crown molding problem
Mark Capone
last year
Featured Answer
Sort by:Oldest
Comments (21)
Stephanie
last yearMark Capone
last yearRelated Discussions
Trusting your instincts . . . or NOT!! Panic-mode
Comments (19)I love the Fred Miller kitchen with several colors (Ithink I counted 4 wood finishes plus a contrasting color range in that one photo just above the gallery sign). Notice how they use different counter heights and cabinet depths to give an unfitted feeling. Notice htat all the yellow pieces have wood trim elements and each color has different molding details, yet they all work together. And the ailses are wide enough to accomodate the changing depths without feeling cramped. Details like that ad the crown changes are what can make the difference betnween pulled together and interesting or just chopped up. You don't have to do all those different things, but you have to consider how the details fit together. My crown is white, but the only section of cabinets with it that isn't white is my blue wall, and I like the way it looks there. The same crown continues around the adjoing rooms as well, so it all flows. I don't think I'd like it if one were painted and the other was stained wood. You may be able to deal with that with the different cabinet heights. I think dark bases and lighter uppers is done more often, but I think I have seen it reversed. I can't think of any to search for to show you though. I like a contrasting island, but as some have pointed out, it has become a big trend lately and may look dated in years to come. If you do the island in a different color, change some of the details -- furniture end panels, feet, open shelves, door details, even your hardware. Mine has raised door panels while my cabinets are all recessed, and the molding has a little more detail. The wood is knotty and glazed while the cabinets are smooth paint with no glaze. The hardware is an old black finish, simple style that a balcksmith could have made while the cabinets have s brushed silver (not sure what it's supposed to be, but it looks softly weathered) in another style with some flourishing details. If your KD is good, they should be able to help you pull these details together. Have you seen photos of mixed finish kithens he has done? That might help you see how he puts things together and whether you like that. If not, search for more photos here and figure out what makes the differences you like. It's YOUR kitchen. Take the time to make it what you love. There is no one size fits all....See MoreCrown molding problem with tall cabinets
Comments (8)Hi mollie, we also have that problem. We've got white molding throughout the downstairs and the kitchen and family room are open to one another. The kitchen cabinets are a cabernet stained birch. After much debate and discussion, we put the white over the windows and the door to the dining room. I am not thrilled with how they look next each other, but I love the dark moldings above the cabinets, and I love the white in the rest of the house. If we put the stained molding everywhere in the kitchen, that would create a strip of dark color that looked kind of odd up there above the door and windows. I think the ideal solution would be to repaint all the moldings a color that goes better with the stained, so that the contrast is not so strong. However, that just starts a domino effect of "issues" with changing wall color, valances, the ceiling color etc. Did not want to go there. Darn these open floor plans, decorating gets more challenging. I have seen others put the stained or darker crown above the windows. In fact the painter thought we should have done it that way. It is really a personal preference. I certainly didn't think about what kitchen cabinets I would eventually have years ago when we chose the white crown molding....See MoreHow can this crown moulding problem be fixed?
Comments (39)I don't think the cabinet maker is at "fault" at all. Everyone is paying for the sins of the original architect here. There a a lot of intersecting planes in that space that don't bring much to the party. Sure , with a lot of forethought he could have had that crown under the soffit there, but, some other part of the design would have been compromised. Who's to say we wouldn't then be discussing if this or that cabinet looks too skinny or Does it look odd for the wall cabinets over the desk to extend underneath the soffit of the adjacent area ? I agree with several here, just leave it alone, it's not really that noticeable. Especially given all the other wall and ceiling intersections going on right there. It'll blend right in after the cabinets are complete and the walls painted....See MoreHow could 11 inch above 30 inch vent hood be finished?
Comments (4)Here are a few options. stainless trim piece. Or:a 5 piece panel to match your doors. You probly don't have the space for that with only 11 inches to ceiling, including a stacked trim. This might look best if it's only few inches: Just a flat piece of painted trim, then run the crown molding straight across. This one is a hair deeper than the top of the hood, probably because the uppers are 13" deep, but yours are 12", so everything should fit slush....See MoreMark Capone
last yearJoseph Corlett, LLC
last yearMark Capone
last yearMark Capone
last yearMark Capone
last yearMark Capone
last yearTaylor's Cabinets & Interiors
last yearMark Capone
last yearmillworkman
last yearGN Builders L.L.C
last yearSarah
last yearelcieg
last yearlast modified: last yearMark Capone
last yearLora B.
last yearGN Builders L.L.C
last yearlast modified: last yearmojavemaria
last yearBobH
last yearMark Capone
last year
Related Stories
REMODELING GUIDESCrown Molding: Is It Right for Your Home?
See how to find the right trim for the height of your ceilings and style of your room
Full StoryKITCHEN DESIGN9 Molding Types to Raise the Bar on Your Kitchen Cabinetry
Customize your kitchen cabinets the affordable way with crown, edge or other kinds of molding
Full StoryREMODELING GUIDESHow to Size Interior Trim for a Finished Look
There's an art to striking an appealing balance of sizes for baseboards, crown moldings and other millwork. An architect shares his secrets
Full StoryREMODELING GUIDESDesign Details: Moldings — or Not?
16 new and unusual ways to trim your doors, floors and ceilings
Full StoryREMODELING GUIDESThe Hidden Problems in Old Houses
Before snatching up an old home, get to know what you’re in for by understanding the potential horrors that lurk below the surface
Full StoryHOUSEKEEPING10 Problems Your House May Be Trying to Show You
Ignore some of these signs and you may end up with major issues. We tell you which are normal and which are cause for concern
Full StoryGREAT HOME PROJECTSHow to Bring Out Your Home’s Character With Trim
New project for a new year: Add moldings and baseboards to enhance architectural style and create visual interest
Full StoryDISASTER PREP & RECOVERYHow to Combat Mold in a Flooded House
Before you rebuild or restore your water-damaged home, take these steps to keep mold at bay
Full StoryDECORATING GUIDESChoose an Unexpected Color for Your Trim
Go Beyond Glossy White Molding for a Room With Distinction
Full Story
millworkman