It is difficult for myriad reasons. One is that no one publishes data for pressure loss through their hoods, which is needed for calculation of what cfm one will really get from a given fan. Another is that significant searching is needed to find out the characteristics of the rising effluent so a valid rule of thumb can be established. A third is how high one is willing to raise his debt limit. A fourth is aesthetics versus function. And don't forget make up air. kas

I searched on aj madison on the kitchenaid and it was $5019 and i found i got better prices with my local appliance dealer for my appliances. You might shop around more on the kitchenaid. The wolf you will have a harder time shopping it around as it is set pricing. On splattering we use an old fashioned splatter guard and that works great to reduce cleanup. You pay extra for wolf for the reputation, cache, and service. It might be worth it on resale. On aj madison websiteyou can do a comparison of the specs on each and see the differences.

If you check the Appliances forum, you'll find tons of hood and Wolf range info. A lot also depends on your cooking style and whether you are trying to retrofit or whether this is a brand new kitchen with unlimited options for venting.

@r, I thought I would chime in here to just say that I don’t think you are “obsessing“ at all regarding the use of knobs in this case. One of the most crucial variables in any kind of industrial design is the way we interface or interact with whatever the product is. Most of us utilize capacitive touch controls or infrared type touch controls on a constant basis with everything from iPads, smart phones, as well as any number of house appliances. But I would suggest that your instinct regarding cooktop or rangetop controls makes a lot of sense. Consider the difference in using a wall oven versus a cooktop. Most cooks in the kitchen can get the opportunity to wipe their hands in order to use touch capacitive controls on a wall oven. Of course, the case could be made that turning a simple dial, can be more intuitive, then going through a series of menus to get to where you want to go, since in the end, the mission of the wall oven has not really changed very much since our grandparents time which is essentially to bake the cake or roast the chicken. The reason I suspect that cook tops and range tops, as well as ranges are a particularly good candidate for knobs is due to the fact that the controls are often placed on a horizontal plane. Many people, especially those who are new to induction appliances for example, have learned a hard lesson as the very sensitive touch controls do not always take kindly to steam, water, droplets, and oil or gravy splatters. It is not hard to imagine why this is problematic because if you put any of these liquids on top of your smart phone screen, you would discover that the touch controls that works so beautifully such as the ones I’m using right now on my iPhone to create this post do not take kindly to having these substances on top of them. There are lots of examples of folks who have touch capacitive controls on these horizontal locations where the entire appliance is either shut down or thrown off its game. Of course, the majority of modern products that have knobs do not use the analog/mechanical controls of knobs of the past, but are in fact, “knobs“ that interface with micro control boards behind them. Still, there is an entire field of design that studies user interaction, and I do think that, at least, in some instances, such as with cooktops, knobs actually, do make a lot of sense. One can certainly debate where the best location for those knobs would be to avoid getting splatters on them since Cleaning knobs is not exactly, a fun time for most folks. Some people would assume that installing Touch Sensitive controls in all sorts of consumer products that once used knobs, levers, and buttons, is simply a design trend, and I’m sure there is truth to that. But a little voice inside also suggests to me, that one of the reasons they have moved away from knobs and especially the electromechanical kinds used in the past, is due to the cost of manufacturing. I do not have a data set to support this theory, but if you consider the labour and the bewildering amount of copper wiring that went into something such as a 1950 electric stove, some of which had lots of extra features, you can begin to imagine the cost savings of having a micro “motherboard“ taking the place of all that complex analogue electrical structure. I truly enjoy all of the benefits and possibilities that I have with my smart phone, laptop, iPads, etc. But I do think your instincts for knobs are not without merit, because sometimes, appliance designers attempt to answer questions that no one ever asked. My two. Cents 🤔.