Personally I think that approach is getting the cart before the horse and could present some legal problems. In the normal course of events the tub is installed before the wallboard goes in and the finished floor material is generally one of the last steps of the project. If you install the floor before installing the tub you are confronted with two very serious legal matters, The Law of Gravity and Murphy's Law. From the moment the flooring is put down the Law of Gravity dictates that anything that gets dropped will ultimately land on your new flooring material and Murphy's Law dictates if something can go wrong it will go wrong, ergo cracked tiles or marble, torn vinyl, permanent stains etc and even if you do put the floor down first you must still caulk the joint where the tub meets the floor or water would seep under that edge and form mold under the tub.

Window warranties aggravate me about as much as faucet warranties, which are only slightly less annoying than setting my hair on fire with kerosene and putting it out with a brick. I don't know of a single window manufacturer that really stands behind its product. Almost all claim to have life-time warranties, but if you read the warranty, they actually promise very little. At most they will, eventually, send you a replacement part, but actually getting the window fixed is up to you. Not to be impolite, but this is crap. The window fogged up because it was not manufactured properly. There is no other explanation for fogging of an unbroken window. The homeowner did nothing to cause the problem. It is entirely on the manufacturer, who, if he was actually standing behind his product would also pay for the labor to install the window. I am not at all impressed with the fact that a window company makes a video showing the homeowner how to install replacement glass. Why should the homeowner have to install it? He didn't cause the problem. If we install windows for a customer, and they have manufacturing problems, we take care of the problem. We deal with the manufacturer, we install the replacement parts. And we keep track of our time and costs and bill the manufacture for them. If they have not paid in 90 days, we sue. Most people are not ware that the manufacturer's written warranty is not the only warranty a homeowner has. By law the manufacturer warrants the windows to be merchantable, workmanlike, and fit for the purpose for which intended. If the manufacturer violates these warranties by, for example, providing a dual-glazed window with seals that leak so the window fogs up (not merchantable, not workmanlike), he has to pay for the parts AND the labor to install the parts. That is the law, and has been the law for over 100 years. Manufacturers' warranties are not written for the purpose of protecting the customer, they are written to avoid, as much as possible, their duties under these common law warranties. The effort is only effective if the customer lets the manufacturer get away with it. We never do, and we never lose. My suggestion for homeowner is not to deal with warranty issues themselves. Get the company who installed the windows to deal with it. You may have to pay them to take care of manufacturing problems (but not installation problems -- that's on them). That way you avoid the finger-pointing that is common in window warranty claims. The manufacture says its an installation problem, the installer says its a manufacturing problem and no one does anything. Take pictures, get invoices, keep close track of your costs. Add them up and bill the manufacture. The company will probably deny their liability since labor is not covered by their written warranty. Don't spend any time trying to explain your rights under common law warranty -- just sue in small claims court. The judge will provide all the explanations necessary. At $15-45 to file a small claim, it is one of the best judicial bargains around. Keep in mind also that most window companies are members of the Better Business Bureau and as members have to submit to binding arbitration if your ask for it. Ask for it. Let the BBB collect for you. Stop taking crap from manufacturers over warranty issues. Regards,

Hi Sooz -- I happen to love the kind of tile you had; I grew up in a 30s house with strongly-colored tiles in that pattern carried around the room. So while there are many, many options out there I sure wouldn't rule out a variation on the theme. One thing re your window -- have you really checked to make sure there's no rot around the window or into the walls? Because now would certainly be time to replace things. We're wrapping up our bath reno so I do have some photos of what we did plus a few inspiration photos I can share -- none are exactly what you're looking for but some have the elements you mentioned. If you're committed to just keeping the tile in the shower/tub area vs carrying it around the room, I think keeping things simple is probably best. Simple can be serene and gorgeous! Good luck with your project! 6x6 Tile on the diagonal (inspiration pic) Think this is 4x4 field, with grout blending in (inspiration pic) Contrasting grout (inspiration pic) More rustic approach to grid, with wide grout lines (insp. pic) Know it's tough to see -- white 4x4 grid, window (insp. pic) ********** My bath, Before shot (ceiling dropped to 6' over last 1/3 of tub) My almost-done bath (1905 house), done in DalTile's pale yellow 6x6 in a running bond vs grid pattern My bath, window area -- we removed double-hung and did a tiled-in aluminum below, awning window above

Is there missing grout on the floor? Regrout, assuming the shower doesn't leak. Those mosaics have really good slip resistance. Quaternary disinfectants for the mold. Give it time. Repeat every couple of weeks. May need to re-caulk. But if the caulk is in good shape, the disinfectant may clean it up good enough. If not, then dig out the old caulk, disinfect, let dry, re-caulk.