Has anyone used the performance fabric called Inside Out?
desireebruno
5 years ago
Featured Answer
Sort by:Oldest
Comments (15)
Related Discussions
Has anyone replaced sliding closet doors w/fabric?
Comments (4)amy, that is adorable. We had nasty old bifold doors in the laundry "niche" in our beach cottage bathroom. I took the doors off and pretty much did what Amy did. Used a shower-curtain tension rod and two shower curtains. In our case, the length was just right. I don't have a picture, but I used two plain white curtains with a black border because the bathroom is black, white, and pink. I tried to do the same thing for DD's tiny closet in her tiny room because opening the closet door took up floor space, but she didn't go for it. I think she was concerned that the monsters could get out of the closet if the door was removed....See MoreHas anyone used quilted fabric for cold weather window treatment?
Comments (11)I'm surprised, I didn't expect to get much response. I did look at that link to WindowQuilts, my3dogs, and it is what I remember seeing a long time ago when they were a little more popular. I don't think I want to install tracks. Thanks for the link, though. That helped me make the decision that I want to make something myself. Daisy what you are describing is exactly what I was thinking of doing! I hadn't got to the point of figuring out to use a second tension rod on the bottom yet, and I was still considering whether to roll them up during the day and tie with ribbon, or use cords in the back, etc. I think the idea of using two tension rods and just raising the bottom during the day to fold it over is a perfect one! I think I am following your directions ok, all except the idea of cutting the fabric 2 inches larger all the way around. I assume you have to add more than 2 inches to the inside measurement of your window in order to make rod pockets and is the 2 inches on top of that addition? And what about the two inches on the sides? Is that seam allowance or is the finished panel, larger than the window opening? ghostlyvision, I will certainly post photos if I can manage to make these. Thanks!...See MoreHas anyone in Houston used HD for their Corian installation?
Comments (4)Although I am in OH so I can't comment about HD out in TX, I purchased our Corian through HD. I was concerned about which fabricator they would use but when I found out who it was it turned out to be probably the best fabricator in our area. I was so relieved to hear that. There was no offer of signing off on the templating but when I requested to see the templating layout they emailed me pics that I could approve...or not. We have 2 L shaped sections of countertops so I know exactly what you are talking about regarding the directional graining. We chose Witch Hazel but in the end we decided to go with a mitered corner because I didn't want the graining to run front to back on the smaller section of the L's...hope that makes sense. Which color/pattern did you decide on?...See MoreHas anyone had their slab honed by the fabricator?
Comments (21)kim k: Our Calacatta (Gold) quartzite arrived at the stone yard polished, and DH and I wanted honed tops. To oldryder's point: all the lines, colors, drama, etc. will be more muted once you remove the polish, but that's actually what we wanted. Among the many other issues we had with our installation, the honing/leathering was likewise a disaster. Our fabricator gave us two samples to choose from: honed and leathered (they had plenty of our slab, so prepared samples for us). The leathered sample look very orange peel-y -- lots of small dimples. We opted for the honed, as it was the perfect amount of matte and smoothness. After the installation, I noticed the tops were very gritty, and the veins had a whitish appearance here and there that were not in the sample we received. When I asked the company for the honed sample to compare, it took them a week (or longer) to 'look for it' (to include their coming back to me and asking, "Are you sure our guys took it with us?") before admitting they lost it. At that point, I had no 'proof' to show what the end result was that we'd agreed upon. While they admitted I should end up with a smooth, non-gritty surface, they didn't know where to go from there. They had me contact a regional rep to inquire, and they had me post a query on on the Stone Fabricators Alliance forum (at which point the pros -- as helpful and understanding as they tried to be -- told me to tell my 'guy' to get off their butts and post the inquiry themselves...a customer shouldn't have to do this for a fabricator). We went back and forth for months. They finally agreed to use different brushes and try leathering the tops -- used a sample, and this time, the leathering didn't result in orange peel. I agreed to having them leather (or whatever they wanted to call it) on site. At this point, I can still see grinder 'arc' marks on the tops, but along with so many other issues with the installation, I just settled. Based only on my single experience, I would not recommend having a fabricator (unless old ryder was nearby!) hone the tops -- unless you can go back and point to an example of what the end product should be. Good luck!...See MoreLuisa Almodovar
3 years agoThe KEEPING ROOM
3 years agolast modified: 3 years agoRebecca Price
2 years agoelcieg
2 years agoRebecca Price
2 years agoRachel Brown
last yearJohn Saldivar
last yearharrisondebi
3 months agoNancy Brown
25 days ago
Related Stories
DECORATING GUIDESPerformance Fabrics Are Changing the Way People Design and Live
An interior designer talks about why performance textiles have become a game changer inside the home
Full StoryKITCHEN CABINETSHouzz Call: Have You Found a New Use for Old Cabinets?
Reusing cabinets can feel oh so satisfying. We’d love to see the ways you’ve repurposed them at home
Full StoryHOUSEKEEPINGHow to Clean Your Fridge, Inside and Out
Keep your refrigerator clean and fresh, while you gain storage space and lose those ‘UFOs’
Full StoryGREEN BUILDINGHouzz Call: What Have You Salvaged for Home Use?
If your floors, furniture, exterior materials or other home elements have a past life, we'd like to hear the story
Full StoryLIFEHouzz Call: What Has Mom Taught You About Making a Home?
Whether your mother taught you to cook and clean or how to order takeout and let messes be, we'd like to hear about it
Full StoryUPHOLSTERYFabric Focus: Make Your Interiors More Durable With Outdoor Fabric
Indoor-outdoor fabric is strong and beautiful, whether in the backyard or the living room
Full StoryARTAn Insider’s Guide to Creating the Perfect Gallery Wall
Bring your room to life with these expert tips for grouping artwork and photographs
Full StoryTHE ART OF ARCHITECTUREMarina City Towers: Life Inside an Architectural Icon
Step inside apartments in the midcentury Chicago high-rises and find out what it’s like to call these landmarks home
Full StoryGARDENING AND LANDSCAPING10 Reasons to Use Black in Your Outside Space
It’s become a favorite shade to use inside, but now black is migrating out to gardens, patios and balconies — with dramatic results
Full StoryFEEL-GOOD HOMEWhat Really Makes Us Happy at Home? Find Out From a New Houzz Survey
Great design has a powerful impact on our happiness in our homes. So do good cooking smells, family conversations and, yes, big-screen TVs
Full Story
desireebrunoOriginal Author