Just update it. It will not affect your data.

If your situation is that you have one particular kind of card you use a lot -- and want uploaded to your computer a lot -- strongly advise spending $20.00 for dedicated reader for that type of card with USB2 connection. I suspect you may find it much more convenient and probably a lot faster reading/writing also. Most mfg use these multi-reader things as a marketing ploy to make people think they're getting lots of extra value by buying their box. In fact, they slapped the cheapest, slowest pieces of dung they could find into those boxes that still allowed them to advertise "multi-media reading kiosk built-in!" They're typically very slow and very troublesome. HP is especially famous for this, but they all do it. I have little doubt that's what you've got.

Yes, if all else has failed I would remove the program and start over. Most HP printers seem to require you to start your program install with the printer not even connected to the computer. At a given point you will be notified to connect and the computer tries to recognise the printer and the process moves on to completion. Silly time now but you seem to be running out of options to try. Have you got a Works version created before the year 2000? If so did you install this patch? If not and you do not have it you can download it from here. It is the third option from the bottom. Seems foolish but we never know with these gadgets of ours. I had an unsettling day with my HP yesterday while printing labels. The humidity was causing pages to stick together to get my rankled to begin with. Then the printer would not start the print job. Hmm, checked everything. Eventually I discovered my labels were wider than the allowable settings so a notice popped up advising me. But in an instant the "I am printing" notice popped up covering the first notice and the printer could not start till I acknowledged the error that I was unaware of LOL.

snookums - I do lean towards the warmer white and the ORB hardware, just like the finishes in your pictures (love those pulls!). That's a great example of white cabinets blending well with the copper and natural wood details. I just posted on my other post on Home Dec that if I paint my current cabinets I would use SW Antique White, which matches all my trim, and I think that's pretty close to what you've shown. Of course, the style of my cabinets aren't as beautiful as all the ones in these pictures, but it could make a big difference! Thank you, rosie. Those are my wood floors, although I have slate tile in the kitchen (shown below). I really like that too and it will stay if I paint my current cabinets, but will be replaced if I do a larger-scale remodel. I'm not sure if I would bring the soft pine floors into the kitchen or choose another tile floor. We've done several improvements - replaced all the electrical, drywall, ceiling, paint, new wood slider and crown/baseboard, and installed the recessed lighting and pendants, but everything else is from the PO. I've since replaced those terribly uncomfortable metal barstools with Pottery Barn wood stools. We're shopping for a stainless steel counter-depth refrigerator right now and I'd like to switch out all the appliances, because I know having mixed finishes is going to bother me. I also wouldn't want black appliances if I paint the cabinets white. There's a lot of wasted space on the other side of the room that I would like to expand into with a stand alone island and more cabinetry if we do a larger-scale remodel. I don't usually post pics of my kitchen but here goes.