*edit* Installing a new wood burner, what do we do around it?
Sammi Vance
2 years ago
last modified: 2 years ago
Featured Answer
Sort by:Oldest
Comments (13)
Sharon Fullen
2 years agoSammi Vance
2 years agoRelated Discussions
What Do You Think? - New Capital Open Burner Range
Comments (150)Dr Jo Black knobs (similar to most other ranges) are not an up charge they are simply not available..... The Grey knobs are standard on the Culinarian range as per most pictures on the Culinarian website, but you can change to the red ones at no cost should you wish. I don't think any of the pictures are a true reflection of the real color of the Red /Cabernet / Maroon knobs. I don't think that Capital are trying to promote themselves as a "Bespoke" company, and I hope I have not painted them as such. They are however trying to accommodate SOME of the wishes of the Garden Web Posters which is a good thing. If they tried to accommodate everyone the spec book would be huge and unaffordable. Anytime anyone asks for something different companies charge for that change, be it Bluestar, Wolf or anyone else....See MoreSetting up new thinkpad - what to do, install, uninstall -
Comments (17)Colin - your explanations of restore, system restore, back up, etc were very helpful. They were a very useful edition to what Ravencajun wrote - it didn't seem repetitive to me. I think I can really use any reiteration at this point. Now I actually understand that the system can be backed up to a hidden spot on the hard drive as well as my backing it up on dvd - to be used in the event that the hard drive back up doesn't work. By George, I think I've got it...........Well - at least that part. I'm not sure that I saw any option to create a back up start-up disk. Was that automatically included when I backed up the entire hard drive - or is there a separate step I should take? I also realize that I hadn't understood what you meant by blue button. I was looking at an actual blue button the thinkpad keyboard. Will that button do - or should I be looking for something else. I didn't not notice any blue buttons on the screen (except the Avast buttons in the task bar). Raven - I have a question about revo uninstaller. What would it uninstall? I noticed that I have Office on my computer but I don't know if it came with Office - or if this is a trial program. Is there a way I can figure that out? If it's a trial, I'd like to remove it. If it's permanent, I'll keep it. I know I did not get Microsoft Word with this and thought I had chosen no office software. I was planning on getting open office for the few times I might need to work on a word document (working on a document that is in Word on my desktop). Zep - good point about the printer software. I know when I chose the Canon mx850 and was researching printers, these were considered much better in terms of minimal bloatware (than say the HP's). I know when I installed the software on my desktop (and my daughter's) that several files were installed, but I think I want them all. The computer is networked so I can scan documents to any of our computers - print from any computer, fax from any computer, etc. I'm not sure how I would determine if any of those canon files are bloatware. More on my progress: -I did do all the lenovo updates. -ran javara and updated java and removed old programs. -installed and ran malwarebytes, spywareblaster. Any particular settings I should choose for spywareblaster,malwarebytes or Avast? I have so far just chosen the defaults - but don't know if I should "protect?" cookies - or anything else. And I just realized that I forgot to install superantispyware. For Avast, I did not set up scans on the screensaver - because at this point I will be turning the computer off if it is not being used for a while. If I just happen to walk away for 20 minutes or so, I don't want a scan automatically running that I have to wait to finish - or interrupt and cancel it - and run it manually later. Does it seem okay to just run it manually? If so, how often? Maybe I should use the screensaver option? I think "protecting (I know that's the wrong word - unselecting ?) cookies was for ccleaner - not anti-spyware programs. Somebody please correct me if I'm wrong. So now I'm off to get superantispyware - run secunia and get any necessary updates - and set up the printer software. This is extremely gratifying to be able to do this (with everyone's help). It really helps me to understand what's going on with my computer. Thanks. Lynn. PS - if I get open office, is there anyplace in particular I should download it from? Are there parts to download and parts to avoid - or do I just download the whole program?...See MoreInstalling a light fixture - what should we do with ground wire?
Comments (2)Is the box metal? Is AC cable(Armor Clad, often incorrectly called 'BX') present? Use a volt meter to test of the box os grounded (hot to box should be ~120 V). If the box is metal and grounded there should be a tapped hole in the box you can put a ground screw into (10-32). If there is no ground in the box just put a wire nut on the ground to the fixture and tuck it in the box....See MoreHelp! Bad cabinet installation - what can/should we do?
Comments (45)@jellytoast and others who point out that basically I’m not qualified to act as my own GC and am not saving money by trying to do so: There’s truth to that. Ultimately I’m responsible for not verifying the install was plumb and square, and you have a valid point. I knew the installation itself was critical, and I knew the cabinets need to be square. I totally dropped the ball on verifying that they were. On the other hand, as Sammy pointed out, some GC’s are no better than what I wound up with. This could have ended up a non-issue, or the same way – or even worse. In any event we’re dependent on (1) our own knowledge + information from the GC or (2) our own knowledge + information from the installers/tradesmen. When we bought the house 2 years ago we hired a GC to install hardwood floors (in ½ the house) and to handle what was going to be a much larger kitchen remodel (bump into the garage and tear down another wall instead of keeping the same footprint). It was a really bad experience. First, we paid a premium for sub-par hardwood floor install/finish. Had I learned more on my own about HW floor install and finishes rather than relying on information from the GC and his sub we would have done the floors differently. It was a disappointing and costly mistake. I learned there are risks with a GC as well as without a GC, and that hiring a GC doesn’t guarantee desired results. We did get a bid from another GC to handle the scaled-down kitchen redo this year. Ultimately we weighed the risks vs costs in either scenario (GC vs no GC) and decided to GC ourselves. This isn’t the right decision for everyone, but I still believe it was the right decision for us despite the situation we’re dealing with. The KD came out yesterday along with one of the original installers and an install project manager. The project manager recommended tearing out the counter that has ½” shim, and install the cabinets correctly. Also tear out the crown moulding where it’s bad/ugly and re-do. All doors that have cosmetic imperfections will be replaced. At this point we are satisfied with the proposed solution, although it’s certainly not over. I can’t say how much I appreciate all your comments and help! Thank you!!...See MoreSharon Fullen
2 years agovinmarks
2 years agoAngel 18432
2 years agoSammi Vance
2 years agolast modified: 2 years agoacm
2 years agoSammie J
2 years agoJoseph Corlett, LLC
2 years agoAngel 18432
2 years agovinmarks
2 years agojrb451
2 years ago
Related Stories
FENCES AND GATESHow to Install a Wood Fence
Gain privacy and separate areas with one of the most economical fencing choices: stained, painted or untreated wood
Full StoryPATIOSSpring Patio Fix-Ups: Install an Outdoor Fireplace or Fire Pit
Make your yard the place to be by adding a fire feature that draws a crowd
Full StoryTILE6 Questions to Answer Before You Install Tile Flooring
Considering these things before tackling your floors can get you a better result
Full StoryFIREPLACESPhoto Flip: 40 Wood-Burning Stoves to Set Your Heart Aflame
A collection of stylish stoves warm up contemporary, traditional and eclectic spaces from around the globe
Full StoryREMODELING GUIDESWhen to Use Engineered Wood Floors
See why an engineered wood floor could be your best choice (and no one will know but you)
Full StoryKITCHEN OF THE WEEKKitchen of the Week: White and Wood Perk Up a Chef’s Space
New cabinets, top-end appliances and a rustic-meets-classic style mark a sunny San Diego home
Full StoryWOODKnotty and Nice: Highly Textured Wood Has a Modern Revival
Whether it's cedar, fir or pine, if a wood has a knot, it's hot
Full StoryLIVING ROOMSHow to Convert Your Wood-Burning Fireplace
Learn about inserts and other options for switching your fireplace from wood to gas or electric
Full StoryARCHITECTUREGet a Perfectly Built Home the First Time Around
Yes, you can have a new build you’ll love right off the bat. Consider learning about yourself a bonus
Full StoryLANDSCAPE TRENDSStock Tank Style: The Garden and Patio Edition
Galvanized-metal water troughs bring hardworking style to patios, plantings, fountains and ponds
Full Story
tangerinedoor