valve body - see page 2

Did we have this discussion a few weeks back? Can you get another spout with threads that aren't recessed? If not, in my opinion it is much easier to do the job from the rear. You can leave some kind of acess panel which could come in handy. I tried messing with tiles once and it turns into a problem trying to mount replacement tiles on a backing that isn't secure. Also, there is a thicker teflon tape available. Could you try that with thread paste on top to see if that stops the leak?

Not a silly question. When you have water forcefully hitting the inclined side of the tub high enough up, though most of it will splash downwards, some of it goes sideways, and some of it -- counterintuitively -- splashes back upwards from where it strikes the side and you can actually have a small puddle start to form on the floor in this area from water spray bouncing up and escaping this way. It the water doesn't hit the side of the tub, but only the bottom of the tub, it doesn't bounce high enough to do this.