i have a 1999 philips magnavox big screen model #9p6034 c102 was watching tv and then it made a static sound and then no noise, i have tryed to turn off & on tv and put volunm up & down but nothing. the picture is working fine, just cant hear anything. please help!!!! it's driving me nut's not hearing anything thanks and the chassis model number is ptv835

I'm sorry I guess I should be asking pee wee for help.

I have the same TV.After I change capacitor 0.001uF2KV. close to fly back transformer I got another problem is the yellow color is come out too much instead of the white color. Is that posible when I clean up I accident move some O-Ring in the end of CRT.Tube?(there're 6 O-ring Adjustable) Please help Thanks

PW, Thanks for replying. I am sorry about the poor description - When the TV shuts down I also lose the sound. When I begin to see a picture (after about the 7th on and off cycle) the picture fills the screen from top to bottom but is only about 2 or 3 inches wide in the center of the screen . On the next on and off cycle the picture continues to be full top to bottom and begins to get wider. On about the 10th on and off cycle the picture and sound will stay on and the picture will be full top to bottom - the width of the picture will be full on the left side of the screen but will be indented on the right side of the screen about one inch (there is also a little bit of wave on the right side of the pitcture)- after about 5 minutes the picture will finally fill out the entire TV screen. Thanks for your help