I moved the switch but could not eliminate the old box that held the old switch. There was power coming in and a feed to another point in the house so I removed the switch and used that wire to get power to the new location. I then covered the box with a full plate. All the other connections worked well. Thanks

Lot of ideas here... https://www.houzz.com/photos/exposed-electrical-ceiling-wire-phbr0lbl-bl~l_41462 200 pages worth supposedly.

I've attempted wiring with both alternatives attempted; one time capped yellow wire, the other time purple was capped. It looks like I'm on positive side this time but not sure to see it as complete. Better than previous experience - that circuit breaker did not trip so power to the room remain intact. I did not finish my entire work of fixing fan yet but attempting only to see if wiring works. So, the best test I see is to see if the light will turn on and next step is if possible to see if fan motor turns with out blades fixed. Every time I turn on the switch I see lights flash and go off irrespective of what I'm doing with remote (yes, each time). Reference Video: https://drive.google.com/file/d/0B5s...piZ2ZEclE/view Quick internet read relates mentioning: I've attempted 1 and then 2 CFL bulbs each of 13 watts, each light holder on fan indicates max 14 w can be attempted. I've to attempt 9W LED bulbs that came along, may be that can indicate something to me. In general what I expected is lights will stay on and relate to remote actions. And so fan motor may turn if I do so on remote. I think all remaining work is mechanical (like fix blades and give it a final shape). I'm also sure remote battery is as new as fan came along fan package and so far not yet clicked more than 10 times. This is making me to think to think if I can move ahead finish all of it and then attempt. Any one sensing problem with that flashing or that flashing light indicate everything is going to be good when done? Thank you all and any insights is very much appreciated.

one fan centered as possible.