You’ll want/need to buy stainless steel screws. There should be short ones already in the door that you can take out and match, but get longer. For my dishwasher, the install involved taking these shorter screws out that were in place in the naked door and switching them to longer ones that then attached to panel to the naked door. At the bottom of the naked door there were spots for little clips that you lock in first before you screw in the screws. Without the clips you can probably just use more screws, but it might be trickier to get the door perfectly straight. There are quite a few short screws in the door to allow different door combos, for example a single door panel or a drawer front + shorter door combo, so you can use several sets of screws holes to attach your door. As for your door thickness, I think it’s more a question of weight than thickness. I can’t see why the thickness would be a problem. But the weight of your thick panel might create challenges. A new panel ready DW generally comes with door spring tension set for the average weight of a custom panel. I’d say that’s a 3/4”-1” thick solid wood door. (This means the naked door is very hard to open with no panel attached). Your thicker door may be notably heavy compared to what they’re expecting. So you may need to adjust the spring tension, or your door will crash open as you pull it down. My vague recollection from the instructions was that there’s a way to adjust this tension, but I’m not sure, as I didn’t have to adjust mine. But it might be worth researching to confirm before you commit to 1.5” thickness… or maybe you’re better off going with just drawer fronts attached to a frame instead of a solid plywood layer to keep the weight down. Good luck!

Hi - new forum member here. I participate in a few GW forums and came across this one when I did a search for the Mary Jane Shoe Template. I came across this one and hope it helps for whomever is looking for it. I am brand new to card making and paper crafts and just want to say I look forward to seeing what everyone is doing and posting my own things. Sal Here is a link that might be useful: MARY JANE SHOE TEMPLATE

Ditto the above post! It's great to get that kind of visual, because once everything is set into place, it's too late if you don't like it!

I'm sorry, but fabrication is expensive and these countertops are expensive and so I don't see how working with a customer to make sure they like the templating is "donating time." Are you saying that people spending thousands of dollars on countertops should just take it however the fabricator decides (which would likely be whatever is most convenient for him and never mind how it looks in the end or if the customer likes it)? There are several people in the trades on this board who seem to have rather dim views of their customers. I don't understand this because you make your living off of these people. I do understand that some people are more difficult than others, but that's how it goes, right? I interact with my clients every day that I'm at work. So, I do understand how some people can be, but...there are so many threads on here with photos of stuff that's really not acceptable. My Dad worked in construction. He did work for both general contractors and for individual homeowners. He took pride in his work, did a good job and wanted his customers to be happy with the work he did. He had no problem taking time to make sure these things happened and he worked REALLY hard, often in unpleasant weather, to produce a good quality finished product. I never heard him complain about anything...not the heat that he worked in over the summers, the lack of bathroom facilities on many of his jobsites, the condition his job left his hands in, etc. He never complained that his customers wanted a good job or that he had to spend time with them. He also didn't gouge people or charge more when he was busy. He didn't call any of his customers a PITA or try to charge anyone a PITA fee or anything like that. I see many tradesmen, contractors, etc., these days, who seem to have really big egos, look down on their customers, try to take advantage of customers whenever they can, who feel entitled to be paid a lot of money for a minimum amount of work (or poor quality work), who refuse to take hard jobs because they are only looking to do what's easy, and who take no pride in their finished product. I'm not saying this is anyone here, but I am saying that you often seem pretty quick to criticize the customers, who are paying a lot of money and who mostly just want a good job in exchange for their money. Overall, I've been very disappointed with most of the people I've hired to do work on my home. No, I've not hired anywhere near the cheapest guys and, yes, I've been willing to pay for someone who does quality work. You can jump to calling me a PITA, if you want, but then we could talk about how much I've paid/been willing to pay (much more per hour than my husband or I have ever earned and we make a decent living) and I have photos to show the poor quality of work these guys have tried to leave us with. We could also talk about the way some of these men have acted in my home (regarding bathroom facilities that I provided, the use of my refrigerator/icemaker, etc.) and about the shocking lack of any work ethic (sheer laziness and lack of any pride in their work, not caring about the quality of their work and trying to take advantage of us in many ways, including by trying to pass off horrible quality work as perfectly fine/a good job) some of them have displayed. We could also talk about the various lies we've been told by multiple people we've talked to about doing jobs. Thank goodness we know enough to mostly prevent ourselves from being taken advantage of... Then, we could talk about the experiences of a good friend who is a single woman and how everyone she has hired over the past 15 years (and she's paid them a LOT and has never tried to hire anyone on the cheap) has basically taken advantage of her, charging a LOT and then doing subpar work. Things have changed, and not for the better. It seems that you can't trust anyone these days. I'd NEVER pay thousands of dollars for new countertops and then not be present for both templating and installation. If someone tried to charge me for that, I would find someone else. If I couldn't find someone else, I'd put in countertops myself (tile, butcherblock or maybe cut soapstone myself--which is what a family member did and it looks beautiful) before I'd allow myself to be treated that way.