Dont you think that if they had left the machine alone it would still be fine today, other than the plastic squeak? I know as I said before that the old Calypsos had this type hanging system(and possibly GE) and I have heard the Calypso make the squeak and creak noise. As I told you before I hate to have something new with a "flaw" but I have also felt that sometimes I was too picky and would convince myself I needed to get it checked out only to be sicker(& madder)after service. A car for example, have a small rattle, carry in for service, they take half the car apart to fix it, then when you start home you no longer have that rattle, you have three more to go with it where they took things apart--now that is my luck--and I am thinking"Why on earth didnt I live with one small rattle but it is too late to back up then". Just go forward from here and I think I would try another one like you have. It seems like a great washer and you know that the LG made F/L didnt last you very long so maybe this next one will?. OH and about Sears using Electolux now instead of LG for front-loaders, I have always been told it depends on who bid the cheapest to build them. Not sure if that is true but I have heard that. Maybe you need to start looking for the 57 Lady Kenmore!

I would agree with your logic regarding the difference in our numbers on the 'High' spin of 900 vs 1200. Too much difference between 900 and 1400, and yes 900 doesn't seem all that high. Hopefully the tech will have answer. Interesting point on the "Kill-A-Watt" box. Will give it some thought. Your observation and report on the 'Comforters' cycle is impressive! I've observed it only twice and didn't recall the step-by-step sequence. I'm sure it will come with time. I washed a queen-sized mattress pad, not a comforter. How large of a comforter do you wash? I don't recall the dimensions, but Miele had given them for comforters. I thought it to be the size of a double bed, not queen which is what we have. I had the same issue with the machine starting, adding a small amount of water, then advancing to 'pause.' This happened about 4-5 times before the cycle eventually started without stopping. The point you brought out about the 'part that stays in the center isn't exposed to as much g-force' really makes sense. Something I hadn't previously given any thought to. At the end of my cycle, I did put it through a spin/drain just as you do. From here on out, I will first rearrange the mattress pad...thanks! :) We have observed the spring loaded door at the back of the main wash compartment. I believe dispenser drawer pops out during the water intake. Is this a normal action? At times the door can be pushed back in, at others not. Does your dispenser drawer react in this same manner by popping out about 1/8"? I've read other good reviews about the Sears laundry powder. I know powder is recommended over liquid. I myself find liquid too sticky. Is your non-chlorine bleach a powder? I also use Oxi-Clean with favorable results, sometimes adding it to the prewash...or heavily soiled I believe it's called. Previously you had asked if I got cycle descriptions from Miele. The answer is no. I asked if there was anything documented in which would describe each cycle. Same answer, 'no.' What I was told as far as amounts of water, cycles which lend more to cottons will use less water as they can take more agressive tumbling action, and those which would fall under a category of more delicate or light fabric would use more water, as water provides more cushioning for the clothing. We now have an appointment for the Miele tech to come out on Friday and check out our machine. Want to make sure the pause issues we've been having are checked out. Also, 'door blocked' fault has come up 3 times in the first 10 days so want that checked out as well. I am told the cool down cycle time can be incresed as well. Sometimes I find the clothing to be ever so slightly damp, and thought added a little longer cooldown could rectify that issue. Buying a new washer or dryer is sooo time consuming. I've literally spent hours observing these cycles (& calling customer service)...and Miele was our third set after returning both Whirlpool Duet and Electrolux! ;) Will let you know what we find out. Again, thanks for taking the time to enlighten us! :) AN ADDED NOTE: We are interested in observing an actual demonstration on the washer/dryer. I've contacted one of the showrooms and was told they do conduct them. I feel any tips or information learned is well worth it. Our Garmin tells us it's about 67 miles from home...a nice drive on a sunny spring day.

I'm surprised that MJ McPherson's non answer is the top answer. Gary didn't ask if anyone is so structured in their laundry regiment that they never make a mistake or have the need to change cycles once they have started a wash load. I have the same problem with the HydroWave washer where I have paused it to soak for a period of time or switched cycles and lost 15 gallons of water and all that soap when it automatically drained and reset. Very frustrating when it is supposedly a smart and efficient washer. I was hoping someone would have a helpful answer and not a lecture.

You don't say whether your FP washer is a TL or FL. In my opinion and experience, having to buy ANY washer & dryer these days is a dilemma in itself. If you buy some Top Loaders you can have some control over the water level; otherwise, forget that with any and all Front Loaders. My Speed Queen FL (cost $1800) is built like a tank and works like a charm except for the water level (13.4 gal split between washing and rinsing!???). San Diego Steve will tell you that is plenty and he has even posted that he sold that model and bought the newer one which uses even less total water per wash cycle (11.xx gal I think). He and I are in complete disagreement on how 4 gal of water can rinse a set of King size sheets that remain in a wad. So FL vs TL is the first hurdle. I'm not sure how much water a SQ TL uses, but that would be my first question. My FL spins like crazy. I would have bought an FP but they are not sold anywhere in the Dallas, TX area. Maytag used to make a Centennial model which my daughter in law has and it has a deep rinse which fills the tub, but might no longer be made. Sorry not to have any more helpful information. The Chinese factor would scare me off as well with the FP. Good luck and please post your final decision with the outcome. It will be up to date and may help others.