This is not the best picture but maybe it will give you some ideas. We have doors on our built in that open and slide back in the shelf. The ceiling is 18.6 feet high and the built ins are between 8-9 feet tall. HTH

We're using our Samsung microhood on a little rolling kitchen cart in our apt. now while we're building our house. It's sitting on a towel to prevent scratching. No problems--it's just big and ugly! Oh, and the door is a little hard to open since you can't really just pull it open (the unit isn't bolted in place).

Hello LoLauren-Hope you post photos of the finished project!I love a fireplace flanked by bookcases also.Beveled glass cabinets in a simple design would be gorgeous, but if you are trying to hide stored items then you could do wood cabinet doors with a darker antiqued glaze for interest as you have alot of wood. You didn't mention what your style is -white painted wood, rustic, traditional? Pamelak

sageviews... short answer is I have no idea. Longer answer: I'm not familiar with Kitchenaid built-in models, so I can't say for sure, but... It's not so much the depth with a built-in, or the space you allow beside it, as it is the hinges on the refrigerator door. While you could leave a 1/2" clearance all the way around (and please don't let anyone tell you that looks bad, many current refrigerators require that space, and lots of people have them and it sure doesn't bother them) - your doors may still jut out a bit. Depending where you live and your personal tastes, this might be perfectly fine, or it might not suit you. Sub Zero realized a while back that integrated (flush with cabinetry) was becoming popular, so their built-ins, which are not true integrated, had hinges that operated in such a way that the door does not need to extend beyond the cabinetry beside it to open completely. Thus, if someone had the depth and space, they could install the SZ built-ins very similar to an integrated... flush with the cabinetry. I don't think Kitchenaid did this with their built-in hinges. You'd really have to go look at them, and inquire. The easiest way to tell is to take a piece of flat wood (a 1 x 8 or a small piece of plywood - or even a stiff notepad), hold it just beside the door - flush, and open the door the way. Does it hit the wood? If yes, you can't flush install. Is that horrible? If one really wants panels but can't find integrated or it's beyond the remodel budget, no, I don't think so. Just my opinion. It's kind of hard for me to explain the difference in hinges, but the SZ's allow the door to open in place, it does not need side-room. I can't tell by looking at Kitchenaide's site, but I'm pretty sure they require a non-flush install. Basically, the difference is this: SZ built in flush inset: kitchenaide built in flush inset: Hope whatever you decide, you are happy with it : )