Have you looked at BM Simply White? Several posters here have used it on their kitchen cabinets over the years. All my trim and celings are painted Simply White.

Has anyone installed Cristallo Tiffany their kitchen and what cleaning products do you use? I just installed huge amounts of it, very expensive and I want to make sure it always looks good.

I don't think the slab is too modern (meaning it can go in many different style directions), but I understand about the grain. You will need them professionally painted in order to get rid of the grain. You could go white, light taupe/grey/griege, soft green, blue or navy or even charcoal/ black. Depends on the overall look you are going for. Look through some photos to get a better idea of the look and feel you want for the kitchen when finished. Good luck!

You can't use the Elkay ELXUFP362010PAO to which you linked becaust it has a full apron and requires a cabinet that accommodates a full apron sink. If you're not getting new cabinets, you'll have to use theElkay ELXUFP3620PAO to get the Parchment color you want. It's easily converted to a workstation sink by having your top fabricator leave a 1/2" rear reveal and having your handyman rabbet a cutting board which is much easier than having him alter your cabinet doors to be able to use the full apron sink. The Elkay ELXFDB3620BGRTO is a possible short apron workstation alternative, however, you'll have to get it in Ricotta which is bright white. Either sink is 36", so your refacer is going to have to leave you a left and a right side dummy drawer to butt to the apron and cover the remaining 6 " or so. It will look fine. I'd get the 3cm. "Is there an advantage to using an apron front and single bowl versus an undermount & double bowl?" Yes. An apron front sink can help greatly with seam placement and veining/movement matching because the only place the slabs touch is in the rear, mostly out of sight and the seam is half covered by the faucet and splash. 98% of my sink replacement customers go from a double full divide to a single bowl. 1% get low divides and 1% fully divided replacements. "Also should we try for a sink deck? Sink cabinets are 48 inches wide. 25 inches deep. We would like a large sink." If you want a 48" sink with an apron that fits perfectly without door alteration and has a faucet deck, you'll have to go custom stainless steel for 4K or so: Bars in islands are out of style right now. It isn't the difference in fabrication costs as much as it is in reworking the electrical, cabinet and wall alterations, etc. No matter what quartzite you choose, make your fabricator take you to the homes of jobs he's already done so you can verify he knows the properties of the stones he sells so bleeding adhesives and other catastrophies aren't an issue.