i checked my invoice to make sure i didn't create the bargain in my mind. my memory was a bit off - i actually paid 1.68 a piece, after a 10% off coupon. no special HD, just our local one in st. pete fl, and i ordered my tile before thanksgiving last year. the chair rail was hard to find in the HD dal catalogue - it took awhile (i think it was in the "liners" area). it is chair and not bullnose; description states 010026cr1p2 as the dal item number. the corner pieces were pricier, at 2.93 a piece (0100crc1p2 if you need those). there's still some old bananappeal stock around here at the discount tile stores - their white is a pretty good match for dal's 100 and the stock ao at lowes. i picked up some 6 inch bananappeal liners for 25 cents a piece.

Should the grout be the same color? Not necessarily. Will it look weird to use a darker gray on the floor and a lighter gray in the shower? Not at all. Any recommended colors for the shower and floor tiles along these lines? I've been getting stuff at Lowe's and they carry MAPEI Warm gray for the subway tile, and silver for the hex, if you lke a darker grey for the hex. Silver is actually a medium grey, but it'll appear alot darker with the white tile. Our bathroom isn't perfectly square. I think a colored grout seam that is uneven will be really obvious(that's my understanding where you would do any flubbing). Can you grout just the seam white? Can you skip grout and caulk it? Any suggestions here? Grout everything on the floor the same color. it'll actually show up more if you try doing what you suggested. It'll literally draw attention to it. What you want to dpo is make sure that you're square to the most obvious walls from the door. Especially with the hex, it won't be quite as obvious as you think, unless it's WAY out, and then nothing you can do will hide it, even using a blending color grout. One other thing-- that joint where the floor hits the walls should be caulked, but still caulk it with a caulking that matches the grout, both color AND texture. Does anyone know what the measure is for hex tile and subway? For subway, use unsanded, and for the hex, use sanded.

Thanks for your comments, all! (Pardon the lack of formatting, I've been typing this all on my phone!) ____________ Roarah: I think the marble-look hex option looks great! And the grey tile for herringbone is lovely too. I actually was set on doing a herringbone floor at first until it became more difficult to source a 3x20 or 4x24 length tile (I prefer a very long and lean look with a herringbone). Not sure if this will help you differentiate/decide between them, but the herringbone in that size feels a bit more modern to me, whereas the marble hex feels more classic/luxurious but I'm sure either choice will be beautiful on your floors! mrsshayne & grannysmith18: Thanks for sharing your experiences (I've been researching the heck out of those who've lived with penny tile floors to see if they ended up loving/hating them; interestingly, I found much more info on the black penny tile look but not a lot regarding white (except not to use white grout). Yeah, I think the amount of grout and worrying about it getting dirty is what's holding me back. Also, whether having such a large floor area of penny tile will be visually overwhelming instead of soothing and inviting. ____________ Latest Update: I actually returned the original 12x24 grey Porcelain (it was beautiful but was a bit rough in texture which I wasn't sure I wanted underfoot in the bathroom) and ended up buying a White Penny Porcelain mosaic with Mapei Flexcolor CQ Frost grout for the floors. However (>_<), I still can't help but have that nagging sense that this isn't the "right floor" yet... I realize I'm doing the penny or considering hex tiles because I feel like I owe it to the Victorian gods to be historically accurate but at the same time, if we could just have a smooth, one surface (minimal grout lines), white or light grey colored, easy to clean floor, I would. In other words, I feel like I'm trying to put in penny or smaller hex cause that's what it seems like I'm "supposed" to do, but I can tell that I don't actually love them (except for the marble hex which is out of our budget, since we have over 100 SF to tile) which is probably why I ruled them out in the first place, sigh. So I'm still in dilemma mode...but am thinking of choosing one of these really large format tiles from a local retailer (who offers bargain prices on bathroom fixtures and larger cement-look tile): https://goo.gl/photos/3wE9kcS3WPbp9sD18 Mainly, I'm reminded that my original goals for the bathroom were to make it whiter and brighter (maximize the minimal light), more spa-like, with some modern flair/finishes at a reasonable cost, though choosing the "right" tile seems like a decision that will never end until we finally get started on laying things down. Along with trying to choose a finish that a future buyer won't curse me for, the way I did when I saw the red terra cotta on the bathroom floor :P. ____________ I'll keep the thread updated with how things turn out (I really appreciate when others have done the same; it's neat to see people's considerations for why they did what they did and the incredible changes that can be made), just hope the bathroom doesn't turn out ugly (cause then I'll be less inclined to post :P!) Thanks for reading!

I think marble is probably too fancy for your 1940s cape cod, too. Not that you asked. But a modest house like that would never had marble in the bathroom originally.