Is there any way to run plumbing to the separate vanity area to make it into a sink? We are doing a gut remodel of our bathroom and we were able to cram in the shower, 5'6" claw foot tub, toilet and two sinks (on adjacent walls though, not next to each other) in a slightly less than 10'x11' space including sloped ceilings and a couple of windows. Here is an older version of our plan for the bathroom but shows the two sinks. The one next to the tub is a console sink (on chrome legs) so very open and the tub is now a double ended tub with plumbing in the middle. Here is a newer plan showing a tile layout I was messing with and the right tub. It also shows a bump out for a knee wall where the new drain is going to run - it turns out there was steel angle along that wall and we could not run the drain line under it so had to go through. It's more of a challenge to get the water there but wasn't impossible.

It doesn't matter how old the thread is when it is the first thing that pops up on a Google search when looking for the answer to this question.....And then, someone repeats this kind of nonsense on a new thread "A bathroom has a bath tub. It's legalese. It's not a "full bath" without a bath tub." I found this gem first thing, while looking up the reference to this exception where New York doesn't require a bathroom AT ALL. §RR306.1 Toilet facilities. Every dwelling unit shall be provided with a water closet, lavatory, and a bathtub or shower. Exception: Owner-occupied one-family dwellings subject to the approval of the code enforcement official. "NYS has several modification to allow construction of owner-occupied single family homes that have minimal technology, and may heat with wood or other renewable source of energy. This language allows, for instance, construction of Amish residences with little electricity (other than battery operated smoke & CO alarms) and with outhouses rather than bathrooms. Hunter camps may have a similar minimalist construction. NYS has a special condition with respect to the Amish population and to the prevalence of minimalist hunter cabins in the Adirondack Park." http://www.dos.ny.gov/dcea/pdf/AmendmentsDisposition2015.pdf

Is it chipped down to the metal? I would definitely not get it refinished, but I would see if you could find some way to at least patch or clear-coat the spots to prevent future water damage. What color is it? We have an original porcelain tub (1928) and when we re-did our bathroom I thought long and hard about refinishing it. I ultimately decided to keep in original condition with it's beauty marks (a few light pits, some tiny black spots) and see how many more years it can go. Anyway, I learned a lot about shining up a tub, and so much of it is tools/techniques/products they use for car body restoration. This article from SF Gate explains how to actually repair a chip yourself.

I know this is an old thread. I'm comtemplating if I want a tub at all but if I get an air or a jetted tub, if the sides have stone around, how do you reach the motor if you need a repair? Just curious if anyone has dealt with that situation. For my current outdated tub, I can reach the motor through the the cabinet; I have a cut out there. I could do the same thing. But adding a slab of quartz to a tub make for a very expensive tub. Dominique, what did you decide and are you happy with your decision?