Historic residential architectural styles were not based on a "look" but a collection of specific cultural, experiential and architectural influences that were adapted and modified by architects and builders often but not always retaining much of the original intent. American Colonialists brought the Post Medieval style from England but substituted local materials (lap siding and wood roofing shingles instead of stucco, half timber and thatch). As the colonies prospered they adapted and modified the more fashionable English styles that were based on Classical (Greek & Roman) designs from the Italian Renaissance. We know these styles generally as Colonial and specifically as Georgian, Adam, etc. They were later used as inspirations for the Colonial Revival styles. In the case of the Craftsman Style, it was originally developed in southern California by the Greene Brothers. They were architects influenced by the English Arts & Crafts movement, oriental wooden structures and formal training in wood & metal working and designed intricately detailed handcrafted houses of natural materials that joined the interior with the exterior. These designs and much simpler variations were published in many American magazines like The Ladies Home Journal, Good Housekeeping and The Craftsman and were quickly adopted by pre-cut material supply companies that sold mail order kits. This resulted in the rapid spread of a watered-down version of the Craftsman Style bungalow across the country. This is why it is difficult to find a Craftsman Style house that retains much of the inspiration or detailing of the Greene brothers. A similar thing happened when a vernacular version was developed of the Prairie Style. When a historical architectural style is reduced to a "look", it usually only retains the name for advertising purposes. When I see the term Craftsman it tells me virtually nothing except that the house is unlikely to have classical detailing but you can never be sure without a photo or drawing.

After creating and saving a Viking Rose file (HUS) which has positions 1,2, & 3 on a 5 x 7 hoop, I transfer it to an Ultimate card. When sewing it out, positions 2 & 3 are always mis-aligned. I have a Vista operating system. I do my customising in VIP Customising (HUS) and Embird32 2010. It makes no difference from which program I save the design, it never stiches out in the proper position (2 & 3) of my 5 x 7 lapped hoop. When I used to have Windows XP and a Viking card reader box, it always worked right. The new computer does not have the old 25 pin hookup, so I cold not use the old box. Is there an adapter which will switch a 25 pin to a USB that will work, or does the Ultimate Box have a fix for this? The Ultimate Box sure does not work!!

A KVM switch can work very well. Just make sure it can handle your hardware. All the keyboards and mices must use the same interface, and the monitors may have difficulty if you are using high resolution displays. VGA works fine, but if you are using a "full HD" monitor, be careful.

My guess is perhaps an oven element problem or a thermostat. Or it could be a circuit board.