Thank you for responding. Lights will be above mirror and i believe it’s 8ft ceiling. No photo as it’s currently been demolished. i have a rough sketch. The contractor wanted to put up mirrors with clips but I was hoping to find something a little prettier!

Get mirror made to be whatever size you need and I love bath bars above mirrors and never find the mirror too low with an 8' ceiling.

We will have a double vanity with two 36” cabinets with a 24” bank of drawers in the middle.

Are these one connected piece or three separate items? If they're separate, that's a lot to take in visually, and -- if so -- you should keep the mirror and lights very simple /calm to balance out.

We currently have one giant mirror

Why not stick with the one giant mirror? With its larger view, you can see not only your face but also your outfit. It allows you a view of yourself without standing directly in front of it, and it makes the room look larger /brighter. In contrast, separate mirrors -- though trendy at the moment -- will add even more "pieces" to an already complex area. You can bring one large mirror all the way down to the cabinet, eliminating the "break" between counter top and mirror.

The contractor wanted to put up mirrors with clips but I was hoping to find something a little prettier!

Well, he's trying to do the easiest thing so he can finish with you and move on to the next paying customer. What matters more is that the mirror is "framed" -- either with an actual frame or more subtly with a bevel. This isn't a small detail, and it elevates your mirror from builder-basic.

Someone else brought up lighting: I'd go with pendant lights at "eye level" -- this'll give you light at the spot you need it and will eliminate the shadows that come from overhead lighting. But if you stick with the big mirror, definitely put them on a dimmer, as they will be "doubled" in the mirror.

No problem with having a separate light above the mirror -- just put them on separate controls. As we age, more light is more better.

Bringing up one more detail: Consider mounting your faucets on the wall. This will make cleaning easier, as you won't have to clean around them as you wipe the counter top. If you can't do that, at least go with wide-spread faucets, which don't have to be "flossed" while you clean.

I have considered custom mirrors. The contractor said they can make and match white vanity, but I was leaning towards nickel to match fixtures.

The vanity is all one big piece-two sinks and a 24” bank of drawers in the middle.

When I said I’d get my own mirrors, I thought it would be easy!

Seeing the picture, I still lean towards one large mirror.

Our vanity is about same size as yours. It was custom, so we were able to tweak it. Original plan was set up as yours is, sinks to extreme left and right and wider bank of drawers between. We decided to move sinks in toward center and put the smaller banks of drawers on either side. Two tall mirrors with light bars above. Ceilings in our room are 9’ but there are many size options for mirrors. Our mirrors are also set up a bit higher since we used our 9” shower tile as backsplash. They could have been set down lower if we had tiled while wall or used a standard 4” backsplash of the countertop quartz. Here’s how it turned out

Very pretty! I love the tile backsplash. Could I ask what size your mirrors are?

they’re 28x42

we have same mirror in shared bath ( single sink vanity which had more space for mirror) which is 30x48.

Use cardboard or poster board and cut out templates that are identical to the sizes you are considering. Measure out on the wall the height of the vanity, the elevation of your sink counter, the height of the backsplash, etc. Mark those with painters tape on the wall. Then, note the location of the light box above each Sink. TAPE the templates on the wall. See what you think looks best? Do you have your light fixtures yet? Not the “drop” on those if you have the kind that hang down from a rod. Mark it all out. Since you aren’t doing medicine cabinets, the mirrors can be ordered now for later install, or you can wait and do it yourself.

Thanks! I will try that once I can get in there.