This old thread got revisited. @dani_m08 to answer the question about extra probe, I believe I ordered an extra one when I bought the set up. The probe wire is just setting in the junction box I think but honestly I cant remember. When I laid out the underfloor heating and the probe, I just ran another probe near the first probe, and it was then sealed into the floor self leveling compound as per instructions. then the end was just threaded into the wall like the one that would be live, and not connected, but just laying there in the box. Regarding the tile layout. I just decided to run it this way, after getting instructions on the 90Degree way, IIRC. The herringbone that I love is from my childhood and the side walks in my neighborhood that all ran at 45Degree. so that to me is herringbone. I know you posted on @sochi thread about her amazing bathroom and a wall mounted faucet. I would totally do it if I had the right sink for it. In my case I had made my sink out of soapstone and an integrated backsplash. The pictures of this bathroom reveal are no longer available because of the use of photo bucket, when it was Gardenweb. I did not keep my account with photo bucket. I'll add some of the reveal pictures so you can see the sink and floor. Regarding the sink there is no ledge for water to drip from my hands when using the faucet. The water drips right into the sink. In my other bathroom with a deck mounted faucet I am always wiping up drips and it is a nuisance. I much prefer the setup for this sink. Below: I love the flush finish from the faucet to the bottom of the sink. nothing drips on a counter or edge of a sink. Below: looking in from the doorway. Below: Here I am finishing up the sink. the backsplash was epoxied on as a separate piece. The whole soapstone install in the room took next to nothing to buy as they were all small pieces that I epoxied together with a 3 part stone epoxy. Below: this is the counter at the tub, and is in 2 long pieces but I was able to epoxy them together at there edges to make a wide slab for the top. All the soapstone was finished with a 60 grit sandpaper to be rough and this lovely soft tone of blue/green/gray/white. I did not oil it so this color tone would remain light. Below: If I recall correctly @sochi helped me decide on this Hubberton Forge Mirror. I have 3 different metals in this room, but they are all a cool silver to black color. Below: the center of this tower shares space with the kitchen on the other side of the wall. there is also some extra space that houses some electrical wiring. this is an old simple house. this bathroom was an add on when it got move to the farm in the 30s IIRC. The plumbing was all rearrange and some of the details that were orignially there I kept but updated it, such as this tower feature. The old one went and the carpenter did a wonderful job with this one. Below: This feature was another thing I kept from the old bathroom but flipped it from the other end and had the carpenter put drawers in it. Before it was a hell hole. things got lost and the build was soooo old and creapy I didn't like using it for storage. Now it is perfect for storage.

I haven't seen the picture, but if you get details about the mirror, let us know. The vanity looks a lot like St. Thomas Creations Old Antea. It's nicer, but if you can't find it, the Old Antea would work. I can't be sure, but I think the faucet is Perrin & Rowe Country Faucet. Try Brasslight.com (Milwaukee company) for the best sconces. Good luck. The room is beautiful. Here is a link that might be useful: St Thomas Creations Link

Natebear and snookums2 thanks to you both for commenting. I like the oval and that was always going to be the mirror, the one with the frame #1. Then I found that frame material and it looks lovely with my paint choices and the marble. The vanity will be painted a semi sheen light med gray. The walls are a light gray. Both will have blue undertones that really pick up the hints of blue in the finish on the frame. The sconces may have to go. I really like them but they are bigger than I thought they would look. I bought them online. The vanity will take up some of the depth to help offset the size of the sconces I think. The location of the sconces are set, but the style may have to change. The #s1 and 2 seem safe to me. #8 I am liking now, but it changes moment by moment! HElp! I will not commit to the mirror until the vanity is in in a week or 2. But I want to get some input with what I am thinking, and you guys always come through with great feedback.

Hi Kay Bittner, When it comes to designing you can go so many directions. Luckily we give FREE DESIGN SERVESES from start to finish so you get exactly what your looking for. All you pay for is just the light fixture. We specialize in elegant chandelier lighting. Below are some example of projects we have done. Let us know how we can help. www.galileelighting.com | 305-807-8711