I hear or notice the noise way less now, but still hear it from time to time when walking over an area for the first time. We have a couple of seams that have a small gap forming. As others have pointed out and i have come to learn, the problems that we have with the floors are caused by the unevern (not flat) subfloor. So, from that perspective, i cant blame flooret. However, most people that are buying these vinyl floors are doing so for the advertised ”value” and installing them in extisting homes. When you consider the time and expense to make old subfloors PERFECTLY flat, they are no longer a good value. That is my biggest complaint at this point; they drastically under communicate the amount of time and money required to achieve the desired outcome. To those of you who installed these Flooret floors, im sorry and hang in there. The noise and /or your attention to it will improve greatly over time.

Thought I would also update this thread since it popped back up. We moved into our new build 2 months ago and ended up choosing engineered wood for most of the house, except the mudroom, laundry room and their connecting long back hallway, which got tile. I can close this area off and the dogs stay here if we are gone for several hours. Their food and water is also kept in the laundry room. The floors are Duchateau - Riverstone collection - Sava color. So far they have not shown any scratches from the dogs making the crazy run to the front door when they hear the doorbell and/or fedex! The floors have a rustic look and slight texture that will make it easier to hide any scratches and dents.

I have the Home Depot Lifeproof LPV being put down now. It is a beautiful chevron design in light color wood grain. We are half way though and I want to rip it out. It looks gorgeous and that is the only good thing. The fake wood grooves hold dust and grit. I vacuumed, swept, swiffered mopped and mopped again and finally on hands and knees washed and dried the floor and if you run a hand over it there is still dust and grit. Also, I kept hearing about the good sound quality in a room compared to other hard floors and that it was not as cold as tile. BS on that too. I gave the installers a day off on a Friday hoping I would feel better about it in a few days. Nope. I feel like a fool. I spent almost $10,000 and even though it is gorgeous, I hate how cold it is and the grit just will not go away. I am in such a quandary. It was very difficult to prep the house for the installation. While it would be financially foolish, it may be better to ditch it now. Very said here in Colorado.

The only thing I can say is try to get as close to 3/4" thick with the thickest wear layer possible (as close to 6mm as possible...nothing less than 3mm). The narrow strip engineered will get you something....but less than $5/sf is risky business. You would do MUCH better with a HIGH END European Laminate for $5/sf than you would a bottom of the barrel engineered hardwood for the same price. And after that, you want to increase your budget. If you can't do that...then do what you think is best for your situation. I would prefer a high end laminate over a cheap-cheap engineered hardwood.