Blanco Silgranit Sinks - yay or nay?
3 years ago
last modified: 3 years ago
Featured Answer
Sort by:Oldest
Comments (9)
- 3 years agolast modified: 3 years ago
Related Discussions
My New White Silgranite Sink
Comments (14)@dibbs: I don't know if there's such a thing as a sink that's too big, but a sink can definitely be too deep, depending on what kinds of tasks you'll be using it for. Will this be a cleaning sink as well as prep sink? In order to avoid leaning in and over as much as possible, two dimensions are important to get right: 1 - the sink needs to be placed as close as possible to the front edge of the counter (i.e., close to you). This is the one real functional advantage of an apron design. For under and overmount sinks, it's still worth getting clear with the counter and cabinet and plumbing people ahead of time what the minimum distance with your setup can be, and going with that. 2 - the base of the sink needs to be high enough that pots and pans resting on it don't force you to lean over much to wash them. A grid in the base of the sink can help, moving things an inch closer. The sink base can also be moved closer by overmounting the sink, and/or by raising the overall height of the counter. But you put yourself behind before you start with a ten-inch-deep sink, and the effect is worse if it's undermounted to a thick counter. The sink is the most-used appliance in the kitchen. It's worth taking the time to make sure it will be as comfortable as possible for the kinds of work you'll be doing at it....See MoreSoapstone selected...now sink & faucet
Comments (11)The Kohler faucet we have currently is TERRIBLE and therefore we would never buy a Kohler again. We have noticed pull-down faucets dangling in the showrooms - and they've never even had water flowing through them. We've heard that side sprayers leak. And pull-out faucets don't have the look we like. We're willing to pay a few hundred dollars for something we like and that has a good warranty. Oil-Rubbed Bronze is the finish on my cabinet pulls. I had considered the Grohe Bridgeford in Oil Rubbed Bronze (33 870) until I read igarvin's experience with a dangling sprayer in the "Regrets" thread here. My husband wants only ONE hole drilled in the soapstone. That also means he wants me to find an alternate solution to the dishwasher's air gap. So...what I'm questing for is a "cottage" or "farmhouse" looking spray faucet that's many years old and hasn't leaked, dangled, or become unusable due to hard water deposits. Oh, and it will have to be able to be mounted on a deck 2" thick because we'll have 3cm soapstone over plywood. It's easier to find faucets that have a cottage-y design without a sprayer. I may have to consider another finish - perhaps nickel - that could work with my color scheme but a KWC stainless faucet (which all have modern lines) would look out of place. It would be nice it it didn't cost an arm and a leg and that actually worked. The Kohler let us down so we're severely gun-shy when it comes to faucet selection!...See Moregranite choice - help me with sink please!
Comments (12)Thanks everyone - I think I'll go with the gray. cpang74 - the name of the granite is New Aran Blue. My stone fabricator says it's a "new" stone. Not sure what that means really but it's true I haven't seen it on a lot of websites. It's got a lot of the crystal like stuff that Azul Aran has but it's less than half the cost of that AND it fits my color scheme better - grays and browns vs. blue. sue_ct Thanks - I didn't realize that but it's ok. I just love it and I've been able to rationalize to myself that it's ok to pay over $600 for a faucet - and hey I just saved another $65 by changing my sink :)))) BTW you all are great. I've really been able to post only inquiries here as opposed to helping anyone. I have learned SO MUCH!!! So thanks and I'll definitely posting more questions and hopefully post some things that will help other people. Tracy...See MoreBlanco Silgranit sink choices. Help!
Comments (5)I ordered the blanco silgranit 1 3/4 (one side slightly smaller than the larger size) in biscuit. The biscuit looked good with my granite choice. It goes in tomorrow! Yay, no more running out to the garage to stroke my sink! I got the sink grids for both sides, and the custom cutting board. Since they were shipping the sink free I thought I'd let the accessories piggy back because I thought I'd eventually get them anyways! Lots of people mentioned that they like the grids so their dishes can drain and it also discourages chipping (of the sink). I am probably more excited about getting the new sink over the granite. I have a one-sink kitchen so I am definitely sold on this one. It is the first sink I have ever picked out. Good luck on your decision....See More- 3 years ago
- 3 years ago
- 3 years ago
- 3 years ago
- 3 years ago
- 3 years ago
- 3 years ago
Related Stories
MOST POPULARHow to Choose the Right Kitchen Sink
Learn about basin configurations, sink shapes, materials and even accessories and specialty sinks
Full StoryMOST POPULAR8 Little Remodeling Touches That Make a Big Difference
Make your life easier while making your home nicer, with these design details you'll really appreciate
Full StoryHOUZZ CALLShow Us the Best Kitchen in the Land
The Hardworking Home: We want to see why the kitchen is the heart of the home
Full StoryKITCHEN CABINETSNew This Week: 3 Kitchens With Beautiful Midtone Wood Cabinets
Warm woods complement a variety of other materials to create rooms full of character
Full Story
jupidupi