Looking for blue or green tiles with bullnoses or pencil rounds?
michoumonster
9 months ago
Featured Answer
Sort by:Oldest
Comments (9)
michoumonster
9 months agolast modified: 9 months agoRelated Discussions
What's the best way to intersect 2 marble pencil mouldings?
Comments (15)Will this work with your profile? Let's say your pencil is 1" wide okay? For the piece that butts into the other, cut the end that does the butting at a 45 degree angle from both sides so it ends up as a "point". That end will be 1" wide, but the point, being 45'd from both sides, will only be 1/2" long. For the piece that gets butted into, cut a 45 degree notch into the side of it that is 1" wide but only 1/2" deep, and it'll have a 45 degree angle on both sides. They should fit nicely together, and there should be no lippage issues with the vertical part of the profile. Not the perfect way to describe it, hopefully this "X" and "-" thingy will render well: xxxxxxx xxxxxxx xxxxxxx-------- xxxxxx--------- xxxxx---------- xxxx----------- xxxxx---------- xxxxxx--------- xxxxxxx-------- xxxxxxx xxxxxxx xxxxxxx xxxxxxx...See MoreA question about using bullnose tile
Comments (11)gemcap, it's early morning and my iPhone isn't rendering colors very well, but you get an idea of how the quarter round works at the edges. This shows the detail around the top and window. I think it was sheer luck that the row of subways right under the window ended where it did, so that the quarter round is a perfect fit. Here's the front outer edge. Niche Theres no bullnose at all. I have BN in my kitchen backsplash where it just dies into the wall. But with the thickness of the Kerdi under the tile, the quarter round covers it pretty well. I just wanted a simple tile treatment in my alcove. Too many choices, too many ways design can go wrong, budget. It's all Daltile and I made sure the trim was available before I decided....See MoreIs bull-nose essential?
Comments (17)the other question is how is the drywall getting finished? you have a seam within 1 inch of the glass tile. I'm not a drywall finisher, but if I was I think I would have rather finished the drywall seam prior to tile install. we did something similar in the sense of having a glass strip and trying to figure out what best way to finish it. they did actually make a bullnose piece for my tile. We skipped that and did a 1/2 pencil edge in a marble something or other... basically we bought it at lowes, they came in 12" peices and were polished, not the unfilled travintine look. we were happy. price wasn't great, but it was a nice look, and actually with the pirce of the bullnose, not much more expensive....See MoreBlue Granite Pebble Sheen Looks VERY Green
Comments (14)I am in NE Phoenix/Scottsale, AZ area. The travertine is 12x12 bullnose around the edge of the pool and the rest is 6x12 tumbled pavers. We haven't been on it too much when it is wet, but it hasn't been slippery. I think being tumbled makes it not slippery. The whole process took about 45 days, maybe just slightly more to build the pool. They started Sept 13th and the pebble sheen was installed on Oct 31st. I was impressed with the speed the pool was built. They moved fast and even worked all day on Saturdays. I actually caused about a week delay because I could not decide on the waterline tile. My builder actually had to go to the tile store and pick up a sample of the tile I chose since he didn't have a sample. You can't see it in the picture, but it has some gold/brown it which causes it to slightly sparkle in the sun. I don't remember the stone color, but it was in the gold tone range. Some of the choices had more grays in it. It is individual linear stones and the top is flagstone. My pool builder said the pool probably had some algae in it which is why it was greener than any start up pool he had seen. And it got greener after the first day of fill. It had been in the mid-90's when the pool got filled, so it was hot to have it without chemicals in it....See Moremichoumonster
9 months agolast modified: 9 months agomichoumonster
9 months agomichoumonster
5 months ago
Related Stories
BATHROOM DESIGNPolish Your Bathroom's Look With Wrapped Tile
Corner the market on compliments for your bathroom renovation by paying attention to where the walls meet and the edges round
Full StoryDESIGNER SHOWCASESBlue and Green Make a Splash at San Francisco Decorator Showcase
For the monthlong event, designers have reimagined a 1930 Spanish Revival with delightful colors and striking textures
Full StoryBATHROOM TILE6 Budget Tile Tricks That Deliver a High-End Look
You can get an upscale vibe without spending a fortune
Full StoryBASEMENTSGrassy Greens and Watery Blues Draw Nature Into a New Great Room
A designer gets inspiration from the landscape in this lakeside Minnesota living area and kitchen
Full StoryTILELet’s Talk Tile: An Alphabetical Guide to Tile Terminology
Get set for a tile project with this handy glossary of shapes, materials, finishes and more
Full StoryREMODELING GUIDESThe Perfect Finish for Your Tile
Bullnose? Quarter round? V-cap? Demystify trim terms and finish off your kitchen and bath tile in style
Full StoryBATHROOM DESIGNDip Into a Watery Blue Bathroom
Relax and Refresh in a Soothing Bath of Blue, Turquoise or Aqua
Full StoryCOLORBathed in Color: When to Use Blue in the Bath
Look skyward or to the waters in nature for a soothing, spa-like bathroom
Full StoryREMODELING GUIDESClassic Subway Tiles Go Uptown
Get a polished, high-end look from subway tiles old and new
Full StoryCOLOR10 Reasons to Use Sky Blue
This versatile color can look fresh or timeless, beachy or polished. Check out ways to use sky blue indoors and out
Full Story
Beth H. :