Bump!

I have a GO Video (Model DV1030) combo DVD-VCR. When trying to set up my Direct TV remote control to operate the DVD-VCR, the codes provided in the Direct TV guide (20783 and 20715 for DVD; 20432 for VCR) do not work. I sent an email to GO Video, but so far, have hear nothing from them. Does anyone have codes that will work for my unit? Thanks for sharing.

I need help. I bought a new 42 inch screen Magnavox HD TV set. We are a member of the Direct TV Satellite Cable Network. The dish is outside of the house with a coaxil cable entering the home to a black box that sits beside the TV. A coaxil cable leaves the black box to a Power Surge Protector Electrical strip. Another coaxil cable leaves this connection to the TV back input area. The TV channels, volume, etc are controlled by the handheld Dish Remote Control. The Magnovox TV remote is not used. I have a Symphonic DVD Player and the red, white, yellow wire set and its own remote control. I have an Emerson VCR with a coaxil connector wire and its own remote controller. I do not know where to connect the VCR coaxil wire to the TV. The TV set has overall, 3 sites for the colored wire connection ports. (1) an area on the left side near the back of the screen for the yellow,red,white connection, and 2 separate areas called line 1 and line 2 connections (but a double set of plugs of red, white and yellow colored ports in this assembly)which is very confusing. Which row do I use? Goal: I want to know how to connect the VCR and the DVD. They are to be used separately. Do I hook up these 2 separately at the varied colored port areas, and they run independently with their remotes? Do I connect to the black box? Do I run the DVD through the back out hook-up of colored ports to the colored inports at the VCR front area and connect to the TV via a coaxil somehow?....Is the black box involved or bypassed? Please keep the insructions simple. The 3 sets of appliance directions are too confusing. I am having trouble with each appliance and the individual directions are not helpful to me with the currently used Direct TV Dish system. Thank you in advance.

Short answer; match Outs to Ins. One of the "Out" connectors on the back of the satellite box should connect to an "In" on the TV. If you want the VCR in the middle so you can record from satellite, the Sat "Out" goes to the VCR "In" (or antenna) and the VCR "Out" (or TV) goes to the TV. Much longer answer; It depends upon what different types of connections you have, how picky you are about video quality, and how many inputs your TV can take. Component video is higher quality than S-video, which is higher quality than Coax. You may or may not have to take pictures or describe whats on the back of all the boxes.