Don’t expect seconds from a seconds company to be able to have small grout lines or be flat enough to do any herringbone. And you are NOT getting a good looking herringbone out of any 12x24 tile anway. The size is too large, and the space is much too small for either herringbone or chevron. And the proportion is too off. It’s too wide compared to length. Herringbone needs a narrower tile. And if you actually do mean chevron and not herringbone, you can forget that. No installer is going to hand cut every tile to a chevron pattern without a HUGE upcharges in labor. HUGE. What uncoupling system is going to be used over that plywood? Have you checked the deflection rating of your joists and floor assembly to be sure that your flooring structure isn’t too flexible? Because you will get cracked tile if you move forward and the floor is not supportive enough. You have some Giant Red Flags here. You need to put the brakes on and talk with some competent Pros ASAP. That would be a Kitchen and Bath Designer, and their fully qualified tile contractor. https://www.ceramictilefoundation.org/homeowners-guide-to-hiring-qualified-tile-installer https://nkba.org/info/why-hire-a-designer [https://www.houzz.com/discussions/10-tests-for-you-and-your-contractors-first-meeting-dsvw-vd~5332686?n=90[(https://www.houzz.com/discussions/10-tests-for-you-and-your-contractors-first-meeting-dsvw-vd~5332686?n=90)

thanks everyone. I'm glad you agree with the 12 x 24 because I really like the look. And I will skip the border tile which was iffy in my mind. For the person who told me to fix the layout size, I wish I could. Only eliminating my bedroom closet or an extension on the house could fix the problem. So I'm making the best of it. It works as a 1 person bathroom, and is off the master bedroom so it's not such a problem.

Home Depot is the only place within two hours that sells the pre-fab, and the colors are horrible. I need three bathroom countertops, and the largest is 52". I should be able to find remnants, but I can't even find fabricators who have remnants. Nobody has a website and the fabricators don't advertise, at all. I found six places in Tulsa, but none of them have quartzite remnants. I can only find stone suppliers. I will make a list of suppliers this weekend, and call them on Monday. Maybe they have a list of fabricators near me. Even Google maps didn't have anyone listed near me. They didn't have the two fabricators that are a half hour away from me. What is your opinion on glossy vs honed in a bathroom. My kitchen has leathered Sea Pearl quartzite, and I love it. I prefer matte colors usually, but I doubt I would like leathered bathroom countertops.

Then if that winow counts I would add a pocket door to the bathroom in suzanne’s plan above and do that one, if it were me. You can leave the pocket door open to let more light into the bedroom when you don’t need the privacy of the bathroom. One thing you might also consider is swapping the toilet and shower to get the toilet further from the bed.