Wow, thanks bumble doodle! Tt is great to know that the tub works well as a shower. We are tall too--at least most of us (two of my teenage daughters are twins and one is 5'2" and the other is 5'10", so maybe the short one complains a bit but that's ok, since she complains about everything!) We are getting the non-jetted version. Also, I am hoping that building the deck at the front will help with the water spray. I am pushing the tub back into an alcove under the window the long way (so we get into the tub at the 32" side rather than from the 48" side) and we are trying to go without shower doors in order to make the bath feel open. With a deck, we buy a few more inches of length to help avoid water on the floor. We may not succeed and will put a panel on if we have to. Any thoughts on this?

Thanks for all your thoughts! homeybird- we did briefly consider the wetroom idea, however, we're in Maine (brrrrrr), this room has 3 exterior walls and a poorly insulated floor, AND we need to be a little more traditional for resale. igloochic- Well, right now there IS no office. That is all part of a gigantically long master bedroom. It's stupid space in my opinion. I work at home and NEED an office, so right now my desk is set up there, open to the bedroom. I HATE it. Hate the computer lights and hum, hate seeing the piles and cords. I want my bedroom to be a calm place to escape and unwind. This house is teeny, so there is NO other place for my office to go. (Plus, we think being able to claim 3BR is a plus for resale. Target market will either be a young family or retired couple. Either way it seems like 2 normal-sized bedrooms and a small nursery or home office is a desireable combo. Honestly, there's no other place in the house where a home office could go....) weedyacres- I'll play around with that but my DH is going to be mad. We're having a heck of a bad year, renovation-wise. We started the kitchen/LR/DR renovation in April and soon discovered some very major drainage problems. We'd hoped to complete the exterior renovations this fall but the money we had to spend on the stupid drainage problems has left us utterly broke. Then DH got temporarily furloughed and I am not working either, and both cars are dying. It's baaaaad. BUT we HAVE to address this bathroom this month because it is -quite literally- making me sick. There is a huge mold problem in there. It's sealed off with painters tape right now because I was so sick from it. DH is going to have to cut a hole in the exterior wall, go in there and start gutting it until he finds the source of the mold (we suspect it is in the insulation, possibly the sheathing and studs, hope not!!). ANYWAY. It is not the best scenario to start a renovation. The kitchen's still not done either. And we're out of money. So we're leery of making too many changes. Even doing it all ourselves, having to reframe and redrywall and trim out all those extra walls is sure to add at least a grand, don't you think? Plus, our Washer & dryer are currently in the north closet...... WEll, I will draw it out and play around with it...... thanks for thinking outseide the box anyway.

agree with ravencajun that there are some really nice handhelds out there that rival or even beat a basic fixed head, plus their utility for cleaning is critical to me. Another option is to place the handheld on a slide bar so you can adjust to different heights. This is especially nice for kids or folks with very different heights. Unless you have a wide tub, I would be inclined to go with a really nice handheld on a bar and the tub spout, otherwise as linelle pointed out it will get busy with so many fixtures. Plus you will need additional diverter valves and trim for extra fixtures and you may decide that money might be better spent on upgrading the shower head (or some other part of your redo) We went all out in ours, but it is a good sized shower only - but you can see what it looks like in the picture below with two fixtures on one wall. I forget the exact dimension, but it is probably at least 40" across. Here is a link that might be useful: Master redo

That alcove is designed to house a tub only, not a tub shower unit. You can't "repurpose" what's there without water damage to your floor, window, and behind your walls. The tub itself not designed to be used that way, and neither is the window designed to be in a wet area. You'd need to rip it all out and start over by installing a smaller and waterproof window, then installing a tub that had an integral tile flange which is part of the waterproofing system needed. Then your waterproofing membrane and whatever wall cladding you might want.