Tropic brown, tan brown are two others. There are very dark golds like Juparana Tobacco or Paradiso which might work. You might also consider something like teak wood. Etching leaves white marks. On a brown marble it will be very visible. For fun, I got a two buck pink marble tile from the box store and had "science" when I was trying to decide about counters. Science consisted of pouring a small qty of lemon-lime soda on a bit of the marble and seeing if I could get it off before it etched. The answer was NO! I would suggest you spend a couple bucks to get a tile similar to what you want to use and have your own science project.

stacey, I totally sympathize! It took me forever to make up my mind about countertops. My island sat for 2 months with no top at all because I wanted to make sure I made the right decision. I agree with holligator that most of your inspiration pics don't have both wood floors and wood counters. For example, in the inspiration photo you said was from mamadadapaige, the white tile floor supplies the contrast. They've also broken up all the wood with a very dark countertop on the perimeter. If you're looking for a top that will still look new in 3 years, I'm wondering if wood is the right choice. Wood is softer than stone and scratches and dings more easily. I have a wood top on my hutch that is stained to match my island. It has lots of scratches on it already. It's only been in for 4 months and I've had to use the touch-up kit numerous times; consequently, it requires much greater care and maintenance than my marble. I'm not going to push marble on you because I actually think the Costa Esmerelda provides just the right amount of contrast and would be the smartest choice for resale. However, if you're considering marble, you won't have any stains if you seal it a couple times a year. I'm not sure what type of marble appeals to you, but Carrera, for example, is much, much cheaper than any Silestone/Caesarstone and many granites. Perhaps you can ask people who have had marble for 3 years or more to post photos or share their experiences with wear and tear. And here's a photo I found on the Crown Point website with light counters and what looks like a wood top on the island. The wood top matches the floor while the island is darker. I like how they injected color with the backsplash, which along with the contrasting white of the trim and hood keeps this kitchen from being too monochromatic and ho-hum.

Marti, you cannot go wrong with a stainless steel sink undermounted. I HATE to clean the rims of a kitchen sink which is bedded from the top. Gunk always collects. And here is the sink I bought from Overstock.com but not yet installed. I have all my appliances out in the Teahouse waiting. That is called "planning ahead," and their cost will not be included in the remodel cost of the kitchen. Been buying things for almost two years now. Still must get the pendant lights, but we'll decide on that a little later. By WE I mean MOI. DH said he was staying out of this. :) My sink 30 x 18 x 10d made by Kraus. SOUND DEADENING ADDED.

These are my pics of my countertops placed Friday June 22, 2018. I cried looking at these seams. It looks so cheap. Fabricator explains that's the way it comes. I explained that I shouldn't be able to see the seams so clearly. It looks so unprofessional. They ended up taking them back to their warehouse. In hopes they say if it is quality control will try and fix it just to make it look better. Otherwise I will have to pay an additional fee for them to come out again to install. I just don't know what to do and if still looks the same. This is the first time I've replaced my counters in 24 years. I don't and can't live with it. looking at this for another 24 years. It looks so cheap and it really was not it's a lot of money to me. I hope fingers crossed that they will fix this problem. They never told me that there would be such seams. I thought the edges were done by a machine and it would be all one piece. I have read up on this and now understand there are seams. But now I do know that they should not look like this. If they are good fabricator you shouldn't be able to see them so clearly. I will find out next week what happens.