Wooo!!! Cat, I am stuck at home because of the snow storm so wandered around here not looking at anything in particular and came upon your thread. I totally agree with you on the shower curtain choice. Regardless of whether I have the money to spare or not, keeping those suckers clean is a nuisance over time. We have a glass shower door that was installed back in 2003 and I can't tell you how much I hate cleaning it. Not that the door is all that dirty, but a shower curtain is way easier, and you can change the look/style whenever you feel like it. Can't do that with a pricey shower door. Anyway, everything looks lovely as usual, including the "prom" dress :-) Love, love those circular tiles, and the floor tiles that look like fabric. Gorgeous. What colour is that again? It looks greyish on my monitor.

This old thread got revisited. @dani_m08 to answer the question about extra probe, I believe I ordered an extra one when I bought the set up. The probe wire is just setting in the junction box I think but honestly I cant remember. When I laid out the underfloor heating and the probe, I just ran another probe near the first probe, and it was then sealed into the floor self leveling compound as per instructions. then the end was just threaded into the wall like the one that would be live, and not connected, but just laying there in the box. Regarding the tile layout. I just decided to run it this way, after getting instructions on the 90Degree way, IIRC. The herringbone that I love is from my childhood and the side walks in my neighborhood that all ran at 45Degree. so that to me is herringbone. I know you posted on @sochi thread about her amazing bathroom and a wall mounted faucet. I would totally do it if I had the right sink for it. In my case I had made my sink out of soapstone and an integrated backsplash. The pictures of this bathroom reveal are no longer available because of the use of photo bucket, when it was Gardenweb. I did not keep my account with photo bucket. I'll add some of the reveal pictures so you can see the sink and floor. Regarding the sink there is no ledge for water to drip from my hands when using the faucet. The water drips right into the sink. In my other bathroom with a deck mounted faucet I am always wiping up drips and it is a nuisance. I much prefer the setup for this sink. Below: I love the flush finish from the faucet to the bottom of the sink. nothing drips on a counter or edge of a sink. Below: looking in from the doorway. Below: Here I am finishing up the sink. the backsplash was epoxied on as a separate piece. The whole soapstone install in the room took next to nothing to buy as they were all small pieces that I epoxied together with a 3 part stone epoxy. Below: this is the counter at the tub, and is in 2 long pieces but I was able to epoxy them together at there edges to make a wide slab for the top. All the soapstone was finished with a 60 grit sandpaper to be rough and this lovely soft tone of blue/green/gray/white. I did not oil it so this color tone would remain light. Below: If I recall correctly @sochi helped me decide on this Hubberton Forge Mirror. I have 3 different metals in this room, but they are all a cool silver to black color. Below: the center of this tower shares space with the kitchen on the other side of the wall. there is also some extra space that houses some electrical wiring. this is an old simple house. this bathroom was an add on when it got move to the farm in the 30s IIRC. The plumbing was all rearrange and some of the details that were orignially there I kept but updated it, such as this tower feature. The old one went and the carpenter did a wonderful job with this one. Below: This feature was another thing I kept from the old bathroom but flipped it from the other end and had the carpenter put drawers in it. Before it was a hell hole. things got lost and the build was soooo old and creapy I didn't like using it for storage. Now it is perfect for storage.

Would you just glue a sheet vinyl right on top of the other vinyl or would I need some type of underlayment? We have a wetsaw and regular old saw so I thought the Durastone type "tiles" would be easier to fit into corners and such....one wrong cut with the vinyl sheet and there's no mercy for me...smaller tiles don't intimidate me, a big sheet of vinyl sure does! :) Tara

Many thanks to everybody who answered, you have all been very helpful in clarifying my very muddled thoughts. Here is a hopefully clearer description of the situation: The house is a 50's ranch style, with 3 bedrooms and a hall bath (4.5x8.5 ft) clustered on one side of the house, and the kitchen, office/den and another hall bath (4x9 ft) on the other side of the house, with a great room in the middle. We plan to stay in this house as long as we can, but we are in this city for my husband's work, and if something happens (although unlikely with his kind of job), we know we'll have to move somewhere else; therefore, we'd like to make updates to the house while keeping resale in mind. Our (excellent) realtor said that for resale we should have an ensuite. After reading the comments, I have to clarify with him if he thinks a lack of ensuite will narrow down the market significantly, or if we 'simply' would not get the best price for the house. Most houses in the area are old (in the whole city actually), and we saw plenty without ensuites. We saw two of the neighbors' houses, and they did not have ensuites. This is what we considered: 1. Redo the bathrooms with the existing footprint (not that we have room to change anything inside), but we can go far into making them pretty, 2. Add a door from the master bedroom to the hall bath next to it, and close access from the hall. This I think would be a bad idea, not only because the people in the other two bedrooms will have to go across the house to the other bathroom, but also because the master bedroom will end up with windows on two walls, three closets on another, and two doors on the fourth side. Not restful. 3. Add another bathroom next to the master bedroom where the closets are, with one closet door transformed into a bathroom door. This bathroom would be 4.5x12 ft, although it could go to 5x12 if need be (but no more, because we'll hit a big window), which will have a shower but no bathtub. We talked to a professional who said it will fit fine with the caveat that the toilet will likely be the first thing you see in front of the door because of the current clearance requirements. 4. Build an addition. This again I think would be a very bad idea, since it would be blindingly expensive and the house is already on the higher side of square footage for the surrounding area. We will of course fix everything that is broken. The interior doors are the original 50s doors, hollow core dark wood look with lots of scuffs and holes, and they were cut short to fit the now non-existent carpet, so I would qualify changing them as fixing what is broken (and they bug me every time I look at them... ). The windows are a perk; we are still divided on those. I tend toward option 1, while my husband is going for option 3, although he agrees we do not need another bathroom. The reason I feel ill equipped to make this decision is that I'm originally from Europe, and even after so many years here I feel mildly perplexed about the North American love affair with bathrooms. Our previous rental was built in the last ten years and had a huge ensuite which I didn't like. I found it hard to keep as clean as I thought it should be, and it was so large I felt as if I was doing my business in public. Given the bathroom pictures on Houzz, I'm clearly in a minority. Your comments help ensure that I don't miss anything that might otherwise be obvious, so thanks again. And extra thanks to whoever makes it to the end of this post...