Need help selecting vanity mirrors, sconces and pulls
How would these look Vanity will be 102" with 9' ceilings. I would put a double sconce (13h x 15w x 8.5d) in the middle and single sconces (13h x 5w x 10.5d) on the ends.
Mirrors are 26"w x 45"h:
vantiy
Shower tile (patterned) and floor tile (solid):
Tub:
Comments (14)
Related Discussions
Need help with dimensions -mirror/bath sconce - pls!
Comments (8)Hi and thanks again for posting. I found my old post (which I should have done in the first place, to find the exact dimensions! Duh) and your reply. Sorry, but we moved out for a bit to avoid the messiest part of the renovations and I'm thoroughly disorganised now. None of the things i mentioned (sink, mirror,vanity, sconce) are installed which makes it harder to see how things would look. This morning I marked the wall with painters tape with the various dimensions and am hoping that this will help me get a better sense of which mirror and sconce to go for. I think the 13" sconce will work best for the space but need to decide on the mirror. The bathroom is small (ceiling height is 7' 11"; space is 5' 7" x 6' 2". The sink/mirror will sit on the wider wall. I think the 12" mirror might be better now that I've marked it out, but am still considering the 17" (actually it is 17 11/16"!!!! Math and precision are obviously not my forte!) since a bigger mirror is always nice...but of course don't want it overwhelm everything else, as Patricia said) Thanks everyone, for bearing with me and my questions! Amina...See MoreHelp Need New Master Vanity Pulls
Comments (17)Sure NEGal. I found cabinet hardware to be very difficult choice. Maybe that is just because it at the end and one is already fatigued. For my master I also wanted satin/brushed nickel, but I wanted texture, 'textured', 'fluted', 'ridged', 'beaded', etc were all search terms I utilized. Fortunately for me, we have 2 stores within 20 miles that specialize in cabinet hardware. It is so great to be able to see and feel and touch. Plus the staff is so knowledgeable. One knob I wanted, the saleswoman said, 'oh let's stay away from that one unless you love it. They are retooling for that finish and it will be 6 weeks." I did not love it enough to want to wait 6 weeks - LOL They also made ordering so easy. So I highly recommend in person shopping at a local store if at all possible. So let's talk about this mirror. How big is big? 36 x 48? I really love this one, but it is only 43 x 31. Check out Ballard Design, they have mirrors in lots of sizes and finishes. I also like to look at Howard Elliot....See MoreNeed some vanity mirror help!
Comments (4)I think those sconces are too small and won't provide much light. I hope you have several recessed lights too. When going with higher ceilings you need to scale up your other fixtures so that things look proportional. I have 10 ft ceilings in my bathroom. My mirrors are 48" high and my sconces are 24" high. The width of my mirror is based on having 2 sinks and 3 sconces above one vanity, so it doesn't relate to your space. There isn't one correct answer for what the width of your mirrors should be....See MoreNeed help figuring out mirror and sconces over vanity
Comments (11)I too have a 66 ( not 60) inch doubke vanity . im doung 2 recessed medicine cabinets and 3 sconces . i chose 2 undermound sinks with widths of 15 inchrs . kohler has a few stylrs of recessed medicine cabinets with widths of 15-20 inches wide , which is what i will go with to use 3 sconces. i have 2 teen daughters and a designated mirror and storage for each will help solve the bathroom banter of fighting over one sink, one mirror etc...See More
sunfeather
5 years agoHere is the vanity layout:
S Reed, I thought the mirrors should be about the size of the sink unit which is 24" wide. The mirrors I'm considering are 26" wide. So, that only leaves 16" between the mirrors in the center.
Joanna Gaines featured the sconces in Magnolia Journal. I don't usually buy this magazine but happened to be looking at it while in the grocery line and saw the fixtures! The layout is very similar to mine. Wish I knew the dimensions of the vanity in the photo.
I'm putting the patterned tile (7.5") as the backs plash.
Counter top:
sunfeather
5 years agolast modified: 5 years agoMy 4 - what did you choose? Would you share your photos?
I did draw it out - but not to scale and for different sconces. I've looked at mirror and light combinations until I almost don't care anymore :-D. If you notice the The magazine photo the mirrors aren't centered over the sinks - difficult to see in my photo. Now I'm wondering about sinks - oval or rectangular, aggh!!!
Ceiling height is 9' rather than 8' as shown in the drawing. So, that would leave about 20" above the mirrors to the ceiling. I think my calculations were incorrect - I was goofy at this point.
PROFocal Point Hardware
5 years agongcurt
5 years agosunfeather
5 years agongcurt
5 years agosunfeather
5 years agoNow I'm obsessing over these fixtures with different mirrors - maybe wood framed. They come in silver-ish iron.
and this ceiling light:
sunfeather
5 years agolast modified: 5 years ago
I got the last two pictured but in a gray iron. Now I need mirrors.
How would these look?
sunfeather
5 years ago
S Reed design