no matching bullnose tile
I ordered Artmore Tile Nassau sky from Lowe’s to use on my shower walls and ceiling.. unfortunately I didn’t check to see if there was bullnose available for it, and there isn’t. Home Depot had what looked like bullnose that would match it very well, however they are currently out of stock, including online. I could use suggestions of what tile would look good to use for edging the shower walls as well as shelf cut outs. Not sure if I want to try to find a similar blue, or go a white or gray route.
https://www.lowes.com/pd/Unbranded-Nassau-Sky-2-in-x-8-in-Satin-Ceramic-Wall-Tile-Sample/5001553915
TIA for suggestions and ideas
Attached is the link to the tile we have and what the shower looks like as we wait to put up the Artmore Tile.
Comments (9)
Related Discussions
Transition from tiled ceiling over shower to painted ceiling
Comments (3)We removed the soffits in two bathrooms, and we tiled the ceilings over the tubs in both, too. In one we used matching bullnose tile as our border, or trim, in the other, our tile guy cut down marble tile/pieces to use as border/trim. The rest of the bathrooms/ceilings are painted (except over the vanities). It looks great, but I don't have any pics showing the ceilings in either bathroom. If I get a chance, I'll try to take some pics for you....See Morelarge format floor tile on walls?
Comments (23)Lori: I can't take the credit for the work. We found a good tilesetter who is doing the installation. It's the first time he's worked with Schluter profiles on the tile edges. He indicated that it's a bit tricky to get the Jolly to be perfectly plumb because it tends to want to move around. Otherwise, a straightforward installation. The Schluter profiles are not expensive (in my opinion). An 8' length is $15 from Home Depot. The Schluter designline horizontal profile between tiles is about the same price, but it was special order from a tile shop. The quote I received for professionally bullnosing our porcelain tile was around $8/linear foot....See MoreHow to end edges of backsplash . . . without bullnose tile . . .
Comments (23)I have a white/gray stone tile and it's thicker than a typical subway tile. Tonight at Home Depot I put a Schluter brushed metal tile edge against it and was surprisingly pleased with the result. Even though it's a vintage (1920's) style kitchen, it works with some of the modern elements like the stainless steel fridge and lighting fixture....See MoreOrdering tile online?
Comments (2)Bad idea. What is their return policy? If you need some replaced will they match the color lot and batch numbers ? Will all the tiles sent the first time be of the same lot? How flat are these tiles? Can't tell that without seeing 2 full pieces in person....See More
PROPatricia Colwell Consulting
2 years agoLaurie
2 years ago
PROBeverlyFLADeziner
2 years agolast modified: 2 years agoUse the Schlueter edge as you see below. You can order it in a variety of colors and finishes.
https://www.lowes.com/pd/Nassau-38-Pack-Sky-Ceramic-Common-Actual-8-in-x-2-in/5001251311
bry911
2 years agoLauren Nicole
2 years agoLauren Nicole
2 years ago
millworkman