Hey breezy! You and me both! LOL I had a different rainhead when we remodeled Mbath at previous house. It was also large and I loved it! Though when I washed my hair, I sometimes used DH's. ( I have very thick hair) We are probably still a month away of being in. The latests setback was the stair color. I told the GC I wanted kind of pecan colored to match my floor. Some how I ended up with BURGANDY! So, they were stripped and sanded and now 2 1/2 weeks later since starting the staining, they are the correct color. Sometimes I just want to pull my hair out! Good luck on your faucet choices! Bridge

"I could also just get a pull-down faucet for the sink and aim it at the tub to fill it." You could - but you won't like it. The most one of those will fill is 2.2 gallons a minute - some less that that. Divide your tub's capacity by that and you're looking at 20 minutes to fill +/- Not good. beekeeper - I have one of these and have placed more than half a dozen in projects over the past few years. What you get for your money is a machined brass body that mounts in the ceiling or wall and a plated trim piece. The body is a substantial piece of hardware and chrome,brass, nickel plating costs $$$ too. Whether that's all worth 500 + bucks, is up to you. Like davidro says, it doesn't matter what the delivery system is, this is just an opening for hot water to come out of, albeit one with a bit of engineering. GD & Spanish - the splashing is very much dependent on the mounting height of the unit AND the tub selected AND the location of the water column inside the tub. Mine hardly splashes at all. The ones I have seen that splash only do so for a minute or so until their is enough of a pool in the tub to counteract it. Flat bottom tubs with tall ceilings are going to splash more than one from 7' into a sloped contact point in the tub. Besides , we're talking water in a bathroom, generally tiled so what's the big deal ??? It's not like the amount of splash is the same as taking a shower and leaving the door open. 2. While you are correct in that "the water cools off much more than it would from just a regular tub filler", it's not as if it cools off enough for anyone without a thermometer to tell a difference, and a very sensitive one at that! Sure the air cools the water more from a stream falling from 8 feet than one falling from two feet. But bath water that is 100 + degrees is not going to cool down to 90 deg. in the xtra 1-2 seconds it takes it to fall from the ceiling- get real. Additionally , that filler produces a very dense column of water (laminar) that has little to no air in it, so one might argue it will be hotter and less prone to heat loss than a "regular" filler that introduces room temp air into it's stream - thus cooling it off on it's way to the tub. So don't worry Spanish -your tub will still be plenty hot with that filler if you choose it. IT'S A NON -ISSUE people. I've already alluded to the real issue for lower tub temps - FILL TIME. That's directly related to the delivery system ( valve). If your valve and accompanying filler will only deliver 5 gallons a minute it's going to take a while to fill an 80 gallon tub, and there will be some heat loss. Select a valve that delivers 20 gallons a minute and you can be soaking quicker that most people can undress. Here is a link that might be useful: laminar valve body - see page 2

I have 2 windows (with faux wood blinds covering them thank you) at right angles above the tub in the master bath, so no wall art there. However, I do have a prominent piece of wall separating 2 mirrors over our vanities.........This wall is crying for something but I haven't found it. The other day, I saw some really pretty decorative wall clocks and have been thinking about that. For some reason I wasn't sure if it would be odd to have a pretty wall clock hanging there, although honestly it kind of makes sense. What do you think? The ones I saw (at Ross or TJMaxx) were round and had nice detailed frames. I am linking a nice substantial one I just saw on the o site, just wondering what the decorating experts here think of a decorative clock as a piece of décor in a bathroom.square not round but a pretty clock

The tub controls should be accessible from both inside and outside the tub and be located between the rim of the bathtub and 33" above the floor. Building Code Requirement: No International Residential Code requirements. http://starcraftcustombuilders.com/bath.design.rules.htm#.WwbIg_ZFy8z