Oh thank you loves2cook. It's good to hear that these little postings can be of help. There are some wonderful books and blogs on food photography, some more technical than others, and certainly better than what I write here. I'm trying to keep it simple for now, and haven't mentioned words like aperture, shutter speed, ISO, so as not to frighten anyone LOL....at least not yet! SharonCb

Thanks Phyllis! Yes I have seen that idea as well as using a 5 gallon white plastic jug from laundry softener and cutting a hole, or a big white plastic basin. A lot of the success depends on the strength of the lamps you use outside to light up the inside of the container. And if you have a DSLR with a flash that can be tilted up towards the ceiling or behind, you can use an airline barf bag (excuse the term) slipped over the flash attachment to diffuse the light. I'm uploading these tutorials onto their own blog, at the rate one per week, with links to other interesting places and will also be adding some sections on using a DSLR: aperture and depth of field, understanding f stops, shutter speed, bracketing exposures and a little more. SharonCb

Posted by canarybird (My Page) on Wed, Aug 5, 09 at 15:32 Food Photo Tips: Part 5 - Artificial Light Hi again everyone. I'm back with another entry on how to use your digital camera for taking tabletop photos. Finding the right illumination for taking food photos after dark can be even more challenging than finding the right window for daylight photos and much has been written about it. It would be an ideal situation if we all had a room off the kitchen with studio softbox lights set up over a table where we could just whip down the plated food, snap the shutter and then breeze back into the kitchen to serve the family dinner before it got cold. Those with large, well lit kitchens are lucky to have perhaps focal lights over a counter, or a well illuminated baking centre, ideal for photos. It is known that the larger the light source, the softer will be the shadows and conversely, the smaller and closer the light source, the sharper will be the shadows. So an ideal studio situation would be to have an illumination diffused enough so that it cast a flattering light without creating heavy shadows, used perhaps together with secondary lights and reflectors. Flash should never be used for food photos as it flattens the images so the result is most unattractive. But most of us have to cope with less than perfect conditions with over the counter strip lighting, lights in the stove exhaust hood, a lamp over the dining table or a small desk spot in a corner of the kitchen. This is an extensive subject which has turned into a large entry for today, so I'm going to separate it into paragraphs of different situations, showing how to cope with a certain type of lighting and equipment so you are able to digest it a bite at a time. 1. Worst Case Scenario - The Small Kitchen - One under-cupboard tube FLUORESCENT LIGHT: In this case, my tiny kitchen ...which has one old fashioned 8 watt fluorescent tube to illuminate the counter. Above you see the improvised studio: a white cutting board placed behind, a white paper towel as reflector hanging over the paper roll, a piece of white foam as reflector left, and the subject placed on a white paper napkin draped over two cereal boxes. Took just a minute to set up, and it worked fine, considering the less than ideal setting. Here's the result: Since indoor lighting is much weaker than daylight, the shutter speed of your camera will be slower, and the Scene settings such as Indoor, Candle and Available Light on your point & shoot will make that adjustment when you choose that scene. When the shutter stays open longer, any slight movement of the camera will cause a blurry photo. To put it simply, you really need a tripod when taking photos indoors after dark unless you can brace yourself and the camera so there isn't the slightest movement. To take this photo above in the weak light from the little 8 watt bulb I made several tries handholding the camera but without success, so I set up the tripod and was able to get a fairly decent photo. If you are trying to photograph your food in these light circumstances, you will need a tripod. In most cases there just isn't enough light to do it otherwise when avoiding flash. The camera was set to Scene: INDOOR, White Balance (WB) set to FLUORESCENT 1 (that's the first of those centipedes on your WB menu), and the Exposure Value (EV) was raised to 0+.3....that's one notch up from 0.0. More details on settings for anyone who likes to know: Shutter speed 1/25s Aperture.f/4.2 .ISO 800. How are you doing so far? I hope you find it still easy to understand. 2. Overhead Lamp - TUNGSTEN - single 60 watt bulb These are the incandescent light bulbs which are being phased out to be replaced by the new CFL (compact fluorescent lamp) bulbs which are much brighter at lower wattage and cooler temperatures. But many of us still have these in our homes and so I used this as an example of how to get by with just one such desk or floor lamp shining down on your subject. You may have to raise it up nearer to the lamp by using some books and a cloth covered tray. In this case I just put the plate on a small side desk under the light, and set up reflectors on either side.....the right side with the old photo frame and a piece of white printer paper clipped to it and on the left side another piece of white paper taped to the bookend. I'm quite pleased with the result, although it could have been a little brighter if I had used the EV (Exposure Value) button to lighten the photo with a setting of +0.3. Such a brightness can be adjusted in a post editing program. See what happens in the second picture when the AUTO white balance misread the light. This often happens when you forget to change it to TUNGSTEN, The camera in the left photo was set to Scene: PORTRAIT, White Balance (WB): TUNGSTEN, with no EV +/-. More details: Shutter speed 1/40 Aperture f/3.9 ISO 100 3. Overhead Lamp FLUORESCENT 1 1 CFL bulb Here I changed the incandescent (tungsten) bulb for a new compact fluorescent bulb (CFL) at 11 watts in cool daylight colour. Here is the picture that came from using that lamp, with the same setup as above in number 2, with reflectors either side. These bulbs are wonderful because they dont heat up, they use lower wattage for the same light intensity as a tungsten bulb and they last for ages. The camera was set to Scene: PORTRAIT, White Balance (WB): FLUORESCENT 1, with no EV +/-. More details: Shutter speed 1/40 Aperture f/3.5 ISO 100 4. Overhead Lamp and Small Spot FLUORESCENT 1 2 CFL bulbs Here is another setup on my desk, with a white paper sweep as backdrop , an overhead swivel desk lamp with a 15 watt CFL bulb and a mini spot light on one side with a 7 watt CFL bulb, the photo frame on the right as reflector with a piece of white printer paper clipped to it. If you were doing this in a photo studio, the lights used would be of a higher wattage and the whole setup would be more professional and perhaps the reflector on the right would be replaced by a third spotlight. The photo resulting from this homemade arrangement is on the right above. Ive used the first of the three fluorescent settings my camera offers. Its a little warmer than the other two. This is what happens when you mistakenly use a TUNGSTEN setting for your White Balance (WB) instead of a FLUORESCENT setting (Remember the centipedes). More about those CFL lamps: Heres the one in my desk lamp. It uses 15 watts and puts out the same light as a 75 watt tungsten bulb. Im also showing the card it came on as well as a closeup of the tiny 7 watt spot. You can see that the 15 watt bulb is rated as cool and it has a Kelvin value of 6400k. The Kelvin scale is one used to determine the temperature colour of light. The higher the number, the bluer or colder is the light. The lower numbers are for warmer light. The Kelvin rating of 5000k and 5500k are considered to be the same as pure white and noon sunlight and are therefore best for taking photos that resemble daylight. The store where I bought mine didnt have any at that rating but the 6400k , which you see marked on the card from the package, is also considered a daylight fluorescent lamp. If you need a warm fluorescent CFL for your house, look for a Kelvin rating around 3000k. Candlelight is rated at 1500k. The camera was set to Scene PORTRAIT, White Balance FLUORESCENT 1, with no EV +/- More details: Shutter Speed 1/25, Aperture f/4.0, ISO 100 5. Restaurants Overhead Tungsten Lamp(s) + Candles You may have to look underneath the lamp to see if its a tungsten (incandescent) bulb or a CFL (fluorescent) but when its combined with candlelight for a cosy romantic setting you could wonder what setting to use on your camera without resorting to flash. I would go for the INDOOR Scene setting and then try looking through the viewfinder with the White Balance (WB) set at TUNGSTEN and if everything looks blue, then you know you have to switch the White Balance to a fluorescent setting. The camera was set to INDOOR Scene, WB TUNGSTEN, with no EV +/- You could also try out the Scene setting of AVAILABLE LIGHT if you have that on your camera. It has a slower shutter speed so you will have to brace the camera and hold tightly and avoid any movement when you press the shutter. This is true of all photos you take in low light without a tripod. If there is more candlelight than electric light, try the CANDLELIGHT setting as well. A look through the viewfinder before snapping the shutter will tell you if the setting is right for that scene. You can ask your table partner to hold up a white napkin on the dark side of the subject to reflect some light onto it while you take the photo. I have done that. Of course it might attract some attention, but where we live there are many tourists and they often take photos of the food on their tables while on holiday, so here it's not unusual to do so. More details of 2 photos above: Shutter Speed 1/60, Aperture f/2.8, ISO 2500 Shutter Speed 1/20, Aperture f/2.8, ISO 2500 Another Restaurant Example: Overhead Tungsten Lamp : Here there must have been more than one bulb in this quaint array of bottles but you can see the atmosphere, bright on the table and indirect light on the diners. I believe I set the scene to PORTRAIT, but it could also have been INDOOR, The White Balance (WB) was set to TUNGSTEN with no EV+/- change. More details of first photo: Shutter speed 1/20 (Im amazed it turned out without blur), Aperture f/2.8, ISO 2500 Second photo of chips: Shutter Speed 1/125, Aperture f/2.8, ISO 2500. 6. Candlelight I didnt have a tripod for this but I braced myself and stopped breathing for a moment (not a good thing to do on your birthday) while pressing the shutter. Normally you would need a tripod for such a low light photo. I still dont know how it came out without blurring. The scene was set to CANDLELIGHT, White Balance (WB) AUTO and no EV+/-. More details: Shutter Speed 1/250, Aperture f/2.8, ISO 2500 Well I hope you have enjoyed reading today's entry and have found it useful. If you have questions please post them here or send me a PM. :-) Next week Ill show you how to make a mini light box and later well make a full sized one. I have mine started but need some more materials from the craft shop. In the meantime heres a preview of the mini light box and what you can do with it: So thanks for joining me. I'll be uploading the next installment soon. And please feel free to save the pages on your computer. Sharon (Canarybird) :-) (All text and photos copyrighted) Free for personal, non-commercial use Follow-Up Postings: o RE: Food Photo Tips: Part 5 - Artificial Lighting clip this post email this post what is this? see most clipped and recent clippings * Posted by happygram (My Page) on Wed, Aug 5, 09 at 23:53 You are completely awesome. I wish there were someone like you nearby who'd be teaching a photography course. Thanks so very much. Your time and effort are most appreciated. Mary o RE: Food Photo Tips: Part 5 - Artificial Lighting clip this post email this post what is this? see most clipped and recent clippings * Posted by shaun (My Page) on Sun, Aug 9, 09 at 9:03 If you published this in book form, it could be a Best Seller. Thanks. o RE: Food Photo Tips: Part 5 - Artificial Lighting clip this post email this post what is this? see most clipped and recent clippings * Posted by canarybird (My Page) on Sun, Aug 9, 09 at 19:34 Thank you Mary and Shaun. I hope you find some useful tips in these tutorials. :-) SharonCb

Posted by canarybird (My Page) on Wed, Aug 12, 09 at 11:45 Food Photo Tips: Part 6 - Making a Mini Light Box Hi again everyone. I'm back with another entry on how to use your digital camera for taking tabletop photos. This time I'm going to show how to make a miniature version of a light box, which can be useful for photographing small objects. I'm also working on making a full sized box out of a cardboard printer box which will be used for photographing larger objects, including plates and dishes of food. Mini box (left) Full size box under construction (right) But it might be easier to practise with a mini box to test your results and your skills with a box cutter or sharp scissors. If you have a handy teenager, (or other person clever with crafts and model building, who won't cut off a finger with the box cutter) you may enlist some help with this although it takes less than an hour to make, requires no special skills and doesn't have to be good looking. The idea of a light box is to create a partially enclosed 'white room', with white walls, a white sweep (that paper background we made previously in Part 4 - Seamless Backgrounds), with cutout windows and ceiling covered with white paper, into which we project a strong overhead light and usually a light on either side aimed at the white paper windows so that any object introduced into the box will be bathed in total white light with no shadows. You will have often seen pictures on the web of an object which seems to float on a pure white background. Eg: Cook's Thesaurus. This effect can be achieved in a light box. And it's quite entertaining to see what you can produce from this setup. These last two pictures were taken with my 15 watt CFL desk lamp overhead and one 7 watt CFL spot lamp (that green one) at the left window. Even better would be a 2nd spot pointing at the right window. (I need to go out and buy that 2nd spot lamp...they cost about $12 here so not an expensive item and good for the mini box.) Construction of the Mini Box: Materials needed: small box of sturdy cardboard, box cutter or small sharp scissors, ruler or metal straight edge, pen, glue stick, white paper (I always seem to use printer paper.) I used a small box measuring 5.25 x 7 inches (13.5 x 18 cm) that contained a little desk lamp. You can use a larger box as well of course, but your lights will have to be accordingly more powerful. And I think it's better that you keep it as a vertical box, higher than wider, so that the lid opening will be your ceiling. We can still make the bigger box later once we have caught the idea of how best to create the whitest environment. On my little box I took off the top flaps of the lid and using a box cutter, cut out windows on the sides, leaving a frame of cardboard about 1 inch (2.5 cm) all around, except for the bottom edge of the front 'door' which I cut off. Then I took white printer paper and after cutting it to the size of one side (5.25 x 7 inches/ 13.5 x 18 cm) glued it with a glue stick into the INSIDE of a window side, then repeated that on the inside of the window facing it. Glue carefully and smooth out any wrinkles, which would show up in your photos. To further cover the edges, cut out strips of white paper to size and overlap the newly installed white paper to the back wall and the floor, smoothing carefully so the edges are well stuck down and wrinkle free. Do this on both window sides. Cut a paper sweep to go inside your box, but DON"T GLUE it in, just slide it in so it is removable when it becomes spotted . The measurements should be....width a little smaller than the width of your box. In my example, with a 5.25 inch (13.5 cm) box width, my paper sweep was perfect at 1/4 inch less than the box width...that is at 5 inches wide (11.5 cm). Length of the sweep:....start with a piece of paper a little shorter than the box height plus the box depth (from back wall to front door) and slip it into place until it reaches the edges of the door, as in the photo below. Check that you have a nice curve in the sweep, that it reaches the 'front door' and trim off any excess that sticks up over the top at the back. The finished box should look something like this. Many light boxes also use a thin sheet of paper...often white tissue paper or white tracing paper over the 'roof' of the box and this will give you a soft diffused light. If you are going to photograph any reflective item of metal, ceramic or glass you won't want a reflection of the light bulb in the top lamp showing on your object, so you should then use a thin white material or paper to soften the white glare. If you have a good strong light on both top and sides you will be okay with the diffusor on top as the light will be sufficient. If the light is too strong, then move the lamps away a little from the box. Some examples with fruit: First a sideview of the setup and one example of creating a very soft photo using Exposure Compensation (EV +1.3)... that's 4 clicks up from 0.0... to give deliberate over exposure. Here I was able to get photos using just the overhead desk lamp. If you don't have extra lamps (they must all have the same type of bulb...tungsten or CFL, not mixed) see how you can do with the overhead lamp close to the top opening of your box and raising the EV value to make the picture lighter. This you can do while looking through the viewfinder before taking the photo. A little less raising of the Exposure Compensation, that is.... pushing it up 3 clicks (instead of 4) to EV +1.0, makes the image a little less over exposed and more defined (left photo). With no EV changes to the picture, you would have a normal exposure, as in the second photo. Now you know how to make misty white photos if you wish to have that effect. When you raise the EV value using the plus+, you are actually decreasing the shutter speed of your camera, so it stays open longer, lets in more light and gives you a more exposed (lighter) image. Conversely, when you lower the EV value using the minus -, you are in fact increasing the shutter speed, the shutter closes sooner, letting in less light and your image is darker. If you manage to make this mini light box, try using a PORTRAIT setting, and maybe add a click on the MACRO option as mentioned below. Remember to set the White Balance WB for the type of bulb you are using...hopefully you have a CFL fluorescent in there, and practice using the EV button to lighten or darken your image while looking through the viewfinder. I think this is enough for one day but I did want to introduce MACRO, or closeup photography. If you look at the back your camera you will have noticed a little tulip icon somewhere on or near the round touchpad. That is your option to tell the camera that you want to make closeup photos. You should be able to click on it from any of the other options that you have, such as AUTO, PORTRAIT, INDOOR. By clicking on the tulip icon you will probably bring up three options: OFF, the tulip icon representing MACRO, or another tulip icon with a small 's' beside it. Some point and shoot cameras may not have this second tulip but it refers to SUPER MACRO where you can get even closer to your subject. Try it out....remember you can still be in another mode and add the macro option. I'll explain more next time with examples of how you can capture very close, sharp pictures of food, insects and plants. I hope you are understanding it all and if you have questions please ask here or PM me. So thanks for joining me. I'll be uploading the next installment soon. And please feel free to save the pages on your computer. Sharon (Canarybird) :-) (All text and photos copyrighted) Free for personal, non-commercial use Follow-Up Postings: o RE: Food Photo Tips: Part 6 - Mini Light Box & Macro clip this post email this post what is this? see most clipped and recent clippings * Posted by loves2cook4six (My Page) on Wed, Aug 12, 09 at 22:36 Ahh Sharon. THANK YOU!! When will the book be published :) I'm going to be the first to buy it! o RE: Food Photo Tips: Part 6 - Mini Light Box & Macro clip this post email this post what is this? see most clipped and recent clippings * Posted by ntt_hou (My Page) on Sun, Aug 16, 09 at 20:25 Wow, I learned more in these 6 parts than some photography books I have. Thank you so much !!! o RE: Food Photo Tips: Part 6 - Mini Light Box & Macro clip this post email this post what is this? see most clipped and recent clippings * Posted by antiquesilver (My Page) on Mon, Aug 17, 09 at 19:32 Ditto to what ntt_hou said! And now I'm going to make a light box so I can photograph my silver. Your instructions are great. Thanks for taking the time to do this. Hester o RE: Food Photo Tips: Part 6 - Mini Light Box & Macro clip this post email this post what is this? see most clipped and recent clippings * Posted by canarybird (My Page) on Mon, Aug 17, 09 at 19:56 Thank you again for your comments! They are appreciated. I'm looking forward to seeing your results. Hester I'm sure your silver will look beautiful in a light box! SharonCb o RE: Food Photo Tips: Part 6 - Mini Light Box & Macro clip this post email this post what is this? see most clipped and recent clippings * Posted by antiquesilver (My Page) on Sun, Aug 30, 09 at 0:38 Finally got around to semi-finishing my light box - WOW, what a difference! I gave it a quick trial run using an under counter light as an overhead with a thin cloth on top & a POS snake light on one side. I'm amazed that I got good shots without a tripod, although I know it will be necessary when I use a macro lense for the maker's mark photos. I didn't have time today for that, but wanted to thank you for taking time to enlighten all of us who aren't quite in the 21st century - at least photography-wise! Florentine Pie Server Florentine blade detail Florentine Shoulder detail o RE: Food Photo Tips: Part 6 - Mini Light Box & Macro clip this post email this post what is this? see most clipped and recent clippings * Posted by canarybird (My Page) on Sun, Aug 30, 09 at 6:40 Lovely shots antiquesilver! The focusing looks good but you do need a stronger light to brighten up the images. Keep the thin cloth on top as you have done to avoid sharp reflections on the silver (beautiful piece by the way,) and raise the Exposure Compensation (EV) higher...start with +0.3, then +0.7, and +1.0, taking one or two shots at each and see how they turn out. You would need a tripod as changing the Exposure Compensation will probably slow the shutter speed, opening up the possibility of camera shake. I would also check the ISO setting if you can do that. Perhaps that's not possible if you are using an automatic setting. Raising the ISO increases the camera sensor's sensitivity to light, so a higher number makes the photo brighter. (Same as when using film we could buy ASA 100, 200 or 400 for different film speeds.) For sure you can change the ISO when in manual or semi-automatic modes, which show as M, A, S, or P on your mode dial. I'm so glad to see you are trying this out and showing your photos here! Keep going....you are doing well! SharonCb o RE: Food Photo Tips: Part 6 - Mini Light Box & Macro clip this post email this post what is this? see most clipped and recent clippings * Posted by antiquesilver (My Page) on Mon, Aug 31, 09 at 15:06 I need to buy at least 1 more lamp but I wanted to try it out anyway & the difference (box vs. no box) is amazing even without the needed adjustments. Taking a decent photo of silver without glare, blur, & a tripod is no small feat so P&S is a small miracle! I did play with the EV but overexposure was a problem when going higher; maybe not so much overexposure as a loss of silver details - another problem w/silver. Yesterday, I realized the overhead light I used is halogen & I changed my setting to adjust for it & that got rid of the yellow tones. I can't remember if I can change the ISO in Portrait mode or not - I've found so many things on this camera that I didn't know were there, it's mindboggling! FYI - it's a Panasonic Lumix. o RE: Food Photo Tips: Part 6 - Mini Light Box & Macro clip this post email this post what is this? see most clipped and recent clippings * Posted by canarybird (My Page) on Wed, Sep 2, 09 at 18:01 Antiquesilver...I imagine that ISO is not changeable when in any semi automatic mode. The camera wants to do that for you so it will most likely be automatic. However you should be able to raise the EV just one notch up to +0.3, or get a stronger light bulb. Also try substituting the thin cloth with white tissue paper or tracing paper. The cloth might be cutting out too much light. I know what you mean about too strong a light blowing out the detail on the silver pieces. But keep experimenting to get the right combination of camera setting, light and diffusor. If you are interested in reading photography books, I can highly recommend this one "Light - Science & Magic. An Introduction to Photographic Lighting."" by Fil Hunter, Steven Biver, Paul Fuqua. There are detailed explanations of setting up tabletop lighting with a whole chapter dealing with how to photograph metal objects. You might want to have a look in your library or bookstores. The ISBN (I have the 3rd edition) is: ISBN-13:978-0-240-80819-2 , published by Focal Press. Tutorial number nine will be a few days late this week. Probably have it ready for the weekend since we had a lot to do this week, including rescuing our new cat from a neighbour's locked backyard LOL. (All turned out well there.) SharonCb