You're good to go, but just for sanity's sake take a look at the controller next Tuesday. It should show "1 day remaining" the day before you want to water.

ff, You didn't mention if this is a new controller, installed by you or a contractor. Hunter does try to help you with your problems. Let us know what you find out. Link to Hunter support: http://www.hunterindustries.com/support/?f[0]=im_field_customer_type%3A61&f[1]=im_related_product%3A241 Contact info: http://www.hunterindustries.com/contact-us Aloha

The info on Delay is on page 22. I know this only because I have a manual. I'm dealing with my unit refusing to set time cycles for anything after Program A.....will not hold B or C and won't reset. I'm so frustrated I'm thinking of replacing it with a Rainbird. I have Rainbirds in 3 other places and they haven't failed in 9 years.

Hi - I recently seeded, and was told I needed to run my sprinklers every day for 20 minutes. So, rather than mess with my regular schedule, I decided to use program B. I set the program A start times to OFF for all 4, and set up program B, with one start time, but...on the "days to water", it shows every day as "blank". no rain drop, no rain drop with a slash, just blank. If I hit the up arrow, it changes to a rain drop with a slash and advances to the next day, and down arrow switches it back to blank. never get a rain drop. is this right, is this going to work as I expect? (the manual doesn't mention blank, it only mentions rain drop or rain drop with slash!)