I have the Jenn Air pro style range and like it very much. The control pad is a bit complicated but after a couple of weeks I have figured it out and it is easy now to use and remember. THe oven preheats very quickly and the burners are quite powerful...at least for me. If your knobs are rubbing it is simple to correct -- remove the knob , loosen the screw holding the ring around the knob, and shift the ring a little bit up, down or to the side. It may take a couple of tries to be sure the ring is in the right place.

We installed the Jenn Air Pro Style range, OTR microwave and frig a little over a year ago and I have just loved them. I came back on the appliances forum today because I lurked here so much in order to make my appliance decisions and thought I should follow up with my experience. The range decision really drove the decision on the others, but I'm happy with all of them. The simmer burner is great, the broiler is excellent and clean up is easier than I expected (I just use soapy water and sometimes a little Barkeepers Friend if it's baked on). I did have a service call to replace a burner ignitor that wasn't working properly. I haven't actually tried the other features like convection, so can't speak to that. I will try to figure out how to post a photo for you.

Nice bit of "Jenn-air" history, hvtech42! My only disagreement with it would be to "Lump all the JA products together" in the "History Lesson". I have no experience with the JA cooking products, (cooktops, ranges, ovens~~~etc). But I do have a lot of experience with a Jenn-air Fridge and in fact, I've done a lof of research on them. Back in 2006, I was looking for a 48" built in fridge. Back then, I only had 3 choices, (or at least that's all I could find in stores and on the net). One was GE, since I had a GE S X S full sized fridge I was going to replace, (I could not get icemaker parts even during it's one year warranty)!!, & It leaked and rusted out the sides of the fridge~~sooooo~~~~GE was out of the running, (back in 2006). The other choices were SZ and Jenn-air. Apparently SZ was having evaporator problems back in 2006, (some say it was a copper problem, others say it was caused by copper tubing and aluminum fins on the tubing)~~~~anyway~~~SZ was rated "Dead Last" in reliability by Consumer Reports~~~~yeah I know, but I took time to research the evaporator problem and found out enough about it to scare me off! Jenn-Air "S X S as well has built ins" have been rated the #1 fridge for reliability by readers of Consumer Reports since 2006, and today I believe it is "Tied" with another manufacturer for the #1 position, SZ is about 4 points below, (So not significant, at least to me). The Jenn-Air of 2006 was "Way Ahead of it's Thyme". It offered conveniences and attributes that even most fridges today don't offer. It was one of the first to use the variable speed compressor, very quiet and efficient and great temp control. It has digital readouts and settings for 3 different areas of the fridge, (Meat Keeper, Chrisper and main compartment). It has a 4th digital readout and control for the freezer. It has crank up and down shelves---luv those, so handy when encountering a tall bottle or whatever! The fridge also has built in Diagnostics The disgnostics will check the speed of every fan in the fridge, it will check compressor speed, check the flap operation between the fridge and freezer, all in all about 31 diagnostic test~~~~~sooooo~~~~if I ever have a problem with the fridge, I should be able to pretty well "Nail down" which part is causing the problem and make sure the appliance repair company has it, BEFORE they come out and have a "Look SEE" as they do with most fridge repairs. So, great history lesson, but I think you have to (at the very least) split the JA Fridge from the JA cooking appliances to really see "The Whole Picture"! Unfortunately, today, 2014, it looks like Whirlpool may have removed a lot of the things I really like about my JA Fridge, The crank up/down shelves, The 3 different temp settings for different areas of the fridge, and I would bet money they removed the "Diagnostics" Too!! Gary

I went with the Thermador. I was pulling the trigger on the JennAir, but they said the model I wanted was still in production and several weeks out from arrival. I was offered a great deal on the floor model Thermador above and decided to go that direction. I had a few issues the first few weeks with the Thermador, but customer service was great and they handled all repairs without question and very quickly. Beyond that, I’ve been using it since October and have really loved it. I know that doesn’t help with your situation of deciding on the JennAir offer you received, but my research on the JennAir seemed very positive.