I would Remove the spark plugs or plug and see if it spins easily and watch for raw gas shooting out in a mist? especially if I smelt raw gas (if so your carb. float maybe sticking flooding the comb. chamber and wetting the spark plugs if it is gravity feed fuel system"? that comment was meant for you the orginal poster! Did you not read it? I think you answered your own questions. I filled the gas tank before storage and now there was not gas in it? Muffler was wet? when I changed the fuel filter odd no fuel in line? I'm too lazy to look up the model you posted, does it have a fuel pump or is the gas tank above the engine? I would quess that the carb. float stuck and leaked all the gas out through the exhaust ( if the exhaust valve was open during storage? I would also check the oil for gas in it. A good sign would be it way over filled or you smell gas in the oil. IF so drain the oil and refill. Now I would go back to the carb. find out why it leaking gas? probably the float needle not seating alowing gas to seep pass. I also think the reason it wouldn't turn over was the cylinder or cylinders was full of gas causing a hydraulic seizure. I would remove the carb. bowl again (if you can reseal it without creating a leak) spray down the float and seat with carb. and any small passages you see. install the bowl, prime it and see if it will run. You may have to prime it several times till the bowl fills up with fuel. Copied and pasted from the orginal post

Have you tried downloading it from the actual Malwarebytes site? If not, here's the site. https://www.malwarebytes.org/downloads/ Try downloading it without removing the first corrupted version and see if that works. There was a replacement for the first program update [issued on 4-1-14] and according to my own download files, it was issued on 4-6-14. The actual build was 4-3-14. The latest version is 2.0.1.1004 If you have no luck with my advice...I strongly suggest that you contact Malwarebytes directly through their website. I can tell you from personal experience that they are wonderful people to do business with and always eager to assist. I should add that I have the paid version of Malwarebytes but that shouldn't make any difference with their help. Many moons ago I started out with the free version and went on from there. HTH Anne

I would try one of 3 options there perhaps. Someone else may come up with a simpler fix if you care to wait a while, you are in no danger. Reboot and try again. Or open Windows Explorer, find and delete the log file mentioned and try the install again. Failing that I would download the whole Zonealarm program (being sure to stay on the free version). Then remove your internet connection, use the Add/Remove to get rid the current Zonealarm and install the downloaded program. Here is a link that might be useful: Free Zonealarm download site

Hi Zep, Here's the information from the Whocrashed report. System Information (local) -------------------------------------------------------------------------------- computer name: LYNNDELL windows version: Windows XP Service Pack 3, 5.1, build: 2600 windows dir: C:\WINDOWS Hardware: Inspiron 530, Dell Inc., 0FM586 CPU: GenuineIntel Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz Intel586, level: 6 4 logical processors, active mask: 15 RAM: 2950799360 total VM: 2147352576, free: 2022486016 -------------------------------------------------------------------------------- Crash Dump Analysis -------------------------------------------------------------------------------- Crash dump directory: C:\WINDOWS\Minidump Crash dumps are enabled on your computer. On Tue 6/10/2014 9:46:41 PM GMT your computer crashed crash dump file: C:\WINDOWS\Minidump\Mini061014-01.dmp This was probably caused by the following module: win32k.sys (win32k+0x5FC9E) Bugcheck code: 0x1000008E (0xFFFFFFFFC0000005, 0xFFFFFFFFBF85FC9E, 0xFFFFFFFFADB9BAE4, 0x0) Error: KERNEL_MODE_EXCEPTION_NOT_HANDLED_M file path: C:\WINDOWS\system32\win32k.sys product: Microsoft® Windows® Operating System company: Microsoft Corporation description: Multi-User Win32 Driver Bug check description: This indicates that a kernel-mode program generated an exception which the error handler did not catch. This appears to be a typical software driver bug and is not likely to be caused by a hardware problem. The crash took place in a standard Microsoft module. Your system configuration may be incorrect. Possibly this problem is caused by another driver on your system that cannot be identified at this time. -------------------------------------------------------------------------------- Conclusion -------------------------------------------------------------------------------- One crash dump has been found and analyzed. No offending third party drivers have been found. Connsider using WhoCrashed Professional which offers more detailed analysis using symbol resolution. Also configuring your system to produce a full memory dump may help you. Read the topic general suggestions for troubleshooting system crashes for more information. Note that it's not always possible to state with certainty whether a reported driver is actually responsible for crashing your system or that the root cause is in another module. Nonetheless it's suggested you look for updates for the products that these drivers belong to and regularly visit Windows update or enable automatic updates for Windows. In case a piece of malfunctioning hardware is causing trouble, a search with Google on the bug check errors together with the model name and brand of your computer may help you investigate this further. ------------------------------------------------------------ I'll try reinstalling Firefox, but I'm doubtful because during the course of today - after my initial Firefox difficulties, I did update from Firefox 29 to Firefox 29.0.1. So I can re-install 29.0.1, but installing it this afternoon did not fix the problem. I'll check back later. And now I'll reinstall. Thank you. Lynn.