I struggled with how to run the crown on the wall with my rangehood between two windows. On this thread where I was asking for help, you can see a few different pics of crown and hood treatment. Maybe one of these pics will help. Here's what I ended up doing. No crown. I will, when I pick tile, run it eurosplash style on the whole hood wall. Here is a link that might be useful: Pics of hood-crown treatment

Thank you all so much for your very kind comments and for all of the "cheerleading" you've done for me! I appreciate the advice and encouragement more than you can possibly know. Covingtoncat - you asked about the lack of venting over our stove ... well, it's a problem! DH is the "chef" at our house and he tends to be a messy one. I'm sure there's gunk on the wall behind the stove (although maybe I'm lucky that my eyesight is poor so I don't readily see it!) -- the pot rack (not vintage, but it did come with the house - left by the previous owner) gets coated with greasy ick and needs frequent cleaning. I do wonder how the now-red wall will show up the gunk once I paint it white, but I still intend to do so. And maybe convince DH to be a little less splatter-prone when he cooks! Onedogedie - yes, the new window is upstairs, on the far right. (That's actually an attic vent on the side closest to the camera.) I still haven't been able to locate anyone who does vintage-style awnings in my area yet. Lots of companies do canvas or copper - but that's not what I have in mind. So - still keeping my eyes open and pondering that addition. I have now begun painting the lower cabinets white, and will change all of the red in the space to white. DH has remarked several times that even with the small amount I've painted so far, the room feels so much larger and open. I have to agree! I've given myself until the end of the summer to get this project completed, although I hope it doesn't take me that long. I'll post another photo update once all of the cabinets are finished.

Like Jamies, I posted about this when I was at that point in my reno. I thought the beauty of my hood would be diminished, but didn't know what to do with my crown. A complicating factor for me were the flanking windows. In the end, I let the crown die into the wall at the upper cabs near the hood. Hood speaks for itself this way. I think hoods done like this look awesome! If you really start to look around, you'll see this a lot. Another option is to do what Thynes did (don't have a pic handy) in her/his kitchen, which is to run the crown around and over the hood where it meets the ceiling.

First of all, I appreciate all of the sweet comments regarding my husbands work. This has been SUCH a labor of love. We have been in this house for 2 years with disgusting, original 70s cabinets and NO DOORS. I did not even store anything in the cabs, because they were so gross. I fashioned some pitiful "curtains" (basically panels of material velcroed to the openings) to cover the nasty looking innards of the cabs. We priced cabinets and got depressed. Some basic, china made cabs at Panda would have been minimum 12k. My husband has a woodworking shop in the upstairs area of his warehouse/office. He is great at making simple furniture and things. At first, he was going to make the boxes and we would buy the doors. Well, even THAT was expensive. I don't care for fine jewelry, we do not take exotic trips, I am not a "shopper" and I am not into fashion. However, I have always wanted and deserved a dream kitchen. My husband wanted to make sure it happened. We absolutely LOVE our house and plan to be here a long long time. We own a small business and he works 6 days a week. He started planning, measuring etc probably a year ago. We kept tweaking, and he started cutting and making cabinets, a little at a time. I saw nothing of this work, he would come home and tell me he was excited for the kitchen but to me it still didn't seem real. There are a few "flaws" that might not be fixable, but because they are small and also because they are from my husband's hands, I do not mind them at all. I can't wait to show you the interior of the cabs, and all the bells and whistles in this kitchen. That will have to wait, though! The pictures are dark because my kitchen is dark. I hate not having a window. We may add one of those "solatube" things eventually...I found out about them on the home decor forum here on GW. Hubby is adding some hi hats in the kitchen, plus we will have a light fixure over the peninsula (which is barely visible in the picture...it is jutting out at the bottom right.) We are getting a island hood vent (which I will start another thread about eventually, I am overwhelmed) and I am bummed because it is going to cause some of that "openess" to disappear, but I *need* an island hood vent! We are going to cover the gaps below and above the dbl wall oven. We are putting a curtain under the SS farmhouse sink, to hide all those cleaning products you see. Haven't decided the color or look just yet. Yes, that is a wood trim where the countertops meet the wall. My husband is going to stain it the same color as the countertops. You see...the counters...they are PLYWOOD! yes, PLYWOOD! We are eventually doing butcher block on the perimeter, and something different on the island (haven't decided yet) but the plywood looks so darn good, I told him let's just keep it until it falls apart! He rounded the corners and put a band on the edges, also. So, the wood trim you see, the backsplash will stop there for now and when the permanent countertops come in, he will finish the backsplash. We had discussed some sort of trim on the lower part of the cabs, but he got some undermount lights to put under the cabs that will not show at all, so we decided to skip it. Now I am wondering if maybe we should go ahead and do it. I am glad to see everyone was in agreement about needing something at the top of the cabs! I want to add that the ceiling is REALLY uneven so that is why you see such variations in the cab heights. I am worried that is going to make doing a trim even more difficult. My hubby curses the builder of this home every time he tries to do something to the house. He is sure he was an alcoholic, and says if he ran into him on the street he would punch him! lol. Walls are uneven, floors uneven, ceiling uneven, pitiful rigging of electricity, plumbing...you name it! As far as the help in posting pics...THANK YOU for taking the time to type that out and/or provide helpful links. I know how time consuming it is to explain these things (heck, I have already been typing this post WAYYYY too long, lol) so I appreciate the help. I think the problem is in the resizing, not the posting. Maybe it is indeed the picture quality as a few of you have suggested. When I see the pic in photobucket, it looks crisp and in focus, but when I try to resize it, it gets blurry. I will keep trying! Oh, and I do use a digital camera, a canon elph 7.1 megapixels purchased several years ago so I will see if that is the problem. thank you buehl, biochem, suzanne and htracey for the picture help! hollysprings-I will mention those terms and your suggestion to my hubby. Yes, def agree that undercab lighting is a must! still need our glass insert in the door of the corner cab...and shelves, also. Have 2 other cabs that have interior lights across from the island, not visable in this pic. But all cabs will have under cab lighting, for sure! And they will be on dimmer switches! kitchenkelly-thanks for the picture. Of course I need something smaller, but that look is very pretty! suzannel-my husband said if he knew how much work these cabs were going to be, he would have never been able to psyche himself up for the job! He also said he does not want to brag, but he even impressed himself! LOL! lascatx-I remember seeing that kitchen! Love it. I am not crazy about those tiles, but def considered something more "spanishy". BTW, my grandfather was born in Spain, and my husband is of Cuban descent so we do feel like we want to play up the spanish flair in our home. htracey-I *love* molding in general, but in this house, I wanted to stay away from it. Mainly because I grew up in a florida ranch home in the 1970s...and so did all of my friends, and I NEVER saw decorative molding EVER. I am trying to stay somewhat "true" to the era this house was built in. It's one of the reasons I don't want granite counters. I know might sound like a joke to some, not like this is a historic home from the 1800s or anything, lol. However, I have a "thing" for the 1970s...I just can't explain it! Of course, no one I knew had a double oven, or SS appliances for that matter. The other thing about crown molding is the ceilings are SOOOOO uneven it would be a nightmare for DH to install. So, in general I am NOT a molding fan (again, FOR THIS HOUSE) but I do see now that everyone agrees I need molding in this situation! Thank you again for your help. lynn, singingmicki, cmm and green-thank you for your input! And yes, I am definitely thinking something shimmery for the backplash. I don't think I want subway tiles, tho. Or glass. Maybe something mother of pearlish? Ok, I really like this...saw it at Home Depot and loved the sample, but after doing research, I am scared the product that gets shipped to me will not look like the sample. I know this is a marble and not sure how "70s" marble is...but I think it LOOKS very 70s. The 6x6 tile at HD was tubled and had a rough texture, which I really liked. here is *kind of* the antique mirror look that I like. Let's see if those S.O.B.s post, dang it! Ok, thanks again, everyone. I have neglected my family for far too long this afternoon, but I am so grateful for all the help, I need it!