I'm really hesitant to step between the gunfire on frontload vs topload but after reading the last couple posts, a couple things come to mind. I have no real experience using a frontloader but am considering one to replace my 29 year old toploader if and when the time comes it needs replacement. Now as far as cleaning efficiency being the same, I'm not sure I'd agree. "Efficiency" would take in a number of criteria and not to get overly longwinded on it suffice to say that the efficiency of the tumble action seems to be better, and certainly a heater to bring up the water temp to help clean whites is a demonstrated advantage and using less electricity and water are undoubtedly advantageous and certainly leans toward saying that many FLs are more efficient than TLs. I'm a bit hesitant on a frontload when it comes to cleaning pet hair given the probable advantage of the deep rinse, however there's a lot of FL owners who have pets, so it probably is more hype than reality, just as the claim of topload agitator machines being so hard on clothes. Fer cryin out loud, I have clothes I've been washing for over 20 years that are still in serviceable shape and I don't believe a frontloader would make them last longer so that "clothes shredding" contention is dubious to me, and not the case here. Will I recoup costs on water and electrical savings by buying a FL instead of a TL? I doubt it. But I think that the heater and faster spin speeds would be nice features to have available for certain applications. Will I buy a front loader? I don't know. The price is a factor. The longer cycle times on a FL are a concern, but not a big one since I don't do that much laundry. After all, I generally wait until the load is dry before putting in another washload anyway so I'm thinking that might not be a real concern. Another factor is the ease of loading and unloading a top loader. My physical problems would require a rather high pedestal for a FL or use a TL. I decided against the TL dryer based on cost and went with a homemade pedestal to raise the dryer for ease of loading and unloading. So, was I a betting man, I'd say the odds are 60/40 in favor of me going with another topload machine (which could include a Fisher & Paykel, Harmony or Cabrio) but I'm intrigued by the possibility of a FL. So in the end, there's pros and cons to each style. There's radical views on each side with near-hysterical claims that need to be sorted out. Each person and their need is different and contrary to what some claim, both styles will clean my clothes just fine. I need to decide what's the best value for me and give me the features I need most. There's nothing wrong with getting what you're comfortable with and what you want, as long as you can afford it.

I did all of the typical Internet research before replacing my twelve year old Sears top loading washer and matching dryer. I was tired of a dryer that took twice as long as the washer to complete a cycle---laundry room backup. I had heard all sorts of rumors about the front loaders not getting clothes clean, bad smelling clothes, mold, mildew, repair issues and so on. After narrowing it down to LG, Whirlpool and Bosch, I went with the Whirlpool Duet washer and dryer in the 9200 series. In that brand we are talking a level below the top price point. I am confident that Bosch and LG make fine machines. LG Electronics, a South Korean company has been making front loading washers for decades. Front loaders are typical in the rest of the world---only in America do we see so many top loaders. Remember: the very first automatic washers were front loaders. The more you pay, the more cycles and features you get. There is a point of diminishing returns not to mention the fact that more gadgets can mean more things to go wrong. One name manufacturer has a dispenser system which you fill with detergent and bleach and it dispenses the stuff through multiple loads. A technician who services that brand informed me that the feature is---from a repair call perspective---a weak link in an otherwise fine piece of equipment. After decades of doing so, we all think we know how to wash clothes. The most important thing I can recommend is to READ THE OPERATORS MANUAL! Secondly, do some research and if the sales person doesnt seem to know what he is talking about, go somewhere else. Ask whoever you buy from if they actually set up the machines or just drop them off in your laundry room. If they dont level the machines, hand them a level and make sure they do so, which leads me to vibration. These machines spin at a very high RPM; 1,000 RPM is very typical while the top of the line LG machines (Tromm) spin at 1,320 which is why the clothes come out nearly dry and dry so quickly in the dryer. Mounted on a concrete floor or modern trussed floor, leveled, spaced a couple of inches apart and without the pedestals, the vibration during the spin cycle will not be an issue---these machines are remarkably quiet. Each variable you add will increase vibration. On solid flooring even with the pedestals if all else is equal, the noise and vibration factor should still be less than typical top loaders. However, on wood flooring, on a upper story in an older structure with an unbalanced load, on pedestals, unleveled and too close together---the darn thing is going too shake the house. Several manufacturers make machines specifically for upper stories with lower spin speeds. HE detergent is not an option---it is a mandate! Simply using less regular detergent doesnt work. In fact, if you read the HE detergent label it indicates that you should use barely a quarter to a third of a cap for normal loads. A friend who services appliances told me to use even less than the detergent maker recommends. More detergent will not get your clothes cleaner in a front loader. Suds from conventional detergents will ultimately screw up the machine, not get your clothes clean and drastically extend the wash cycle and your energy usage because the machine has to enter a SUD cycle to get rid of the excess suds. If you use the minimum recommended detergent for most loads the HE is not more expensive than convention detergent of the same brand---it may well end up being less expensive. Cheer, Gain and Tide are all available in HE and more are being added. Many service techs recommend powdered HE detergent over the liquids and claim that powders dont leave the film that most liquids do---which forms a basis for mold growth. I cant personally attest to it but it seems to make some sense. If you use powder, you can add Borateam or Oxyclean to the dispenser with the powdered detergent. If you stick with the liquids, any powdered additives should be placed in the bottom of the drum before adding the clothes. Throw away your fabric softener! It gunks up machines worse than any other additive---it has wax in it for gosh sake! It makes towels less absorbent. It leaves a film on the outer drum that you can get to to clean. If you have hard water, consider buying Calgon Water Softener available in the supermarket and adding it to the rinse water. You might also consider adding some 20 Mule Team Borax or Borateam either with the detergent if you use a powder or in the bottom of the drum if you use a liquid detergent. Front loaders have to seal completely or the water will leak out---unlike top loaders. That means that the interior stays damp after you close the door. Leaving the door ajar for an hour or so after you remove the load will help it dry out completely---leaving it cracked open all the time makes even more sense. Consider keeping a spray bottle of something like Sams Clubs OdoBan and a rag next to the washer and wipe off the seal periodically---to include underneath and the front lip which faces inward. If your machine has a machine cleaning cycle, run it as recommended. The newer machines tend to have this cycle and it specifically jets water around and under the seal to clean and sanitize it thoroughly. If you start getting excessively long wash cycles or fault codes, it is possible that someone didnt empty their pockets and something is clogging the pump filter which also tend to preclude complete drainage and add to the potential mold and mildew issue. If you are going to spend two to three grand for a washer dryer pair, seriously consider a service contract---$120/unit for five years in my case but you can often negotiate these down with the salesman. The average service call to clean out that filter is $115. If you are handy and confident, you can unplug the machine, remove three torq or hex screws on a bottom panel and do this task in a couple of minutes. I would not buy any brand in which this pump filter is not "reasonably" accessible. If you have a service contract, then they will handle the task but you may have a deductible. Very cold water doesnt wash clothes very well; at 60 degrees Fahrenheit and below, detergents just dont emulsify as they should. Many front loaders have an internal water heater so that even if you select cold wash, it will heat the water just enough to make it work with detergent. This is a very valuable feature in ensuring proper detergent dispersion and helping prevent mildew. The typical front loader uses a quarter of the water that a top loader does. If you are using cold water to save money, youve already save 75% of the cost of heating water for a load. Warm water will always wash better than cold. Mold and mildew: if you leave a wet load of clothes in a front loader overnight or all day while you are at work, you are asking for mildew problems. Its a sealed container; unless the clothes have been sterilized or at least sanitized, the drum---and clothes---will grow mold and mildew. Use the delayed wash feature available on many machines---most will tell approximately how long the cycle will take---so that the wash cycle ends right before you leave the house or come home. Follow the recommendations in the manual for proper loading and mixing of items. Put your baby socks and thongs in mesh bags---they end up in the pump filter too easily. As with any washer, full loads are preferable but front loaders dont typically handle very small loads as well as top loaders. If you need to do a small load, consider throwing in a couple of those designer towels that have been hanging in the bathroom for who knows how long. If your family insists on throwing their wet towels on the floor or shoving them in the bottom of a hamper, you are going to start with mold and mildew problems. Molds, yeasts and mildews are very hard to get rid of once they start to grow. Short of very hot water and chorine bleach---over multiple cycles---you are fighting a lost cause. Are front loaders "harder" on clothes than top loader/agitator machines? The opposite should be true. One measure of how much of a beating your laundry is taking is the amount of lint that collects in the dryer lint filter when you wash a relatively new, predominantly cotton item. Occasionally I buy 100% cotton rags (terry) to use around the house and in the garage. I always wash them thoroughly before I use them to get all of the starch and chemicals out. Two dozen of these relatively low end, imported rags used to throw of so much lint after a full cycle in my top loader that I had to clean the lint filter several times during the initial drying cycle. The first time I did a load of new rags in the front loader I was astounded at how little lint buildup there was. I used to be in the hospital bedding and apparel business and have visited numerous fabric mills---you dont even want to know what it takes, chemical wise, to produce a sheet, towel or item of apparel. You really want to get that stuff out of the fabric before it touches your body. I digress---back to the smelly towels and such. You can try Oxyclean, OdoBan or Borateam---or all three---but on fancy, designer towels you probably wont be willing to risk either Chlorine bleach or super heated water. Drying them occasionally outside in the bright sun helps. Using soft water or a liquid water softener (Calgon ) may help. Getting all of the fabric softener residue out of the towels will certainly help. Drying them completely is essential, particularly with heavy towels. If your towels are smelly indicating the existence of mold, yeast or mildew, you may not notice it when you take them out of the dryer but probably will the first time you use them and get them damp. It is easier to prevent the mold and such than it is to eliminate it. If youve already got it, it will probably take several cycles to get rid of it. Another approach might be to explain to family and guests that the designer towels are just for show. Go to Costco or Sams and buy pure white, hotel grade towels, bathmats and washcloths. Theyre really not expensive---and they are made to be washed in institutional laundries at very high temperature with both peroxide and chlorine based bleaches at high concentrations. Run them through the washer on the highest temperature possible, often called a sanitize setting. Washer technology had improved dramatically in the last decade---dryer technology really hasnt changed much. If you have gas, consider using it instead of electric; the dryers cost fifty to a hundred dollars more but in many---not all---parts of the country gas is cheaper than electricity so you will recoup the difference fairly quickly. You should be able to get information from your utility company, from a local appliance service or on line regarding the cost differential. If you live in an area where electricity is produced using coal, than electric may be break even or even cheaper. If you live in the southwest or Texas, natural gas is generally more cost effective. A couple of companies make hybrids---top loading without the agitator---but there seem to be issues with those machines either in design---or in the fact that people dont know how to use them. In summary, assuming you can reeducate your family, the most important things you can do to prevent mold and mildew in a front loader and the resulting smelly clothes are: Read the manual. Leave the door ajar long enough for the drum to air out or anytime the washer is idle. Use HE detergent only. Stop using fabric softener. Run the machine cleaning cycle as recommended. If your machine doesnt have one, run a regular cycle with hot water and bleach---no detergent---periodically, at least once a month or more often if you do a lot of laundry. Dont leave wet clothes in the washer all day or all night. Follow the loading recommendations. If you have hard water and dont want to/cant install a water softener try using Calgon , Borateam or even baking soda in the wash water. Vinegar (white, pretty cheap by the gallon) can be an effective fungicide but its going to take more than a tablespoon; try it instead of softener in the rinse cycle. Havent tried the idea of using some powdered, enzyme based dishwashing detergent to clean the front loading washer but it makes sense. I called my friend who services all sorts of appliances and he indicated that he even recommends it even though the manual doesnt. There is also a commercial product available on line at www.smellywasher.com that many repair techs seem to endorse. By the way, if you prefer scent free HE detergent I know Tide has one---not sure who else does. We love our Whirlpool Duet front loader washer and dryer. Laundry room backup is a thing of the past. Comforters that used to take two hours to dry are dry in under thirty minutes. The clothes are really clean. Our electric bill has gone down. There is less lint in the dryer vent---because the clothes arent getting as beat up as they did by that center agitator on a conventional top loader. They are both remarkably quiet but making the switch requires some reeducation. When I read complaints from people who wont read the manual, wont allow the drum to dry after each use, refuse to use the right detergent and cant be bothered to perform a few seconds of preventative cleaning and maintenance, I throw up my hands in frustration. If that is you---dont buy a front loader! I dont want to sound like a commercial but no matter what other detergents I try---because they are on sale or whatever---I always end up back with what my mother and grand mother used---Tide. I made the switch to liquids a few years---smaller package, easier to measure, less spillage but also too easy to use too much! Based on what I have read and heard from several appliance techs, Im switching back to powder because I believe it works better in front loaders and cause far less film buildup than liquid. Also you can add powdered additives---Borax, Oxyclean, washing soda, baking soda---with them in the dispenser.

There's cold than there's cold...I think temps for cold fall between 75-85F..below or above I wouldn't rely on for stain removal of blood and some other stains otherwise it can be risky...cold water below a target cold causes fabrics fibers to close up, constrict, trapping stains and causing them to adher to the fabric just the opposite of hot which causes fibers to **open up** and baking the stain into fibers. Rocs cold temp of 86F would not be concidered cold. That's pretty much what temp I'd use for stains.. Alex your 55F was way to cold IMO but it came out, which doesn't mean it will next time LOL.

The door asembly actually fills with water. It seems like the tub fills then doesn't drain, then water leaks out front and fills door. If you see the photo, the water line is water in the door. I really hope that we can make this one work. It's probably best to save money at the moment. Overall, this has been a great washer. My parents used it for 4 people + 5 family members joined house for 1 yr. We bought house, so now serves our family of 5 + my brother's family of 6 for 6 months last year while they were moving. Lots of kids and laundry. Constantly washing, and probably lack of attention to maintenance. We'd never cleaned the supply screens before. Oh, and our softener died last year and I'm sure that didn't help. Actually think hard water contributed to the demise of our dishwasher. Got a wonderful new Kinetico. Less salt and better water so much easier on the appliances. I don't know if we want to replace many parts. It looks like all the parts that "could" be the problem would add up to $400. LG seems to have most problem free reviews on consumer reports. Yes, we also liked the easy access trap. I do like that Maytag is made in America but my husband doesn't like the brand (not sure why).