It is a sad lesson to learn but you aren't the first to make this mistake if that is any comfort. IF the plants survive they will be safe to eat produce from but I honestly doubt many will survive. A few may struggle along for awhile but likely won't get healthy enough to produce. SO, since it is so early in your gardening season, there is still time to buy some new plants and start over. That way you can still have a fairly good first year garden and you'll feel better too. Good luck. Dave

This old thread got revisited. @dani_m08 to answer the question about extra probe, I believe I ordered an extra one when I bought the set up. The probe wire is just setting in the junction box I think but honestly I cant remember. When I laid out the underfloor heating and the probe, I just ran another probe near the first probe, and it was then sealed into the floor self leveling compound as per instructions. then the end was just threaded into the wall like the one that would be live, and not connected, but just laying there in the box. Regarding the tile layout. I just decided to run it this way, after getting instructions on the 90Degree way, IIRC. The herringbone that I love is from my childhood and the side walks in my neighborhood that all ran at 45Degree. so that to me is herringbone. I know you posted on @sochi thread about her amazing bathroom and a wall mounted faucet. I would totally do it if I had the right sink for it. In my case I had made my sink out of soapstone and an integrated backsplash. The pictures of this bathroom reveal are no longer available because of the use of photo bucket, when it was Gardenweb. I did not keep my account with photo bucket. I'll add some of the reveal pictures so you can see the sink and floor. Regarding the sink there is no ledge for water to drip from my hands when using the faucet. The water drips right into the sink. In my other bathroom with a deck mounted faucet I am always wiping up drips and it is a nuisance. I much prefer the setup for this sink. Below: I love the flush finish from the faucet to the bottom of the sink. nothing drips on a counter or edge of a sink. Below: looking in from the doorway. Below: Here I am finishing up the sink. the backsplash was epoxied on as a separate piece. The whole soapstone install in the room took next to nothing to buy as they were all small pieces that I epoxied together with a 3 part stone epoxy. Below: this is the counter at the tub, and is in 2 long pieces but I was able to epoxy them together at there edges to make a wide slab for the top. All the soapstone was finished with a 60 grit sandpaper to be rough and this lovely soft tone of blue/green/gray/white. I did not oil it so this color tone would remain light. Below: If I recall correctly @sochi helped me decide on this Hubberton Forge Mirror. I have 3 different metals in this room, but they are all a cool silver to black color. Below: the center of this tower shares space with the kitchen on the other side of the wall. there is also some extra space that houses some electrical wiring. this is an old simple house. this bathroom was an add on when it got move to the farm in the 30s IIRC. The plumbing was all rearrange and some of the details that were orignially there I kept but updated it, such as this tower feature. The old one went and the carpenter did a wonderful job with this one. Below: This feature was another thing I kept from the old bathroom but flipped it from the other end and had the carpenter put drawers in it. Before it was a hell hole. things got lost and the build was soooo old and creapy I didn't like using it for storage. Now it is perfect for storage.

wowed, I agree with your response, and it's interesting to me. I would want at least sound, if not visual, separation, between a lavatory/dressing area and a bedroom. It's interesting to compare the bedroom/lavatory area/toilet and bath area layers to a palace set up: the anteroom, the throne room (no pun intended) and then private quarters. In the same way, access and function are layered. I think most users would agree this sort of layering is a good thing. Contrast this to the evolution of design of the kitchen/dining/family room area of a house. For me, sound separation of activities (eg., tv watching vs. a conversation in a dining room, or relaxing in the family room without the din of dish stacking) or visual separation (chatting with guests in the dining room while not worrying about how the busy food prep area looks) or even olfactory separation (reading a book in the family room while onions are sliced and sauteed in the kitchen). The grand, open flowing floorplan for these areas is popular, but for me, I prefer a little segregation, especially as the number of users and potential simultaneous uses goes up. Seems to me, as the average household size has shrunk and more people are living in a house of only 2 or 3 people, sure, the open floor plan can work. But for now at least, I want a little bit of separation of activities, and I like my "antiquated" floor plan, with separate kitchen, dining room, family room (tv) and living room (piano). A tv and piano in the same room would be a nuisance for us. So I guess on a more micro level, I'm looking to separate activities in the bathroom. But I agree, if in the process of pulling them apart and relocating them, I mix grooming and sleeping, well, yes, that would be a disastrous unintended consequence! responding to another post, I don't know why that link didn't work, here is the direct url: http://www.farrow-ball.com/Company/FBStyles.aspx?language=en-GB&style=5

I actually had alot of fun with it, except for the times I was frustrated, impatient and going crazy because of the mess in the rest of the house :) I have a computer program that helped me plan it out. Thank you girlcat. stayn, The sink measures 20 X 14 from the outside edges. With it being undermounted it measures about 19 X 13 1/2. I bought it on ebay before I had even demo'd the bathroom in January. I'd have to look at my pile of receipts to be sure, but I think it was $140 including shipping. I was really excited when I finally stumbled onto it because I'd been looking for something that would work for an 18" deep vanity for awhile. I don't remember the vender it's been so long ago, but I found it by typing in 14" vessel sink on ebay. ann, the chipped edge granite was a chunk that was left over from when they cut my countertop. I had asked them to give me all the stuff they normally throw away. I thought it was perfect, so I cut it to fit there and polished away the sharp edges. Most people that see it like it but one person (my Dad, when I sent him pics)thought it was "temporary". he he...